Abstract:The design of a functional electrolyte system that is compatible with the LiNi0.8Co0.15Al0.05O2 (LNCA) cathode is of great importance for advanced lithium-ion batteries (LIBs). In this work, chelated lithium salts of lithium difluoro(bisoxalato) phosphate (LiDFBOP) and lithium tetrafluoro(oxalate) phosphate (LTFOP) are synthesized by a facile and general method. Then, the complexes of LiDFBOP, LTFOP, and lithium difluorophosphate (LiDFP), all of which have a central phosphorus atom, were selected as the salt-type additives for the LiPF6-based electrolyte to improve the electrochemical performances of LNCA/Li half-batteries, respectively. The results of electrochemical tests, quantum chemistry calculations, potential-resolved in situ electrochemical impedance (PRIs-EIS) measurements, and surface analyses show that the interface property and the battery performance are closely associated with molecular structures of phosphorus-centered complex additives. It indicates that LiDFP with the P═O bond can significantly reduce the interfacial impedance of LNCA/Li half-batteries due to the increase of Li3PO4 and the decrease of Li2CO3 in the cathode electrolyte interface (CEI). While in LiDFBOP, according to the calculated vertical ionization potential (VIP), the two oxalate-chelated ligands bring about a bidirectional cross-linking reaction, which makes it preferential to be oxidized. This process is self-healing and can form a dense and stretched CEI, which is favorable to the cycle performance at the late stage. In contrast, the polymerization reaction will occur in one direction for LTFOP due to its lone oxalate ligand. Additionally, an unfavorable side reaction between LTFOP and EC has been proposed by the aid of Gibbs free energy calculation. This is a good explanation for the formation of the uneven and unstable CEI, as well as the continuous decomposition of the electrolyte in PRIs-EIS measurement. This work has an extensive applicability and practical significance not only for molecular designing of novel lithium salts, but also for the construction of a functional electrolyte system that is compatible with different electrode materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21535?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21535</a>.13C NMR (a) and 1H NMR (b) spectra of DTMSO; Raman spectra of electrolytes with and without LiDFP in STD; calculated Raman spectra of different solvation structures by the Gaussian 16 package at the B3LYP/6-31 + G(p,d); selected capacity–voltage profiles of the LNCA/Li half-cells of electrolytes with STD and electrolytes with additives; electrochemical impedance spectra of LNCA/Li cells in electrolytes with different additives; Bode–Phase plot and vertical view Bode–Phase plot from PRIs-EIS; possible mechanisms of LTFOP oxidative decomposition at the LNCA cathode; SEM images and ATR-FTIR of the LNCA cathode in different conditions; EDS and TEM images of the LNCA electrode after cycling in electrolytes of STD and electrolyte with additives; ionic conductivity of electrolyte as a function of LiDFBOP and LTFOP percentage at 25 °C; calculated Raman spectrum of different solvation structures by the Gaussian 16 package at the B3LYP/6-31 + G(p,d) and peak position adjusted by Multiwfn 3.7 software with a correction factor of 0.9636 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21535/suppl_file/am0c21535_si_001.pdf">PDF</a>)PRIs-EIS of electrolyte with LiDFP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21535/suppl_file/am0c21535_si_002.mp4">MP4</a>)PRIs-EIS of electrolyte with LiDFBOP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21535/suppl_file/am0c21535_si_003.mp4">MP4</a>)PRIs-EIS of electrolyte with LTFOP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21535/suppl_file/am0c21535_si_004.mp4">MP4</a>)This article has not yet been cited by other publications.

A new ionic liquid comprising lanthanum(iii) bulk-modified carbon paste electrode: preparation, electrochemistry and electrocatalysis

An Improved Method of Preparing Iridium Oxide Electrode Based on Carbonate-Melt Oxidation Mechanism

Benzimidazoles ionic liquids and lead(II)coordination polymer: Synthesis, crystal structure and electrochemical properties

An Ionic Liquid-Type Carbon Paste Electrode and Its Polyoxometalate-Modified Properties

Excellent Stability of a Lithium‐Ion‐Conducting Solid Electrolyte Upon Reversible Li+/H+ Exchange in Aqueous Solutions

Preparation and Properties of Three Plasticiser-Free Novel Di-benzo-18-Crown-6 Aldimine-Derived Lead(II) Ion-Selective Electrodes

Preparation of Lanthanide Ion Surface Imprinted Polymers Based on Mesoporous Silica and Their Adsorption Properties

In Situ Construction of Uniform and Robust Cathode–Electrolyte Interphase for Li‐Rich Layered Oxides

Reinforcing The Electrode/Electrolyte Interphases of Lithium Metal Batteries Employing Locally Concentrated Ionic Liquid Electrolytes

Triazine crosslinked polyionic liquid: An electrolyte-stable, lithiophilic and electrostatic shielding layer for uniform lithium plating/stripping

Analyzing the Mechanism of Functional Groups in Phosphate Additives on the Interface of LiNi 0.8 Co 0.15 Al 0.05 O 2 Cathode Materials

<i>In situ</i> coating of a lithiophilic interphase on a biporous Cu scaffold with vertical microchannels for dendrite-free Li metal batteries

Li3InCl6-coated LiCoO2 for high-performance all solid-state batteries

Voltammetric sensing performances of a carbon ionic liquid electrode modified with black phosphorene and hemin

Metal anion-cation coordination ionic liquid for polycarbonate synthesis from spent lithium battery electrolyte

Renewable New Copper Complex Bulk‐Modified Carbon Paste Electrode: Preparation, Electrochemistry, and Electrocatalysis

Ionic liquid additive stabilized cathode/electrolyte interface in LiCoO2 based solid-state lithium metal batteries

Introducing NO 3 – into Carbonate‐Based Electrolytes via Covalent Organic Framework to Incubate Stable Interface for Li‐Metal Batteries

Composite Solid Electrolyte with Continuous and Fast Organic-Inorganic Ion Transport Highways Created by 3D Crimped Nanofibers@functional Ceramic Nanowires

Ce(NO3)3 as an electrolyte additive to regulate uniform lithium deposition for stable all-solid-state batteries

Investigation of a Fluorine-Free Phosphonium-Based Ionic Liquid Electrolyte and Its Compatibility with Lithium Metal.