Abstract:The lack of bioactivity of conventional medical materials leads to low osseointegration ability that may result in the occurrence of aseptic loosening in the clinic. To achieve high osseointegration, surface modifications with multiple biofunctions including degradability, osteogenesis, angiogenesis and antibacterial properties are required. However, the functions of conventional bioactive coatings are limited. Thus novel biofunctional magnesium (Mg) coatings are believed to be promising candidates for surface modification of implant materials for use in bone tissue repair. By physical vapour deposition, many previous researchers have deposited Mg coatings with high purity and granular microstructure on titanium alloys, polyetheretherketone, steels, Mg alloys and silicon. It was found that the Mg coatings with high-purity could considerably control the degradation rate in the initial stage of Mg alloy implantation, which is the most important problem for the application of Mg alloy implants. In addition, Mg coating on titanium (Ti) implant materials has been extensively studied both in vitro and in vivo, and the results indicated that their corrosion behaviour and biocompatibility are promising. Mg coatings continuously release Mg ions during the degradation process, and the alkaline environment caused by Mg degradation has obvious antibacterial effects. Meanwhile, the Mg coating has beneficial effects on osteogenesis and osseointegration, and increases the new bone-regenerating ability. Mg coatings also exhibit favourable osteogenic and angiogenic properties in vitro and increased long-term bone formation and early vascularization in vivo. Inhibitory effects of Mg coatings on osteoclasts have also been proven, which play a great role in osteoporotic patients. In addition, in order to obtain more biofunctions, other alloying elements such as copper have been added to the Mg coatings. Thus, Mg-coated Ti acquired biofunctions including degradability, osteogenesis, angiogenesis and antibacterial properties. These novel multi-functional Mg coatings are expected to significantly enhance the long-term safety of bone implants for the benefit of patients. This paper gives a brief review of studies of the microstructure, degradation behaviours and biofunctions of Mg coatings, and directions for future research are also proposed.

Polymer coatings on magnesium‐based implants for orthopedic applications

Polymeric Coatings for Magnesium Alloys for Biodegradable Implant Application: A Review

A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants

Polymer bilayer-Micro arc oxidation surface coating on pure magnesium for bone implantation

Surface Engineering of Biodegradable Magnesium Alloys for Enhanced Orthopedic Implants.

A Comprehensive Review on Surface Modifications of Biodegradable Magnesium-Based Implant Alloy: Polymer Coatings Opportunities and Challenges

Advances in functionalized polymer coatings on biodegradable magnesium alloys – A review

Biofunctional magnesium coating of implant materials by physical vapour deposition

Biodegradable and Bioactive Orthopedic Magnesium Implants with Multilayered Protective Coating.

Corrosion and biocompatibility improvement of magnesium-based alloys as bone implant materials: a review

Magnesium based implants: Alloying and coating strategies for improvement in its biomechanical and biocorrosion properties

In Vitro Corrosion and Cytocompatibility of A Microarc Oxidation Coating and Poly(L-Lactic Acid) Composite Coating on Mg-1li-1ca Alloy for Orthopedic Implants

Surface Modification by Natural Biopolymer Coatings on Magnesium Alloys for Biomedical Applications

Biodegradable Poly(L-lactic acid) (PLLA) Coatings Fabricated from Non-Solvent Induced Phase Separation for Improving Corrosion Resistance of Magnesium Rods in Biological Fluids.

An Analytical Review on the Degradation Mechanisms and Magnesium Alloy Protective Coatings in Biomedical Applications

Magnesium Alloys With Tunable Interfaces as Bone Implant Materials

A novel Ca-Mg-P/PDA composite coating of Mg alloys to improve corrosion resistance for orthopedic implant materials

Performance of PEO/Polymer Coatings on the Biodegradability, Antibacterial Effect and Biocompatibility of Mg-Based Materials

Novel biodegradable calcium phosphate/polymer composite coating with adjustable mechanical properties formed by hydrothermal process for corrosion protection of magnesium substrate

Enhancing biocompatibility of magnesium implants: nanocomposite coating for corrosion resistance and bioactivity

Composite Nanocoatings of Biomedical Magnesium Alloy Implants: Advantages, Mechanisms, and Design Strategies