Abstract:A series of metal oxide sorbents for the deep removal of H2S from hot coal gas were synthesized using a high-pressure impregnation method. Semicoke was selected as support and the solutions of one or more combination among zinc nitrate, manganese nitrate, and copper nitrate were selected as the active component precursors in the preparation process of sorbents. SEM results show that these metal oxides can be evenly dispersed onto semicoke support with nanometer particle sizes by a high-pressure impregnation method. Simultaneously, the pore structures of the sorbents are significantly improved through the hydrothermal process of high-pressure impregnation. The desulfurization activities of the Zn-Mn-Cu-based sorbents in a fixed-bed reactor under feeding gas of CO (33 vol %), H-2 (39 vol %), H2S (500 ppmv), and N-2 (balance) are much better than those of single Zn-, Mn-, and Cu-based as well as double Zn-Mn-based sorbents prepared under the same operating conditions. The Z20M4C6SC sorbent can remove H2S from 500 to 0.1 ppmv at 300-550 degrees C and hold for 56 h. The sulfur capacity is 13.84 g S/100 g sorbent at 500 degrees C, which is higher than the simple summation of three single metal oxide sorbents. On the basis of the X-ray diffraction (XRD) results, ZnO, MnO2, CuO, and ZnMnO3 served as the active components of Zn-Mn-Cu-based sorbents. ZnMnO3 played a main role in the removal of H2S from hot coal gas. The addition of CuO in the Zn Mn-based sorbent can improve the dispersion degree of active components on support and promote the formation of ZnMnO3, thereby improving the desulfurization capacity of sorbent.

Performance evaluation of Zn-Fe adsorbent for H2S adsorption during biogas purification

Performance Evaluation of Zn-Fe Adsorbent for H 2 S Adsorption During Biogas Purification

Microwave-assisted Synthesis of Zn-Fe Adsorbent Supported on Alumina: Effect of Zn to Fe Ratio on Syngas Desulfurization Performance

Review of high temperature H2S removal from syngas: Perspectives on downstream process integration

Adsorption Mechanism and Regeneration Performance of Calcined Zeolites for Hydrogen Sulfide and Its Application

Hydrogen Sulfide Adsorption by Iron Oxides and Their Polymer Composites: A Case-Study Application to Biogas Purification

Discovering the Interference of Hydrogen Sulfide on Polyethylenimine-Functionalized Porous Resin for Biogas Upgrading Via CO2 Adsorption

H2S Removal from Biogas using Steel Wool (Fe2O3) Adsorption Combined with Water Absorption: Experimental and Modelling via RSM

Review of high temperature H 2 S removal from syngas: perspectives on downstream process integration

Cu-Zn oxides nanoparticles supported on SBA-15 zeolite as a novel adsorbent for simultaneous removal of H2S and Hg0 in natural gas

Study on selective hydrogen sulfide removal over carbon dioxide by catalytic oxidative absorption method with chelated iron as the catalyst

Removal of H2S from biogas by adsorption with commercial activated carbon and granular iron oxide

Synthesis of ZnO-CuO and ZnO-Co3O4 Materials with Three-Dimensionally Ordered Macroporous Structure and Its H2S Removal Performance at Low-Temperature

Comparison of adsorbents for H2S and D4 removal for biogas conversion in a solid oxide fuel cell

Design and Performance of an Adsorption Bed with Activated Carbons for Biogas Purification

Interaction among Metal Components of Zn–Mn–Cu-Based Sorbents Prepared by High-Pressure Impregnation Method and Its Effect on the Removal of H2S from Hot Coal Gas

Performance and Optimization of Integrated Biogas Bio-desulfurization Reactor

Hydrogen Sulfide Adsorption from Natural Gas Using Silver-Modified 13X Molecular Sieve

Use of carbon-encapsulated zero-valent iron nanoparticles from waste biomass to hydrogen sulphide wet removal

Experimental Bench-Scale Study of Residual Biomass Syngas Desulfurization Using ZnO-Based Adsorbents

Effect of Bimetallic-Activated Carbon Impregnation on Adsorption–Desorption Performance for Hydrogen Sulfide (H2S) Capture