Abstract:A huge amount of red mud was produced in the Aluminum industry which is environmentally hazardous and hard to de-alkalize or recycle due to its enormous amount and low value for recycling. To solve the problem of red mud treatment, a facile, scalable, and environmentally friendly quasi-closed-loop approach for red mud recycling was utilized to recycle it as Li-ion battery anode material by a simply alkali-roasted carbon-coating method, which can effectively solve the problem of red mud treatment and recycle it as high-value Li-ion anode material. Alkali-roasted carbon-coating red mud (RA/C) shows remarkable electrochemical performance compared to current works related to red mud recycling and ferrosilicon-based anode materials, the initial reversible charge capacity reaches 1746 mA h g −1 at 0–3 V under 0.1 A g −1 . Cycle-driven and pseudocapacitance-boosted enable RA/C to exhibit outstanding rate performance (1106 mA h g −1 at 10 A g −1 after 259 cycles compared to 910 mA h g −1 for initial discharge) and cycling performance (2538 mA h g −1 at 1 A g −1 after 500 cycles compared to 830 mA h g −1 for initial discharge). This work discussed dual mechanisms of cycle-driven and pseudocapacitance-boosted by dQm/dV plots, GITT (Galvanostatic Intermittent Titration Technique), and pseudocapacitance contribution measurement, revealing that higher cutoff potential induces electrochemical performance changes. The results show that the activation of the silicon oxide phase in 0–3 V promotes capacity increases in long-term cycling and capacitive contribution increases in 0–3 V significantly enhance the high current density discharge ability. Those attributes of red mud-based anode material become a promising candidate for low-cost and high-energy-density Li-ion batteries. This work provides estimations of economic feasibility and environmental impact, results show that quasi-closed-loop has high economic feasibility and low CO 2 -Eq. emission of 1.525 kg CO 2 -Eq. per kg RA/C compared to 9.616 kg CO 2 -Eq. per kg natural graphite of conventional natural graphite. This work proposed a feasible, sustainable, and scalable red mud recycling approach that promotes green and sustainable development of the Aluminum industry.

Recent advances on beneficial management of lithium refinery residue in China

Waste reduction and high value utilization of jarosite-alunite residue (JAR) produced from the recovery of spent lithium-ion battery

Interfacial processing engineering of co-grinding agent for recycling of spent lithium-ion batteries

A novel approach for extracting lithium from overhaul slag by low temperature roasting – water leaching

Resource utilization strategies for spent pot lining: A review of the current state

Summary of Pretreatment of Waste Lithium-Ion Batteries and Recycling of Valuable Metal Materials: A Review

Electrochemical technologies for lithium recovery from liquid resources: A review

Quasi-closed-loop approach for facile and environmentally friendly red mud reutilization as advanced Li-ion anode material

Emerging Processes for Sustainable Li‐Ion Battery Cathode Recycling

LCA for lithium battery recycling technology-recent progress

Recyling manganese-rich electrolytic residues: a review

Lithium in a Sustainable Circular Economy: A Comprehensive Review

Immobilization enhancement of heavy metals in lightweight aggregate by component regulation of multi-source solid waste

Recent advancements in hydrometallurgical recycling technologies of spent lithium-ion battery cathode materials

Recycling of Lithium Batteries—A Review

Research progress on comprehensive utilization of fluorine-containing solid waste in the lithium battery industry

Recent progress on key materials and technical approaches for electrochemical lithium extraction processes

Recovery of cathode material of abandoned lithium-ion battery: Comparison of methods and the recent situation of utilization of Chinese factories

Sustainable and efficient stabilization/solidification of Pb, Cr, and Cd in lead-zinc tailings by using highly reactive pozzolanic solid waste

Study on efficient and synergistic leaching of valuable metals from spent lithium iron phosphate using the phosphoric acid-oxalic acid system

Preferential and efficient extraction of lithium under the combined action of reduction of herb-medicine residue and leaching of oxalic acid