MEDIATOR METABOLISM OF MYOCARDIUM IN COMPENSATORY HYPERFUNCTION AND HYPERTROPHY OF HEART.

F. Meerson,B. N. Manukhin,M. G. Pshenichnikova,L. S. Rozanova

Abstract:

What problem does this paper attempt to address?

Precise Printing of Microfiber Scaffold with Gelatin Methacryloyl (gelma)/polyethylene Oxide (PEO) Bioink

Haibing Li,Ruijian Zhou,Qiang Shu,Mingjun Xie,Yong He

DOI: https://doi.org/10.3390/bioengineering10020130

IF: 5.046

2023-01-01

Bioengineering

Abstract:Gelatin methacryloyl scaffolds with microscale fiber structures own great significance because they can effectively mimic the extracellular matrix environment. Compared with extruding bioprinting, electrospinning technology is more suitable for establishing accurate hydrogel microfibers. However, electrospinning accurate gelatin methacryloyl microfiber remains a big challenge restricted by its bad spinnability. In this paper, polyethylene oxide, which owns promising spinnability, is added into gelatin methacryloyl hydrogel precursor to improve the spinnability of gelatin methacryloyl bioink. A three-dimensional motion platform for electrospinning is designed and built and the spinning process of microfibers under far-electric-field and near-electric-field conditions is systematically studied, respectively. As a result, scaffolds consisted of unordered and ordered microfibers are successfully fabricated under far-electric-field and near-electric field, respectively. In vitro culture experiments of human umbilical vein endothelial cells are carried out using the prepared gelatin methacryloyl microfiber scaffolds. The results show that the cells can easily attach to the microfibers and grow well. Moreover, the gelatin methacryloyl/ polyethylene oxide microfiber scaffold was directly spun on the polycaprolactone mesh scaffold printed by fused modeling printing method. The results showed that the macroscopic ordered and microscopic disordered microfiber scaffold could be successfully established, which could lead to directed cell growth. We believe that this method can effectively solve the problem of hydrogel spinnability and be a powerful tool for various biomedical engineering methods in the future.
Silk fibroin/sodium alginate composite nano-fibrous scaffold prepared through thermally induced phase-separation (TIPS) method for biomedical applications

haiping zhang,xiaotian liu,mingying yang,liangjun zhu

DOI: https://doi.org/10.1016/j.msec.2015.05.052

2015-01-01

Abstract:To mimic the natural fibrous structure of the tissue extracellular matrix, a nano-fibrous silk fibroin (SF)/sodium alginate (SA) composite scaffold was fabricated by a thermally-induced phase-separation method. The effects of SF/SA ratio on the structure and the porosity of the composite scaffolds were examined. Scanning electron microscopy and porosity results showed that the 5SF/1SA and 3SF/1SA scaffolds possessed an excellent nano-fibrous structure and a porosity of more than 90%. Fourier transform infrared, X-ray diffraction, and differential scanning calorimetry results indicated the physical interaction between SF and SA molecules and their good compatibility in the 5SF/1SA and 3SF/1SA scaffolds, whereas they showed less compatibility in the 1SF/1SA scaffold. Cell culture results showed that MG-63 cells can attach and grow well on the surface of the SF/SA scaffolds. The nano-fibrous SF/SA scaffold can be potentially used in tissue engineering.
Fabrication of Three-Dimensional Nanofibrous Gelatin Scaffolds Using One-Step Crosslink Technique

Fangjun Teng,Huifen Ding,Yiqing Huang,Jiawei Wang

DOI: https://doi.org/10.1080/09205063.2018.1515299

2018-01-01

Abstract:Electrospun nanofibers have been considered to be an ideal scaffold for tissue engineering, because of the extracellular-matrix-like structure and the well-controlled fabrication. Here, a new method was used to fabricate electrospun three-dimensional macroporous nanofibrous gelatin scaffolds in ethanol bath by one-step crosslink with glutaraldehyde. The mean diameter of the one-step crosslinked fibers was significantly smaller than that of the traditional two-step crosslinked fibers (p<0.05), and scaffolds prepared by one-step crosslink were fluffy and porous. No significant difference was found in the degradation rates for both fibers within 14 days. After immersion in PBS for 14 days, numerous two-step crosslinked fibers merged together. By contrast, the morphology and macroporous structure of one-step crosslinked fibers showed no evident change and were generally maintained. Approximate crosslinking degrees of the two-step and one-step crosslinked gelatin fibers were 40% and 54%, respectively (p<0.05). Results from fluorescence microscopy and hematoxylin-eosin staining showed that MC3T3-E1 subclone four cells were distributed more evenly and diversely in the one-step crosslinked fiber scaffolds. The one-step crosslinked fibers enhanced the proliferation and differentiation potential of MC3T3-E1 cells. Furthermore, one-step crosslinked fibers were beneficial in repairing defects in the skulls of rats. Thus, one-step crosslink by glutaraldehyde in ethanol bath is a cost-effective and simple method to fabricate three-dimensional macroporous nanofiberous scaffolds. This technique retains the morphology and structure of the gelatin fibers, and enhances the biological performance of scaffolds in vitro and in vivo.
Highly Permeable Gelatin/Poly(lactic Acid) Fibrous Scaffolds with a Three-Dimensional Spatial Structure for Efficient Cell Infiltration, Mineralization and Bone Regeneration

Zongliang Wang,Yufeng Tang,Maihemuti Yakufu,Linlong Li,Gang Li,Jianguo Liu,Peibiao Zhang

DOI: https://doi.org/10.1021/acsabm.0c00815

2020-01-01

ACS Applied Bio Materials

Abstract:Three-dimensional (3D) fibrous scaffolds allowing sufficient cell infiltration are urgently needed for bone tissue engineering. In this study, a highly permeable 3D interconnected scaffold was fabricated by surface bonding of cotton-like nonwoven fibers with micro- and nanoscale architecture using gaseous chloroform. The results of physiochemical characterization indicated that bonding for 90 min with a fiber density of 0.15 g/cm(3) could facilitate satisfactory porosity, supportive mechanical properties, and a 3D spatial microstructure for cell ingrowth. Coating with gelatin on the fibers induced highly efficient in vitro mineralization and in vivo bone formation as indicated by mineral deposition and repair of rabbit radius bone defect. The findings from this work demonstrated that these biofunctionalized fibrous scaffolds could bionically represent topographic nanofeatures and biological composition for cell binding affinities similar to those of the natural extracellular matrix (ECM). It can be concluded that the facile fabrication and modification strategy of 3D fibrous scaffolds exhibit promising prospect to fulfill the progressive needs in bone tissue engineering.
Macroporous and nanofibrous poly(lactide-co-glycolide)(50/50) scaffolds via phase separation combined with particle-leaching

Jifu Mao,Shun Duan,Anna Song,Qing Cai,Xuliang Deng,Xiaoping Yang

DOI: https://doi.org/10.1016/j.msec.2012.04.018

2012-01-01

Abstract:Poly(lactide-co-glycolide) (PLGA) copolymers are the most prevalent materials for tissue engineering applications. To mimic the real microenvironment of extracellular matrix (ECM) for cell growth, nanofibrous PLGA scaffolds are preferred. PLGA5050 (in which the molar ratio of lactidyl to glycolidyl units is 50:50), which is an utterly amorphous polymer, was first reported to be made into nanofibrous networks (fiber diameter around 500nm) using phase separation from PLGA5050/THF solutions in this study. The concentration of polymeric solution had significant effects on fiber diameter and unit length. Nonsolvent (e.g. H2O) was unnecessary to form the PLGA5050 gel, which was critical to nanofibrosis, as if the environmental temperature for gelation occurrence was low enough (−70°C). The physical crosslinks to stabilize the PLGA5050/THF gel were believed to be GA segments along the backbone owing to their inferior solubility in THF. The addition of H2O would cause adverse effects of liquid–liquid phase separation and nanofibrosis failure owing to the hydrophilicity of glycolidyl units. Associating with the phase separation method, particle-leaching technique was applied to fabricate three-dimensional scaffolds with macroporous and nanofibrous structures. To ensure the occurrence of nanofibrosis on macropore walls, the temperature of salt particles should be best lowed to −70°C beforehand. Accordingly, scaffolds prepared under varied parameters exhibited different nanofiber and pore morphologies, which affected the pore size, porosity, specific surface area, water contact angle and protein adsorption ability etc. The preliminary cell (MC3T3-E1) culture confirmed the cell ingrowth into the macroporous and nanofibrous PLGA5050 scaffolds in comparison with the solely nanofibrous matrixes. This kind of bi-scaled three dimensional matrixes can be superior candidate scaffolds for tissue engineering applications.
Interpenetrating Polymer Network Hydrogels Composed of Chitosan and Photocrosslinkable Gelatin with Enhanced Mechanical Properties for Tissue Engineering

Hairui Suo,Deming Zhang,Jun Yin,Jin Qian,Zi Liang Wu,Jianzhong Fu

DOI: https://doi.org/10.1016/j.msec.2018.07.016

2018-01-01

Materials Science and Engineering C

Abstract:Gelatin and chitosan (CS) are widely used natural biomaterials for tissue engineering scaffolds, but the poor mechanical properties of pure gelatin or CS hydrogels become a big obstacle that limits their use as scaffolds, especially in load-bearing tissues. This study provided a novel mechanism of forming interpenetrating network (IPN) of gelatin methacryloyl (GelMA) and CS hydrogels by covalent bonds and hydrophobic interactions through photocrosslinking and basification, respectively. By characterization of the compressive and tensile moduli, ultimate tensile stress and strain, it was found that semi-IPN and IPN structure can greatly enhance the mechanical properties of GelMA-CS hydrogels compared to the single network CS or GelMA. Moreover, the increase of either GelMA or CS concentration can strengthen the hydrogel network. Then, the swelling, enzymatic degradation, and morphology of GelMA-CS hydrogels were also systematically investigated. The excellent biocompatibility of GelMA-CS hydrogels was demonstrated by large spreading area of bone mesenchymal stem cells on hydrogel surfaces when CS concentration was <2% (w/v). According to this study, the multiple requirements of properties can be fulfilled by carefully selecting the GelMA and CS compositions for IPN hydrogels.
3D Printing of Complex GelMA-based Scaffolds with Nanoclay

Qing Gao,Xuefeng Niu,Lei Shao,Luyu Zhou,Zhiwei Lin,Anyu Sun,Jianzhong Fu,Zichen Chen,Jun Hu,Yande Liu,Yong He

DOI: https://doi.org/10.1088/1758-5090/ab0cf6

2019-01-01

Biofabrication

Abstract:Photo-crosslinkable gelatin methacrylate (GelMA) has become an attractive ink in 3D printing due to its excellent biological performance. However, limited by low viscosity and long cross-linking time, it is still a challenge to directly print GelMA by extrusion-based 3D printing. Here, to balance the printability and biocompatibility, biomaterial ink composed of GelMA and nanoclay was specially designed. Using this ink, complex scaffolds with high shape fidelity can be easily printed based on the thixotropic property of nanoclay. In this study, we tried to answer some basic printing-required questions of this ink, including the printability window, general properties (porosity, mechanical strength, et al), and biocompatibility. We found that the GelMA/Nanoclay ink enabled printing complex 3D scaffolds, such as a bionic ear and a branched vessel. Furthermore, the addition of nanoclay improved the porosity, increased the mechanical strength, reduced the degradation ratio, and maintained a good biocompatibility of the printed scaffolds. Therefore, this method offers an easy way to print complex scaffolds with good shape fidelity and biological performance, and it might open up new potential applications for the customized therapy of tissue defects.
Immobilization of Gelatin on Fibers for Tissue Engineering Applications: A Comparative Study of Three Aliphatic Polyesters

Oliwia Jeznach,Dorota Kołbuk,Tobias Reich,Paweł Sajkiewicz

DOI: https://doi.org/10.3390/polym14194154

IF: 5

2022-10-05

Polymers

Abstract:Immobilization of cell adhesive proteins on the scaffold surface has become a widely reported method that can improve the interaction between scaffold and cells. In this study, three nanofibrous scaffolds obtained by electrospinning of poly(caprolactone) (PCL), poly(L-lactide-co-caprolactone) (PLCL) 70:30, or poly(L-lactide) (PLLA) were subjected to chemical immobilization of gelatin based on aminolysis and glutaraldehyde cross-linking, as well as physisorption of gelatin. Two sets of aminolysis conditions were applied to evaluate the impact of amine group content. Based on the results of the colorimetric bicinchoninic acid (BCA) assay, it was shown that the concentration of gelatin on the surface is higher for the chemical modification and increases with the concentration of free NH2 groups. XPS (X-ray photoelectron spectroscopy) analysis confirmed this outcome. On the basis of XPS results, the thickness of the gelatin layer was estimated to be less than 10 nm. Initially, hydrophobic scaffolds are completely wettable after coating with gelatin, and the time of waterdrop absorption was correlated with the surface concentration of gelatin. In the case of all physically and mildly chemically modified samples, the decrease in stress and strain at break was relatively low, contrary to strongly aminolyzed PLCL and PLLA samples. Incubation testing performed on the PCL samples showed that a chemically immobilized gelatin layer is more stable than a physisorbed one; however, even after 90 days, more than 60% of the initial gelatin concentration was still present on the surface of physically modified samples. Mouse fibroblast L929 cell culture on modified samples indicates a positive effect of both physical and chemical modification on cell morphology. In the case of PCL and PLCL, the best morphology, characterized by stretched filopodia, was observed after stronger chemical modification, while for PLLA, there was no significant difference between modified samples. Results of metabolic activity indicate the better effect of chemical immobilization than of physisorption of gelatin.

polymer science
Crosslinked Porous Three-Dimensional Cellulose Nanofibers-Gelatine Biocomposite Scaffolds for Tissue Regeneration.

Ali Mirtaghavi,Andy Baldwin,Nader Tanideh,Moein Zarei,Rajendran Muthuraj,Yuan Cao,Gang Zhao,Junfeng Geng,Hao Jin,Jikui Luo

DOI: https://doi.org/10.1016/j.ijbiomac.2020.08.066

IF: 8.2

2020-01-01

International Journal of Biological Macromolecules

Abstract:Gelatine is a biocompatible and natural polymer with chemical properties similar to the extracellular matrix. However, it has poor mechanical properties and sensitive to enzymatic biodegradation that limits its application in 3D scaffold fabrication. Cellulose nanofibrous (CNF) offers biocompatibility, high surface area and excellent mechanical properties with slow in-vivo degradation. To fine tune their properties, CNF, and gelatine (CNF-GEL) were blended to form biocomposite aerogels. Epichlorohydrin (EPH) was incorporated into CNF-GEL as a chemical crosslinker to investigate its effect on the physiochemical, mechanical, and biological properties of the biocomposite aerogels both in-vitro and in-vivo. Regardless of the composition of the prepared aerogels, they possessed porosity of >90% with the pore size of 7-135 mu m, which was confirmed in the morphological analysis. The presence of EPH improved the chemical interaction between CNF and gelatine, hence enhanced the compressive strength compared to uncrosslinked samples. The formulation of crosslinked CNF-GEL 90:10 offered the highest compressive strength of 61.35 kPa. The in-vitro and in-vivo studies showed adequate cytocompatibility, cell viability and cell attachment in the optimal crosslinked formulation with tuned enzymatic degradation. Antimicrobial property was also achieved in the optimal scaffold by incorporating curcumin as an antimicrobial agent. (C) 2020 Elsevier B.V. All rights reserved.
Fabrication of Porous Scaffolds with Protein Nanogels

Qi Zhu,Ming Yan,Lin He,XinYuan Zhu,YunFeng Lu,DeYue Yan

DOI: https://doi.org/10.1007/s11426-011-4276-0

2011-01-01

Science China Chemistry

Abstract:A novel type of porous scaffold was fabricated from single protein nanogels. The nanogels with single protein as core and crosslinked polymer network as shell were prepared through a two-step procedure including surface acryloylation and in situ radical polymerization. The formation of single protein nanogels was verified by matrix assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometer, transmission electron microscopy (TEM) and dynamic light scattering (DLS) analyses. Subsequently, the porous scaffolds were fabricated through a solvent evaporating process of aqueous nanogel solutions. The porous scaffolds were characterized by Fourier transform infrared (FTIR), scanning electronic microscopy (SEM), atomic force microscopy (AFM), and fluorescence microscopy. Interestingly, the obtained porous nanogel scaffolds presented multi-level porous morphologies with macro and nano scale pores, providing better spaces and microenvironments than normal macro porous scaffolds. Cell proliferation assay of nanogels showed low cytotoxicity. Considering that both the protein species and polymer constitutes can be pre-designed and adjusted, these multi-level porous nanogel scaffolds are promising candidates for tissue culture applications.
Quantitative estimation of the pathways followed in the conversion to glycogen of glucose administered to the fasted rat.

R. F. Scofield,K. Kosugi,W. Schumann,K. Kumaran,B. Landau

DOI: https://doi.org/10.1016/s0021-9258(17)39419-x

IF: 5.485

1985-07-25

Journal of Biological Chemistry

Abstract:
Biomimetic Engineering of Nanofibrous Gelatin Scaffolds with Noncollagenous Proteins for Enhanced Bone Regeneration

Yao Sun,Yong Jiang,Qilin Liu,Tian Gao,Jian Q. Feng,Paul Dechow,Rena N. D'Souza,Chunlin Qin,Xiaohua Liu

DOI: https://doi.org/10.1089/ten.tea.2012.0567

IF: 4.08

2013-01-01

Tissue Engineering Part A

Abstract:Biomimetic approaches are widely used in scaffolding designs to enhance tissue regeneration. In this study, we integrated noncollagenous proteins (NCPs) from bone extracellular matrix (ECM) with three-dimensional nanofibrous gelatin (NF-Gelatin) scaffolds to form an artificial matrix (NF-Gelatin-NCPs) mimicking both the nano-structured architecture and chemical composition of natural bone ECM. Through a chemical coupling process, the NCPs were evenly distributed over all the surfaces (inner and outer) of the NF-gelatin-NCPs. The in vitro study showed that the number of osteoblasts (MC3T3-E1) on the NF-Gelatin-NCPs was significantly higher than that on the NF-Gelatin after being cultured for 14 days. Both the alkaline phosphatase (ALP) activity and the expression of osteogenic genes (OPN, BSP, DMP1, CON, and Runx2) were significantly higher in the NF-Gelatin-NCPs than in the NF-Gelatin at 3 weeks. Von Kossa staining, backscattered scanning electron microscopy, and microcomputed tomography all revealed a higher amount of mineral deposition in the NF-Gelatin-NCPs than in the NF-Gelatin after in vitro culturing for 3 weeks. The in vivo calvarial defect study indicated that the NF-Gelatin-NCPs recruited more host cells to the defect and regenerated a higher amount of bone than the controls after implantation for 6 weeks. Immunohistochemical staining also showed high-level mineralization of the bone matrix in the NF-Gelatin-NCPs. Taken together, both the in vitro and in vivo results confirmed that the incorporation of NCPs onto the surfaces of the NF-Gelatin scaffold significantly enhanced osteogenesis and mineralization. Biomimetic engineering of the surfaces of the NF-Gelatin scaffold with NCPs, therefore, is a promising strategy to enhance bone regeneration.
3D Printed Gelatin Scaffold with Improved Shape Fidelity and Cytocompatibility by Using Antheraea pernyi Silk Fibroin Nanofibers

Shengzhi Zou,Suna Fan,Ana L. Oliveira,Xiang Yao,Yaopeng Zhang,Huili Shao

DOI: https://doi.org/10.1007/s42765-022-00135-w

IF: 12.958

2022-03-01

Advanced Fiber Materials

Abstract:Gelatin (G) is a commonly used natural biomaterial owing to its good biocompatibility and easy availability. However, using pure gelatin as a bioink can barely achieve an ideal shape fidelity in 3D printing. In this study, Antheraea pernyi silk fibroin nanofibers (ASFNFs) with arginine-glycine-aspartic acid (RGD) peptide and partial natural silk structure are extracted and combined with pure gelatin bioink to simultaneously improve the shape fidelity and cytocompatibility of corresponding 3D printed scaffold. Results show that the optimum printing temperature is 30 °C for these bioinks. The printed filaments using 16G/4ASFNFs bioink (16wt% gelatin and 4wt% ASFNFs) demonstrate better morphology and larger pore size than those printed by pure gelatin bioink (20G, 20wt% gelatin), thus successfully improve the shape fidelity and porosity of the 3D printed scaffold. The 16G/4ASFNFs scaffold also demonstrate higher swelling ratio and faster degradation rate than the pure gelatin scaffold. Moreover, the cell viability and proliferation ability of Schwann cells cultured on the 16G/4ASFNFs scaffold are significantly superior than those cultured on the pure 20G scaffold. The ASFNFs enhanced 16G/4ASFNFs scaffold reported here are expected to be a candidate with excellent potential for biomedical applications.Graphical abstract

materials science, multidisciplinary, textiles
Fabrication of gelatin nanofibrous scaffolds using ethanol/phosphate buffer saline as a benign solvent.

Zhengbao Zha,Weibing Teng,Valerie Markle,Zhifei Dai,Xiaoyi Wu

DOI: https://doi.org/10.1002/bip.22120

2012-01-01

Biopolymers

Abstract:Electrospinning of natural polymer nanofibers useful for biomedical applications often requires the use of cytotoxic organic solvents. In this study, gelatin nanofibers are electrospun from phosphate buffer saline/ethanol binary mixtures as a benign solvent at ambient temperature. The influences of ionic strength, ethanol concentration, and gelatin concentration on the electrospinnability of gelatin solutions and the fiber microarchitectures are analyzed. The electrospun scaffolds retain their morphologies during vapor-phase crosslinking with glutaraldehyde in ethanol and the subsequent removal of salts contained in the nanofibers via water rinsing. When fully hydrated, the mechanically preconditioned scaffolds display a Young's modulus of 25.5 +/- 5.3 kPa, tensile strength of 55.5 +/- 13.9 kPa, deformability of 160 +/- 15%, and resilience of 89.9 +/- 1.8%. When cultured on the gelatin scaffolds, 3T3 fibroblasts displayed spindle-like morphology, similar to the cell's normal morphology in a 3D extracellular matrix. (c) 2012 Wiley Periodicals, Inc. Biopolymers 97:10261036, 2012.
Inverted-Colloidal-Crystal Hydrogel Matrices As Three-Dimensional Cell Scaffolds

YJ Zhang,SP Wang,M Eghtedari,M Motamedi,NA Kotov

DOI: https://doi.org/10.1002/adfm.200400325

IF: 19

2005-01-01

Advanced Functional Materials

Abstract:Successful engineering of functional tissues requires the development of three-dimensional (3D) scaffolds that can provide an optimum microenvironment for tissue growth and regeneration. A new class of 3D scaffolds with a high degree of organization and unique topography is fabricated from polyacrylamide hydrogel. The hydrogel matrix is molded by inverted colloidal crystals made from 1041 mu m poly(methyl methacrylate) spheres. The topography of the scaffold can be described as hexagonally packed 97 mu m spherical cavities interconnected by a network of channels. The scale of the long-range ordering of the cavities exceeds several millimeters. In contrast to analogous material in the bulk, hydrogel shaped as an inverted opal exhibits much higher swelling ratios; its swelling kinetics is an order of magnitude faster as well. The engineered scaffold possesses desirable mechanical and optical properties that can facilitate tissue regeneration while allowing for continuous high-resolution optical monitoring of cell proliferation and cell-cell interaction within the scaffold. The scaffold biocompatibility as well as cellular growth and infiltration within the scaffold were observed for two distinct human cell lines which were seeded on the scaffold and were tracked microscopically up to a depth of 250 mu m within the scaffold for a duration of up to five weeks. Ease of production, a unique 3D structure, biocompatibility, and optical transparency make this new type of hydrogel scaffold suitable for most challenging tasks in tissue engineering.
Function and clinical potential of microRNAs in hepatocellular carcinoma.

Lijuan Wang,Yongfang Yue,Xian Wang,Hongchuan Jin

DOI: https://doi.org/10.3892/OL.2015.3759

2015-12-01

Oncology Letters

Abstract:MicroRNAs (miRNAs) are small non-coding RNAs involved in the initiation and progression of several types of human cancer, including hepatocellular carcinoma (HCC), which is one of the most common types of cancer and the third leading cause of cancer-related mortality worldwide. Mounting evidence has demonstrated that miRNAs play a vital role in HCC, hepatitis, alcoholic liver disease, liver cell development and the metabolic functions of the liver. The aim of the present review was to summarize the most recent findings on the functions of miRNAs in the liver and discuss their potential roles in the diagnosis, prognosis and treatment of HCC.
Bacterial Cellulose Nanofibers Promote Stress and Fidelity of 3D-Printed Silk Based Hydrogel Scaffold with Hierarchical Pores

Li Huang,Xiaoyu Du,Suna Fan,Gesheng Yang,Huili Shao,Dejian Li,Chengbo Cao,Yufang Zhu,Meifang Zhu,Yaopeng Zhang

DOI: https://doi.org/10.1016/j.carbpol.2019.05.080

IF: 10.723

2019-01-01

Carbohydrate Polymers

Abstract:One of the latest trends in the regenerative medicine is the development of 3D-printing hydrogel scaffolds with biomimetic structures for tissue regeneration and organ reconstruction. However, it has been practically difficult to achieve a highly biomimetic hydrogel scaffolds with proper mechanical properties matching the natural tissue. Here, bacterial cellulose nanofibers (BCNFs) were applied to improve the structural resolution and enhance mechanical properties of silk fibroin (SF)/gelatin composite hydrogel scaffolds. The SF-based hydrogel scaffolds with hierarchical pores were fabricated via 3D-printing followed by lyophilization. Results showed that the tensile strength of printed sample increased significantly with the addition of BCNFs in the bioink. Large pores and micropores in the scaffolds were achieved by designing printing pattern and lyophilization after extrusion. The pores ranging from 10 to 20 mu m inside the printed filaments served as host for cellular infiltration, while the pores with a diameter from 300 to 600 mu m circled by printed filaments ensured sufficient nutrient supply. These 3D-printed composite scaffolds with remarkable mechanical properties and hierarchical pore structures are promising for further tissue engineering applications.
Purification of a putative Na+ /D‐glucose cotransporter from pig kidney brush border membranes on a phlorizin affinity column

Tomas Kitlar,A. Morrison,R. Kinne,J. Deutscher

DOI: https://doi.org/10.1016/0014-5793(88)81315-2

1988-07-04

FEBS Letters

Abstract:
Fabrication, Characterization, and Biocompatibility Study of Gelatin-Blended Fibroin Scaffold

Kamolchanok Naksuwan,Sukanya Chaipayang,Pollawat Charoeythornkhajhornchai,Santi Phosri

DOI: https://doi.org/10.55164/ajstr.v26i2.248655

2023-03-31

ASEAN Journal of Scientific and Technological Reports

Abstract:This research investigates the biocompatibility of gelatin-blended fibroin scaffold fabricated by freeze-dry process. The morphology showed interconnected spongy spheres and polygons shapes with a pore size of 14.144 ± 11.31 and 19.4822 ± 18.71 micrometers, respectively. The formula ratio of fibroin: gelatin of 8:2 contained more random coil, while the formula ratio of fibroin: gelatin of 7:3 exhibited more β-sheet structure. The result revealed that gelatin influences fibroin conformational transition from random coil to beta, which might result from better hydrophobic characteristics. The surface of the formula ratio of fibroin: gelatin at 8:2 and 7:3 was 125.88 ± 9.85 and 130.07 ± 3.72 degrees, indicating the formula ratio of fibroin: gelatin at 7:3 had more hydrophobicity than the formula ratio of fibroin: gelatin at 8:2. The biocompatibility of scaffolds was determined for both formulas of human keratinocyte (HaCaT) and African green monkey kidney (Vero) cell lines by MTT assay. The formula ratio of fibroin: gelatin at 8:2 with various concentrations of 62.50, 125, 250, 500, and 1,000 μg/mL had cell viability percentages of 96.31, 101.74, 97.81, 104.15, and 103.22%, respectively. The formula ratio of fibroin: gelatin at 7:3 with various concentrations of 62.50, 125, 250, 500, and 1,000 μg/mL had cell viability percentages of 106.38, 104.28, 108.54, 97.42, and 97.65%, respectively. The growth of cell lines showed better performance with the hydrophilic characteristics of the scaffold, and it did not make it toxic to the HaCaT and Vero cell lines. These results demonstrated the possibility of gelatin-blended scaffold as a supporting material for skin tissue engineering, especially for wound healing.
Nanofibrous Scaffold Prepared by Electrospinning of Poly(vinyl Alcohol)/gelatin Aqueous Solutions

Changchun Yang,Xiaomian Wu,Yinghui Zhao,Ling Xu,Shicheng Wei

DOI: https://doi.org/10.1002/app.33934

IF: 3

2011-01-01

Journal of Applied Polymer Science

Abstract:A series of nanofibrous scaffolds were prepared by electrospinning of poly(vinyl alcohol) (PVA)/gelatin aqueous solution. PVA and gelatin was dissolved in pure water and blended in full range, then being electrospun to prepared nanofibers, followed by being crosslinked with glutaraldehyde vapor and heat treatment to form nanofibrous scaffold. Field emission scanning electron microscope (FESEM) images of the nanofibers manifested that the fiber average diameters decreased from 290 to 90 nm with the increasing of gelatin. I n vitro degradation rates of the nanofibers were also correlated with the composition and physical properties of electrospinning solutions. Cytocompatibility of the scaffolds was evaluated by cells morphology and MTT assay. The FESEM images revealed that NIH 3T3 fibroblasts spread and elongated actively on the scaffolds with spindle‐like and star‐type shape. The results of cell attachment and proliferation on the nanofibrous scaffolds suggested that the cytotoxicity of all samples are grade 1 or grade 0, indicating that the material had sound biosafety as biomaterials. Compared with pure PVA and gelatin scaffolds, the hybrid ones possess improved biocompatibility and controllability. These results indicate that the PVA/gelatin nanofibrous have potential as skin scaffolds or wound dressing. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011

MEDIATOR METABOLISM OF MYOCARDIUM IN COMPENSATORY HYPERFUNCTION AND HYPERTROPHY OF HEART.

Precise Printing of Microfiber Scaffold with Gelatin Methacryloyl (gelma)/polyethylene Oxide (PEO) Bioink

Silk fibroin/sodium alginate composite nano-fibrous scaffold prepared through thermally induced phase-separation (TIPS) method for biomedical applications

Fabrication of Three-Dimensional Nanofibrous Gelatin Scaffolds Using One-Step Crosslink Technique

Highly Permeable Gelatin/Poly(lactic Acid) Fibrous Scaffolds with a Three-Dimensional Spatial Structure for Efficient Cell Infiltration, Mineralization and Bone Regeneration

Macroporous and nanofibrous poly(lactide-co-glycolide)(50/50) scaffolds via phase separation combined with particle-leaching

Interpenetrating Polymer Network Hydrogels Composed of Chitosan and Photocrosslinkable Gelatin with Enhanced Mechanical Properties for Tissue Engineering

3D Printing of Complex GelMA-based Scaffolds with Nanoclay

Immobilization of Gelatin on Fibers for Tissue Engineering Applications: A Comparative Study of Three Aliphatic Polyesters

Crosslinked Porous Three-Dimensional Cellulose Nanofibers-Gelatine Biocomposite Scaffolds for Tissue Regeneration.

Fabrication of Porous Scaffolds with Protein Nanogels

Quantitative estimation of the pathways followed in the conversion to glycogen of glucose administered to the fasted rat.

Biomimetic Engineering of Nanofibrous Gelatin Scaffolds with Noncollagenous Proteins for Enhanced Bone Regeneration

3D Printed Gelatin Scaffold with Improved Shape Fidelity and Cytocompatibility by Using Antheraea pernyi Silk Fibroin Nanofibers

Fabrication of gelatin nanofibrous scaffolds using ethanol/phosphate buffer saline as a benign solvent.

Inverted-Colloidal-Crystal Hydrogel Matrices As Three-Dimensional Cell Scaffolds

Function and clinical potential of microRNAs in hepatocellular carcinoma.

Bacterial Cellulose Nanofibers Promote Stress and Fidelity of 3D-Printed Silk Based Hydrogel Scaffold with Hierarchical Pores

Purification of a putative Na+ /D‐glucose cotransporter from pig kidney brush border membranes on a phlorizin affinity column

Fabrication, Characterization, and Biocompatibility Study of Gelatin-Blended Fibroin Scaffold

Nanofibrous Scaffold Prepared by Electrospinning of Poly(vinyl Alcohol)/gelatin Aqueous Solutions