Abstract:This paper describes the main results from an experimental investigation into tailoring the phase content and grain structure for high strength of a microstructurally flexible high entropy alloy (HEA), Fe42Mn28Co10Cr15Si5 (in at%), using rolling, friction stir processing (FSP), and compression. Optical microscopy, neutron diffraction, and electron backscatter diffraction were employed to characterize microstructure and texture evolution. The material upon rolling was found to have triplex structure consisting of metastable gamma austenite (γ), stable sigma (σ), and stable epsilon martensite (ε) phases. The adaptive phase stability exhibited by the selected HEA of very low stacking fault energy with strain, strain rate, and temperature was used along with grain refinement to enhance the strength. To this end, the complex structure was refined by FSP at 350 revolutions per minute (RPM) tool rotation rate, while increasing the fraction of γ and decreasing the σ and ε content. The strength was further enhanced by FSP at 150 RPM by further refinement of the grain structure and increasing the fraction of ε phase. The peak ultimate tensile strength of ~1850 MPa was achieved by double pass FSP (350 RPM followed by 150 RPM), the sequence which even more refined the microstructure and increased the fraction of σ phase. While the content of diffusion created σ phase remains constant during subsequent compression, the fraction of ε increases due to the diffusionless strain induced γ→ε phase transformation. The transformation facilitates plastic strain accommodation and rapid strain hardening, which has been attributed to the increase in highly dislocated ε phase fraction and transformation induced dynamic Hall-Petch-type barrier effect. Interestingly, a great deal of hardening ability was exhibited by the HEA even at very high strength. Roles of texture, grain size, and phase content on the transformation during compression have been rationalized and discussed in this paper.

Tuning martensitic transformations via coherent second phases in nanolaminates using free energy landscape engineering

Modifying macroscale variant combinations in a two-dimensional structure using mechanical loadings during thermally induced transformation

Phase Transformations and Shape Memory Effects in Finite Length Nanostructures

Tunability of martensitic behavior through coherent nanoprecipitates and other nanostructures

Modulated Martensite: Why it forms and why it deforms easily

A three-dimensional phase-field model for studying the orientation-dependent interface evolution in stress-induced martensitic phase transformation

Phase field simulations of coupled phase transformations in ferroelastic-ferroelastic nanocomposites

Efficient phase-field simulation for linear superelastic NiTi alloys under temperature gradients

Coexistence of strain glass transition and martensitic transformation in highly nickel-rich ferroelastic alloy with large elastocaloric effect

Effects of plasticity-induced martensitic transformation and grain refinement on the evolution of microstructure and mechanical properties of a metastable high entropy alloy

Tuning Thermal Expansion by a Continuing Atomic Rearrangement Mechanism in a Multifunctional Titanium Alloy

A micro-mechanical model of non-thermo-elastic martensitic transformation

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

Phase-field modelling of paramagnetic austenite–ferromagnetic martensite transformation coupled with mechanics and micromagnetics

Pathways to Titanium Martensite

Grain boundary-induced martensitic transformations: A phase-field study of nucleation, size-effect, triple junction-effect, microstructures, and compatibility at the nanoscale

An atomistic perspective of martensite twinning in Iron

Atomic scale modeling of the coherent strain field surrounding Ni4Ti3 precipitate and its effects on thermally-induced martensitic transformation in a NiTi alloy

Tunability of Martensitic Transformation with Cohesive Energies for Fe80−xMnxCo10Cr10 High-Entropy Alloys

A novel two-stage martensitic transformation induced by nanoscale concentration modulation in a TiNb-based shape memory alloy

Constitutive modelling of mechanically induced martensitic transformations: Prediction of transformation surfaces