Abstract:In order to verify the feasibility of three-dimensional (3D) printing technology in preparing the metamaterial absorbers with complex structure, a three-layer broadband absorbing metamaterial is designed and fabricated by 3D printing technology. The surface layer and middle layer of the metamaterial are composed of periodic arrays with different unit dimensions and the bottom layer of a slab structure. The optimized thickness of the metamaterial is 4.7 mm. A composite absorbent which consists of carbonyl iron powder and nylon is used to fabricate the absorber. In experiment, the obtained absorber is vertically irradiated by an electromagnetic (EM) wave. Two strong absorption peaks at 5.3 GHz and 14.1 GHz are achieved, with the reflection losses of -15.1 dB and -12.5 dB, respectively. The superposition of the two absorption peaks results in a reflection loss below -10 dB in a range from 4 to 18 GHz. The effective EM parameters of the surface layer and the middle layer are calculated by the S parameter inversion method. An effective model of the three-layer structure absorber is proposed and its reflectivity is calculated by using a multilayer structure reflectivity formula. The calculated reflectivity agrees well with the measured one. The absorbing and resonance mechanisms of the two absorption peaks are investigated by analyzing the dynamic distributions of power density loss, electric field and magnetic field. It can be clearly confirmed that the reflection losses at 5.3 GHz and 14.1 GHz are primarily concentrated on the bottom layer and surface layer, and the broadband absorption performance can be derived from the superposition of broadband absorptions of the three absorbing layers. Meanwhile, the strong electric coupling effect between the adjacent units in the surface layer is demonstrated by analyzing the electric-field distributions, which indicates that the strong reflection loss at 14.1 GHz is mainly caused by the electric response. The multiple scattering effects among the three layers are also considered according to the magnetic field distributions at two resonance frequencies. It is shown that there are two magnetic responses at 5.3 GHz and 14.1 GHz, respectively, and the multiple scattering contributes to increasing the EM wave propagation distance and enhancing the power loss. The designed absorbing metamaterials in this paper achieve good broadband absorption performances, particularly in the low frequency band. Combined with 3D printing rapid technology, a promising route to constructing 3D absorbing metamaterials with complex structures is proposed, which would be of great significance and broad practical prospect.

Production Method of Millimeter-Wave Absorber with 3D-Printed Mold

The Design and Preparation of a 3D Microwave Absorber Based on Carbon Black-Filled Epoxy Resin for X-band Application

Asymmetric Three-Dimensional Metamaterial Absorber for Microwave Application

Design of a High-Efficient Metamaterial X-band Absorber Composed of a Dielectric Cylinder Combined with a Thin Magnetic Cylinder Unit

Development of epoxy-based millimeter absorber with expanded polystyrenes and carbon black

A Miniaturized Ultra-wideband Resistive Film Absorber for Radiation Suppression

3D-Printed Shape Memory Absorber Based on CE/CNTs/CIP Ternary Composites for Tunable and Wideband Electromagnetic Wave Absorption

High-efficiency and Wide-Bandwidth Microwave Absorbers Based on MoS2-coated Carbon Fiber

Fabrication of High-Performance Electromagnetic Wave Absorbing SiC Composites Reinforced by 3D Printed Carbon-based Nanonetwork with Fe3O4 Nanoparticles

Structural Broadband Absorbing Metamaterial Based on Three-Dimensional Printing Technology

Electromagnetic and mechanical performance of 3D printed wave-shaped copper solid superstructures

Multi-material fused deposition modelling of structural–functional integrated absorber with multi-scale structure possessing tunable broadband microwave absorption

Constructing 3D Tent-Like frameworks in melamine hybrid foam for superior microwave absorption and thermal insulation

3D Printed Propeller-Like Metamaterial for Wide-Angle and Broadband Microwave Absorption

Wide-angle Microwave Absorption Properties of Multilayer Metamaterial Fabricated by 3D Printing

A High-performance Metamaterials Absorbing Structures Based on Fused Deposition Modeling

3D-Printed Dielectric-Resonator-Based Ultra-Broadband Microwave Absorber Using Water Substrate

3D Printed Labyrinth Multiresonant Composite Metastructure for Broadband and Strong Microwave Absorption

High efficiency and ultra-wideband water-based microwave absorber using 3D printing

A Light Weight and Broadband Metamaterial Absorber with 3d Cube Unit Cells

High Absorption of Electromagnetic Waves Based on 3D PMMA@Mxene@Co3O4 Composite Microsphere