Abstract:Abstract Uncontrollable dendrite growth resulting from the non-uniform lithium ion (Li + ) flux and volume expansion in lithium metal (Li) negative electrode leads to rapid performance degradation and serious safety problems of lithium metal batteries. Although N-containing functional groups in carbon materials are reported to be effective to homogenize the Li + flux, the effective interaction distance between lithium ions and N-containing groups should be relatively small (down to nanometer scale) according to the Debye length law. Thus, it is necessary to carefully design the microstructure of N-containing carbon materials to make the most of their roles in regulating the Li + flux. In this work, porous carbon nitride microspheres (PCNMs) with abundant nanopores have been synthesized and utilized to fabricate a uniform lithiophilic coating layer having hybrid pores of both the nano- and micrometer scales on the Cu/Li foil. Physically, the three-dimensional (3D) porous framework is favorable for absorbing volume changes and guiding Li growth. Chemically, this coating layer can render a suitable interaction distance to effectively homogenize the Li + flux and contribute to establishing a robust and stable solid electrolyte interphase (SEI) layer with Li-F, Li-N, and Li-O-rich contents based on the Debye length law. Such a physical-chemical synergic regulation strategy using PCNMs can lead to dendrite-free Li plating, resulting in a low nucleation overpotential and stable Li plating/stripping cycling performance in both the Li‖Cu and the Li‖Li symmetric cells. Meanwhile, a full cell using the PCNM coated Li foil negative electrode and a LiFePO 4 positive electrode has delivered a high capacity retention of ∼ 80% after more than 200 cycles at 1 C and achieved a remarkable rate capability. The pouch cell fabricated by pairing the PCNM coated Li foil negative electrode with a NCM 811 positive electrode has retained ∼ 73% of the initial capacity after 150 cycles at 0.2 C.

Triazine crosslinked polyionic liquid: An electrolyte-stable, lithiophilic and electrostatic shielding layer for uniform lithium plating/stripping

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

A Fluorinated, Ion-Conducting and Adaptive Supramolecular Polymer Protective Layer for Stabilizing Lithium Metal Anodes

Phase-Separation-Induced Porous Lithiophilic Polymer Coating for High-Efficiency Lithium Metal Batteries

A scalable bio-inspired polydopamine-Cu ion interfacial layer for high-performance lithium metal anode

Stable Lithium Plating and Stripping Enabled by a LiPON Nanolayer on PP Separator

Regulating Li‐ion Flux Through a Dense Yet Highly Ionic Conductive Interlayer for Stable Li Deposition

Bipolar Polymeric Protective Layer for Dendrite‐Free and Corrosion‐Resistant Lithium Metal Anode in Ethylene Carbonate Electrolyte

Constructing a universal artificial polymeric ionic liquid interfacial film for graphite anode and High-Voltage cathode

PVDF-HFP/LiF Composite Interfacial Film to Enhance the Stability of Li-Metal Anodes

Polylatic Acid Nanofiber-Guided Uniform Lithium Deposition for Stable Lithium Metal Anodes

Stabilization of the Li Metal Anode Through Constructing a LiZn Alloy/polymer Hybrid Protective Layer Towards Uniform Li Deposition

Designing F/P Hybrid Polymer As Ultrastable Cationic Shielding Interphase for High-Performance Lithium Metal Batteries

Ultrathin LiF-rich solid electrolyte interphase for stable long-life cycling stabilization of lithium metal anodes

Highly stable and robust bi-electrodes interfacial protective films for practical lithium metal batteries

Nano-channel-based physical and chemical synergic regulation for dendrite-free lithium plating

Boosting stable lithium deposition via Li3N-Enriched inorganic SEI induced by a polycationic polymer layer

Cationic Interfacial Layer toward a LiF-Enriched Interphase for Stable Li Metal Batteries

A Homogeneous and Mechanically Stable Artificial Diffusion Layer Using Rigid-Flexible Hybrid Polymer for High-Performance Lithium Metal Batteries

A polythiourea protective layer for stable lithium metal anodes