Abstract:This study proposes a direct synthesis-based two-degree-of-freedom (2-DOF) controller for various types of integrating processes with time delays. This 2-DOF controller includes a proportional-integral-derivative (PID) controller to enhance load disturbance rejection performance and a set-point filter to improve servo response performance. The main PID controller parameters are expressed as process model parameters and a single adjustment variable, while the set-point filter is composed of PID controller parameters with weighted factors. The adjustment variable is tuned to achieve an optimal balance between response performance and robustness, based on the maximum magnitude of the sensitivity function (Ms). Controller parameters for various Ms values and guidelines for setting these parameters are provided in a consistent formulaic form using a curve-fitting method. These parameter-setting formulas facilitate the accurate implementation of PID controllers with specified Ms values and allow the controller design to be extended to processes with larger dimensionless time delays for a given Ms value. Although a 2-DOF controller was proposed, the adjustment variable for setting the parameters of the main PID controller and the set-point filter was solely the desired time constant. The proposed method was applied to various integrating processes with time delays, and its performance was compared with existing methods reported in the literature, based on performance indices such as settling time, overshoot, integral of absolute error, total variation in input usage, and global performance index. Simulations were conducted using six examples of various integrating processes with time delays to verify the effectiveness and applicability of the proposed controller.

An I + PI Controller Structure for Integrating Processes with Dead-Time: Application to Depth Control of an Autonomous Underwater Vehicle

An Improved PI Controller for Stiction Compensation of Control Valves in Process Industry

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

Design Of The Depth Controller For A Floating Ocean Seismograph

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

Intelligent-PID with PD Feedforward Trajectory Tracking Control of an Autonomous Underwater Vehicle

Anti-disturbance Depth Control Based on the Robust $$L_{1}$$ Filter for Under-Actuated AUV with Switched Linear Parameter Varying Dynamics

Robust Digital PI Control for Uncertain Time‐delay Systems in Process Industry

Disturbance Observer based Control of Integrating Processes with Dead-Time using PD controller

Robust digital double PI control for a general process with time-varying time delay

Trajectory following and stabilization control of fully actuated AUV using inverse kinematics and self-tuning fuzzy PID

Centralized Pi/Pid Controller Design for Multivariable Processes

A Double Closed-loop Integral Sliding Mode Controller for Position and Attitude Tracking of Underwater Vehicle

Enhancing AUV Autonomy With Model Predictive Path Integral Control

Discrete PID Control for Integrator Processes with Time Delay

DS based 2-DOF PID controller for various integrating processes with time delay

Autopilot System for Depth and Pitch Control in Underwater Vehicles: Navigating Near-Surface Waves and Disturbances

Optimal iterative learning PI controller for SISO and MIMO processes with machine learning validation for performance prediction

Dynamics Modeling and Motion Control of an New Unmanned Underwater Vehicle

Optimal PI–PD Controller Design for Pure Integrating Processes with Time Delay

A Prototype of Newly Dynamic Underwater Vehicle Using Fuzzy PID Control