Abstract:Amplitude-modulated (AM) harmonic motion imaging (HMI) is one of the radiation-force-based techniques, which has the capability of imaging tissue mechanical properties during the application of the acoustic radiation force. Since only displacement images have been presented until now, the theory between tissue displacement and modulus in AM-HMI has not been validated. Here, a finite-element model (FEM) is used to accurately model the dynamic response in tissue mimicking phantoms to evaluate HMI performance. The FEM and experimental results of phantoms with the same stiffness variations are compared and used to describe the behavior of tissue during the application of the stimulus. A harmonic force was generated by a 4.68 MHz single-element focused ultrasound (FUS) transducer. Since the focus is highly localized and has a harmonic response from AM beam, the motion characteristics can be directly related to the regional tissue modulus. The resulting motion was imaged simultaneously using a diagnostic (pulse-echo) transducer at center frequency of 7.5 MHz. RF signals were acquired using a standard pulse-echo technique with a PRF of 5.4 kHz. ID cross-correlation technique was performed to estimate the resulting axial displacement. In the FEM simulation, a rectangular mesh with dimensions of 35 mm in the axial and 30 mm in the lateral directions was generated. There were a total of 2771 nodes and 5424 triangular elements in the mesh. For simplicity, the mesh was assumed to be a purely elastic medium with Young's modulus of 10 kPa. The acoustic pressure field was simulated in Field II using the same transducer parameters as in the experiment. This pressure field was used as the excitation force to generate displacements. The imaging field was simulated in Matlab 7.2 using a 2D convolutional image formation model with 128 acoustic elements, a center frequency of 7.5 MHz and 40 MHz sampling frequency. Only the displacement estimation at the center RF lines was considered i- n the validation with the single-element pulse-echo transducer used in the experiments. A good agreement between the results from the FEM and experiment findings was observed in phantom study. Finally, in vivo application is presented.

Mechanically Powered Motion Imaging Phantoms: Proof of Concept

A modular torso phantom featuring a pneumatic stepper and flow for MR sequence development

Estimation of Physiological Motion Using Highly Accelerated Continuous 2D MRI

MRI-compatible abdomen phantom to mimic respiratory-triggered organ movement while performing needle-based interventions

A multi-modality medical imaging head and neck phantom: Part 2. Medical imaging

3D-printed Shepp-Logan phantom as a real-world benchmark for MRI

Ultrafast Ultrasound Imaging for Micro-Nanomotors: A Phantom Study

1-D Microwave Imaging of Human Cardiac Motion: An Ab-Initio Investigation

Evaluation of a motion measurement system for PET imaging studies

Experimental Validation of the Amplitude-Modulated Harmonic Motion Imaging for Tissues Stiffness Estimation

Design of an anthropomorphic PET phantom with elastic lungs and respiration modeling

A simulation-based phantom model for generating synthetic mitral valve image data-application to MRI acquisition planning

Time-Resolved Reconstruction of Motion, Force, and Stiffness using Spectro-Dynamic MRI

Phantom-based assessment of motion and needle targeting accuracy of robotic devices for magnetic resonance imaging-guided needle biopsy

Mechanically anisotropic phantoms for magnetic resonance elastography

ULTRASONIC IMAGING OF MUSCLE-LIKE PHANTOMS USING BIMORPH PMUTS TOWARD WEARABLE MUSCLE DISORDER DIAGNOSTICS

A Human Lower Limb Mechanical Phantom for the Testing of Knee Exoskeletons

Evaluation of the Accuracy and Robustness of a Motion Correction Algorithm for PET Using a Novel Phantom Approach

A modular motion compensation pipeline for prospective respiratory motion correction of multi-nuclear MR spectroscopy

High-fidelity anatomical phantoms for MRI practical training

9C-5 2D Simulation of the Harmonic Motion Imaging (HMI) with Experimental Validation