Abstract:As platform size is reduced, the flight of aerial robots becomes increasingly energetically expensive. Limitations on payload and endurance of these small robots have prompted researchers to explore the use of bimodal aerial-surface locomotion as a strategy to prolong operation time while retaining a high vantage point. In this work, we propose the use of ``ceiling effects'' as a power conserving strategy for small rotorcraft to perch on an overhang. In the vicinity of a ceiling, spinning propellers generate markedly higher thrust. To understand the observed aerodynamic phenomena}, momentum theory and blade element method are employed to describe the thrust, power, and rotational rate of spinning propellers in terms of propeller-to-ceiling distance. The models, which take into account the influence of neighboring propellers as present in multirotor vehicles, are verified using two propeller types 23-mm and 50-mm radii in various configurations on a benchtop setup. The results are consistent with the proposed models. In proximity to the ceiling, power consumption of propellers with 23-mm radius arranged in a quadrotor configuration was found to reduce by a factor of three. To this end, we present a conceptual prototype that demonstrates the use of ceiling effects for perching maneuvers. Overall, the promising outcomes highlight possible uses of ceiling effects for efficient bimodal locomotion in small multirotor vehicles
What problem does this paper attempt to address?
This paper attempts to solve the problem of excessive energy consumption when small rotorcraft stay in the air. Specifically, as the size of the aircraft decreases, its flight energy consumption becomes increasingly high, resulting in limitations on endurance time and payload capacity. To solve this problem, researchers have explored the use of the "ceiling effect" as an energy - saving strategy, enabling small rotorcraft to reduce energy consumption during hovering, thereby extending the operation time and maintaining a high - altitude observation position.
### Main Research Contents
1. **Utilization of the Ceiling Effect**:
- When the rotorcraft is close to the ceiling, the rotating propeller will generate significantly higher thrust, thus reducing energy consumption.
- The thrust, power, and rotational speed of the propeller at different ceiling distances are described by the momentum theory and the blade element method (BEM).
2. **Model Verification**:
- Experiments are carried out using two propellers of different sizes (with radii of 23 mm and 50 mm) to verify the proposed model.
- The experimental results show that in the case of being close to the ceiling, the energy consumption of the 23 - mm - radius propeller in the quad - rotor configuration is reduced by three times.
3. **Multi - Rotor Interaction**:
- Considering the mutual influence between multiple propellers in multi - rotor aircraft, a modified model considering asymmetric flow and wake recirculation is proposed.
- The dimensionless ceiling coefficient \(\gamma\) and other parameters are introduced to describe these effects.
4. **Experimental Verification**:
- The effectiveness of the model is verified through a series of experiments, including the measurement of thrust, torque, rotational speed, and power consumption in single - and multi - propeller configurations.
### Conclusion
This research shows that the ceiling effect can significantly reduce the energy consumption of small rotorcraft, especially when operating in indoor or high - rise building environments. This provides new ideas for achieving efficient dual - mode motion (i.e., aerial and surface motion), enabling small rotorcraft to continue to perform tasks such as monitoring, inspection, or communication while saving energy.
### Formula Summary
- Relationship between thrust and induced velocity:
\[
T = 2\rho A \gamma^2 v_i^2
\]
where \(\rho\) is the air density, \(A=\pi R^2\) is the propeller disk area, \(\gamma\) is the ceiling coefficient, and \(v_i\) is the induced velocity.
- Expression of the ceiling coefficient \(\gamma\):
\[
\gamma:=\frac{1}{2}+\frac{1}{2}\sqrt{1 + \frac{\alpha_0}{8\delta^2}}
\]
where \(\delta=\frac{R}{D}\) is the distance ratio from the propeller to the ceiling, and \(\alpha_0\) is a dimensionless coefficient describing non - axisymmetric flow and wake recirculation.
- Thrust coefficient \(c_T\):
\[
c_T = 2\rho A\left(\frac{2c_0 R\gamma}{c_1 - c_2\delta}+\sqrt{(c_1 - c_2\delta)^2 + 16c_0\gamma^2}\right)^2
\]
- Torque coefficient \(c_\tau\):
\[
c_\tau=\frac{1}{\eta}\sqrt{2\rho A}c_T^{3/2}
\]
where \(\eta\) is the efficiency coefficient.
These formulas show the specific effects of the ceiling effect on thrust, torque, and energy consumption, providing a theoretical basis for the design of more efficient micro - air vehicles.