Homogenization of Norton-Hoff fibered composites with high contrast

Michel Bellieud

DOI: https://doi.org/10.48550/arXiv.1904.03622

2020-06-15

Abstract:We study the steady creep flow of a perfectly viscoplastic solid reinforced by fibers with high viscosity contrast. Our study unveils new effects related to anisotropy and conditioned by the Norton exponent.

Analysis of PDEs

What problem does this paper attempt to address?

Creep Response of Carbon-Fiber-Reinforced Composite Using Homogenization Method

Mostafa Katouzian,Sorin Vlase

DOI: https://doi.org/10.3390/polym13060867

IF: 5

2021-03-11

Polymers

Abstract:The homogenization theory, used for the study of differential equations with periodic coefficients, with a rapid variation, is used in the paper for the analysis of the creep phenomenon of composite materials, reinforced with fibers. Generally, a polymer composite having a matrix with a viscoelastic response manifests a creep behavior. A good knowledge of mechanical constants allows us to predict the time response under the action of a load, which is important in engineering. The homogenization method is used to determine the engineering constants for a composite reinforced with carbon fibers. The method is applied for the particular case of fiber-reinforced unidirectional composites to obtain the equations that finally offer the required values. The epoxy matrix Fibredux 6376C is reinforced with carbon fibers T800 and the thermoplastic specimens made by APC2 material is reinforced with carbon fibers of the type IM6. The experimental results give a good concordance with the theoretical predictions.

polymer science
A second and third gradient material with torsion resulting from the homogenization of a highly contrasted rigid fibre-reinforced composite

Mustapha El Jarroudi

DOI: https://doi.org/10.1007/s00161-024-01278-4

2024-01-30

Continuum Mechanics and Thermodynamics

Abstract:We study the homogenization of an elastic material made of an elastic matrix in contact with highly contrasted three-dimensional elastic rigid fibres with circular cross section. The interaction between the matrix and the fibres is described by a local interface adhesion law. Assuming that the Lamé constants in the fibres and the stiffness coefficient of the adhesive have appropriate orders of magnitude, we derive a class of deformation energies involving second gradient functionals, third gradient functionals, and a functional energy associated with inner torsion.

thermodynamics,mechanics
Tailoring the Moduli of Composites Using Hollow Reinforcement

Guannan Wang,Wenqiong Tu,Marek-Jerzy Pindera

DOI: https://doi.org/10.1016/j.compstruct.2016.10.060

IF: 6.3

2016-01-01

Composite Structures

Abstract:Effects of hollow reinforcement on homogenized moduli and stress fields in unidirectional composites are investigated using an elasticity-based homogenization theory for periodic materials with hexagonal symmetries. The theory employs Fourier series representations for hollow fiber and matrix displacement fields in the cylindrical coordinate system which satisfy exactly the equilibrium equations and continuity conditions in the interior of the unit cell. The inseparable exterior problem requires satisfaction of periodicity conditions efficiently accomplished using previously introduced balanced variational principle. This principle ensures rapid solution convergence in the presence of thick or very thin-walled hollow fibers with relatively few harmonic terms. The solution’s analytical framework and stability facilitate parametric and optimization studies aimed at rapid identification of fiber wall-thickness impact on homogenized moduli and local fields in wide range of fiber volume fractions. This is illustrated for two material systems containing hollow glass fibers and alumina nanotubes as reinforcement, revealing new results of interest in the design of multifunctional porous materials. The results of parametric studies are made more precise upon incorporation of the locally-exact homogenization theory into the Particle Swarm Optimization algorithm, with the new computational capability employed to identify tube thickness as a function of the porosity volume fraction which minimizes the differences between target homogenized moduli and the corresponding matrix moduli. Analysis of a generalized Kirsch problem with an underlying microstructure based on targeted homogenized moduli around the cylindrical cavity demonstrates the homogenization theory’s utility in tailoring the local stress field with the aim of enhancing material toughness.
Creep failures in heterogeneous materials

H. Nechad,A. Helmstetter,R. El Guerjouma,D. Sornette

DOI: https://doi.org/10.1103/PhysRevLett.94.045501

2004-04-15

Abstract:We present creep experiments on fiber composite materials with controlled heterogeneity. Recorded strain rates and acoustic emission rates exhibit a power law relaxation in the primary creep regime (Andrade law) followed by a power law acceleration up to rupture over up to four decades in time. We discover that the failure time is proportional to the duration of the primary creep regime, showing the interplay between the two regimes and offering a method of rupture prediction. These experimental results are rationalized by a mean-field model of representative elements with nonlinear visco-elastic rheology and with a large heterogeneity of strengths.

Materials Science
Locally-exact homogenization of viscoelastic unidirectional composites

Guannan Wang,Marek-Jerzy Pindera

DOI: https://doi.org/10.1016/j.mechmat.2016.09.009

IF: 4.137

2016-01-01

Mechanics of Materials

Abstract:•An elasticity-based homogenization theory is extended to accommodate viscoelastic reinforcement via the correspondence principle.•An accurate and efficient inversion scheme is employed to transform the unit cell solution to the time domain.•Rapid convergence of the displacement-based solution is obtained in the time domain, validated through comparison with published data for both homogenized moduli and local stress fields.•New results on the effect of fiber array type (hexagonal vs square) reveal the importance of viscoelasticity on the homogenized response.•New results on the transmission of matrix viscoelastic features to macroscale support consistent construction of homogenized viscoelastic functions from experimental data.
Homogenization of high-contrast media in finite-strain elastoplasticity

Elisa Davoli,Chiara Gavioli,Valerio Pagliari

DOI: https://doi.org/10.48550/arXiv.2301.02170

2023-01-04

Analysis of PDEs

Abstract:This work is devoted to the analysis of the interplay between internal variables and high-contrast microstructure in inelastic solids. As a concrete case-study, by means of variational techniques, we derive a macroscopic description for an elastoplastic medium. Specifically, we consider a composite obtained by filling the voids of a periodically perforated stiff matrix by soft inclusions. We study the $\Gamma$-convergence of the related energy functionals as the periodicity tends to zero. The main challenge is posed by the lack of coercivity brought about by the degeneracy of the material properties in the soft part. We prove that the $\Gamma$-limit, which we compute with respect to a suitable notion of convergence, is the sum of the contributions resulting from each of the two components separately. Eventually, convergence of the energy minimizing configurations is obtained.
An asymptotic homogenization model for evaluating the mechanical properties of random fiber reinforced composites with high volume fraction

Xujiang Chao,Haoteng Hu,Lehua Qi,Cheng Yang,Wenlong Tian,Dahua Shou

DOI: https://doi.org/10.1016/j.coco.2023.101633

IF: 8

2023-06-09

Composites Communications

Abstract:In this study, we propose an asymptotic homogenization strategy based on local-global RVEs to predict the elastic properties of random fiber reinforced composites (RFCs) with high fiber volume fraction (HFVF). During the calculation, RFCs were divided into a set of local pseudo units with various material properties determined by its spatial orientation of the short fibers. The macroscopic mechanical properties of the RFCs with HFVF were asymptotically determined by integrating transformation matrices, periodic boundary conditions, and numerical homogenization method. The results show that the proposed models were in good agreement with the experimental tests of short fiber reinforced magnesium matrix (C fs /Mg) composites. When the length ratio of the RVE to the local pseudo L / L s was >10, the overall orientation of the fibers tended to be completely random, and the results gradually converged. With an increase in the fiber volume fraction, the effective elastic properties of the C fs /Mg composites grew linearly. Additionally, the proposed asymptotic homogenization framework can also be extended to evaluate other macroscopic physical properties of RFCs such as thermal and electric conductivities.

materials science, composites
Locally-exact Homogenization of Unidirectional Composites with Coated or Hollow Reinforcement

Guannan Wang,Marek-Jerzy Pindera

DOI: https://doi.org/10.1016/j.matdes.2015.12.168

IF: 9.417

2016-01-01

Materials & Design

Abstract:Effects of coated and hollow reinforcement on homogenized moduli and stress fields in unidirectional composites are investigated using elasticity-based homogenization theory for periodic materials with hexagonal and tetragonal symmetries extended to accommodate coatings. The theory employs Fourier series representations for fiber, coating and matrix displacement fields in the cylindrical coordinate system that satisfy exactly equilibrium equations and continuity conditions in the interior of the unit cell. The inseparable exterior problem requires satisfaction of periodicity conditions efficiently accomplished using previously introduced balanced variational principle which ensures rapid displacement solution convergence in the presence of thick or very thin coatings with relatively few harmonic terms. The solution's stability facilitates rapid identification of coatings' impact on homogenized moduli and local fields in wide ranges of fiber volume fraction and coating thickness. Elastic response of unidirectional composites reinforced by hollow fibers may be obtained without specializing the theory's framework by appropriately adjusting input parameters. This is illustrated using alumina nanotubes as reinforcement, revealing new results of interest in the design of multifunctional porous materials. Equally important, the theory's analytical framework requires minimal effort in constructing input data file that defines the unit cell problem, facilitating use by researchers with little mechanics exposure.
Asymptotics of the stress concentration in high-contrast elastic composites

Haigang Li,Longjuan Xu

DOI: https://doi.org/10.48550/arXiv.2004.06310

2020-10-27

Abstract:A long-standing area of materials science research has been the study of electrostatic, magnetic, and elastic fields in composite with densely packed inclusions whose material properties differ from that of the background. For a general elliptic system, when the coefficients are piecewise Hölder continuous and uniformly bounded, an $\varepsilon$-independent bound of the gradient was obtained by Li and Nirenberg \cite{ln}, where $\varepsilon$ represents the distance between the interfacial surfaces. However, in high-contrast composites, when $\varepsilon$ tends to zero, the stress always concentrates in the narrow regions. As a contrast to the uniform boundedness result of Li and Nirenberg, in order to investigate the role of $\varepsilon$ played in such kind of concentration phenomenon, in this paper we establish the blow-up asymptotic expressions of the gradients of solutions to the Lamé system with partially infinite coefficients in dimensions two and three. We discover the relationship between the blow-up rate of the stress and the relative convexity of adjacent surfaces, and find a family of blow-up factor matrices with respect to the boundary data. Therefore, this work completely solves the Babuuska problem on blow-up analysis of stress concentration in high-contrast composite media. Moreover, as a byproduct of these local analysis, we establish an extended Flaherty-Keller formula on the global effective elastic property of a periodic composite with densely packed fibers, which is related to the "Vigdergauz microstructure" in the shape optimization of fibers.

Analysis of PDEs
Homogenized Moduli and Local Stress Fields of Unidirectional Nano-Composites

Guannan Wang,Qiang Chen,Zhelong He,Marek-Jerzy Pindera

DOI: https://doi.org/10.1016/j.compositesb.2017.11.029

2018-01-01

Abstract:The recently generalized locally-exact homogenization theory is further extended to enable the determination of homogenized moduli and local stress fields in unidirectional nano-composites with surface effects based on the Gurtin-Murdoch model. The excellent stability and quick convergence of the homogenization theory with the concomitant rapid execution times enables repetitive solutions of the unit cell problem with variable geometric and material parameters, thereby enabling extensive parametric studies to be conducted efficiently. The distinguishing feature of the theory is its ability to provide accurate homogenized moduli as well as accurate local stress fields for square, rectangular and hexagonal arrays of nano-inclusions or nano-porosities. The extended elasticity-based computational capability is validated by published results on homogenized moduli and stress concentrations in nanoporous aluminum obtained using classical micromechanics, elasticity-based, semi-analytical and numerical approaches. New results are generated aimed at demonstrating the effects of nanopore arrays on homogenized moduli and local stress fields in a wide range of porosity volume fractions and nanopore radii. These results highlight the importance of adjacent pore interactions either neglected or not directly taken into account in the classical micromechanics models, nor easily captured by numerical techniques.
A Dual Homogenization and Finite Element Approach for Material Characterization of Textile Composites

XQ Peng,J Cao

DOI: https://doi.org/10.1016/s1359-8368(01)00052-x

IF: 11.322

2002-01-01

Composites Part B Engineering

Abstract:A novel procedure for predicting the effective nonlinear elastic moduli of textile composites through a combined approach of the homogenization method and the finite element formulation is presented. The homogenization method is first applied to investigate the meso-microscopic material behavior of a single fiber yarn based on the properties of the constituent phases. The obtained results are compared to existing analytical and experimental results to validate the homogenization method. Very good agreements have been obtained. A unit cell is then built to enclose the characteristic periodic pattern in the textile composites. Various numerical tests such as uni-axial and bi-axial extension and trellising tests are performed by 3D finite element analysis on the unit cell. Characteristic behaviors of force versus displacement are obtained. Meanwhile, trial mechanical elastic constants are imposed on a four-node shell element with the same outer size as the unit cell to match the force–displacement curves. The effective nonlinear mechanical stiffness tensor is thus obtained numerically as functions of elemental strains. The procedure is exemplified on a plain weave glass composite and is validated by comparing to experimental data. Using the proposed approach, the nonlinear behavior of textile composites can be anticipated accurately and efficiently.
Measure of combined effects of morphological parameters of inclusions within composite materials via stochastic homogenization to determine effective mechanical properties

Vladimir Salnikov,Sophie Lemaitre,Daniel Choï,Philippe Karamian-Surville

DOI: https://doi.org/10.1016/j.compstruct.2015.03.076

IF: 6.3

2015-10-01

Composite Structures

Abstract:In our previous papers we have described efficient and reliable methods of generation of representative volume elements (RVE) perfectly suitable for analysis of composite materials via stochastic homogenization.In this paper we profit from these methods to analyze the influence of the morphology on the effective mechanical properties of the samples. More precisely, we study the dependence of main mechanical characteristics of a composite medium on various parameters of the mixture of inclusions composed of spheres and cylinders. On top of that we introduce various imperfections to inclusions and observe the evolution of effective properties related to that.The main computational approach used throughout the work is the FFT-based homogenization technique, validated however by comparison with the direct finite elements method. We give details on the features of the method and the validation campaign as well.

mechanics,materials science, composites
Contrast-Enhanced Imaging of Carbon Fiber Composites using Hafnium Oxide Nanocrystals

Eline Goossens,Ives De Baere,Yuriy Sinchuk,Evert Dhaene,John De Vos,Matthieu Boone,Jonathan De Roo,Isabel Van Driessche,Wim Van Paepegem,Klaartje De Buysser

DOI: https://doi.org/10.26434/chemrxiv-2024-k00w2

2024-07-15

Abstract:Carbon fiber reinforced polymers (CFRPs) are of utmost importance in high-performance structural applications (e.g. aerospace, automotive, wind energy), but their behaviour is not fully understood. Damage propagation models need to take into account the type, geometry and orientation of a multitude of failure mechanisms and defects. Micro-Computed Tomography (micro-CT) data could provide the necessary input for these models, but the poor contrast between the carbon fibers and the polymer matrix does not allow automatic geometry extraction. To overcome this issue, hafnium oxide nanocrystals (HfO2 NCs) were introduced as CT contrast agents to the polymer matrix to provide the required contrast. To ensure a homogeneous and stable dispersion of the NCs in the epoxy resin, a bisphosphonic acid ligand consisting of ethylene glycol oligomer segments is used. The NCs do not significantly alter important parameters such as matrix stiffness, viscosity, glass transition temperature and curing time, enabling them to be implemented without having to alter current composite resin infusion methods. NC-doped CFRPs with 5 and 10 m% of HfO2 NCs added show a drastic improvement in CT contrast, allowing for segmentation of the carbon fiber tows and visualization of micrometer-scale cracks. The contrast-enhanced HfO2 NC-doped composites thereby enable the validation of damage models by accurate micro-CT data.

Chemistry
Toughening by crack deflection in the homogenization of brittle composites with soft inclusions

Marco Barchiesi

DOI: https://doi.org/10.1007/s00205-017-1173-5

2016-11-08

Abstract:We present a simple example of toughening mechanism in the homogenization of composites with soft inclusions, produced by crack deflection at microscopic level. We show that the mechanism is connected to the irreversibility of the crack process. Because of that it cannot be detected through the standard homogenization tool of the $\Gamma$-convergence.

Analysis of PDEs
Creep rupture in carbon nanotube-based viscoplastic nanocomposites

Xiaodong Xia,Xiang Guo,George J. Weng

DOI: https://doi.org/10.1016/j.ijplas.2021.103189

IF: 8.5

2022-03-01

International Journal of Plasticity

Abstract:While the linear viscoelastic characteristics of polymer composites have been extensively studied, the nonlinear creep with progressive damage leading to the ultimate creep rupture in CNT-based viscoplastic nanocomposites still remains a challenging issue. In this paper, a unified approach is presented to study the whole lifetime of creep process including deformation, damage, and creep rupture. First, based on the concept of secant viscosity, a linear viscoelastic comparison composite is introduced to mimic the nonlinear viscoplastic nanocomposite, with the linear part further formulated in the Laplace transformed domain. Then, both progressive degradation of the interphase and creep damage of the polymer matrix are presented. A joint field-fluctuation method and work-rate equivalence is subsequently utilized to calculate the effective Mises stress and hydrostatic stress of the viscoplastic matrix. The principle of irreversible thermodynamics is then invoked to derive the thermodynamic driving force to characterize the evolution of creep damage and rupture process. After the theory is developed, it is demonstrated that the predicted effective creep strains of multi-walled CNT/polypropylene nanocomposites are calibrated by the experiments spanning over the whole three stages of primary creep, secondary creep, and tertiary creep. Both creep rupture time and rupture strain of the overall nanocomposite are found to increase with CNT volume concentration. It is concluded that population of CNT nanofillers can remarkably enhance the creep rupture resistance of CNT/polymer viscoplastic nanocomposites.

materials science, multidisciplinary,engineering, mechanical,mechanics
Nonuniform Interfacial Slip in Fibrous Composites

Xu Wang

DOI: https://doi.org/10.2140/jomms.2009.4.107

2009-01-01

Journal of Mechanics of Materials and Structures

Abstract:We consider a solitary circular elastic inclusion bonded to an infinite elastic matrix through a linear viscous interface. Here the viscous interface with vanishing thickness can simulate the Nabarro-Herring or Coble creep of a thin interphase layer between the fiber and the matrix. The interface drag parameter is varied along the interface to reflect the real thickening and thinning of the interphase layer. In particular, we consider a special form of the interface function that yields closed-form solutions in terms of elementary functions under four loading conditions: the matrix is subjected to remote uniform antiplane shearing; a screw dislocation is located in the matrix; a screw dislocation is located inside the inclusion; and uniform eigenstrains are imposed on the inclusion.Our results show that a nonuniform interface parameter will induce an intrinsically nonuniform stress field inside the inclusion when the matrix is subjected to remote uniform shearing or when uniform eigenstrains are imposed on the inclusion, and will also result in a noncentral image force acting on the screw dislocation. In addition, the nonuniformity of the interface will increase the characteristic time of the composite. More interestingly our results show that there coexist at the same time a transient stable and another transient unstable equilibrium positions for a screw dislocation in the matrix when the viscous interface is extremely nonuniform and when the inclusion is stiffer than the matrix. Also discussed is the overall time-dependent shear modulus of the fibrous composite by using the Mori-Tanaka mean-field method.
Non-local modeling with asymptotic expansion homogenization of random materials

Sami Ben Elhaj Salah,Azdine Nait-Ali,Mikael Gueguen,Carole Nadot-Martin

DOI: https://doi.org/10.1016/j.mechmat.2020.103459

IF: 4.137

2020-08-01

Mechanics of Materials

Abstract:The aim of this study is to build a non-local homogenized model for three-dimensional composites with inclusions randomly embedded within a matrix according to a stochastic point process <math>w=(wi)i∈N</math> in a bounded open set of <math>R3</math> associated with a suitable probability space (<math>⅁,A,P</math>) as defined in (<a class="workspace-trigger" href="#bib0026">Nait-ali, 2017</a>) and (Michaille et al., 2011). Both phases were linear elastic. Asymptotic expansion homogenization (AEH) was revisited by taking into account the stochastic parameter (w) representing the inclusion centers distribution. The macroscopic behavior was then studied by combining the variational approach with the mean-ergodicity. At the end, the advanced approach makes naturally emerge non-local terms (involving the second displacement gradient) as well as a strong microstructural content through the presence of the characteristic tensors in the expression of the homogenized elastic energy. Microstructures with a high contrast between constituents Young′s modulus leading to non-local effects were considered to test the model. Virtual microstructures were first generated with a fixed, simple, pattern before considering real microstructures of Ethylene Propylene Dien Monomer (EPDM) containing cavities in order to envision morphological situations with increasing complexity.

materials science, multidisciplinary,mechanics
Homogenization of a Poroelasticity Model for Fibre-Reinforced Hydrogels

Michael Eden,Hari Shankar Mahato

DOI: https://doi.org/10.48550/arXiv.2008.10496

2020-08-24

Analysis of PDEs

Abstract:In this paper, the analysis and homogenization of a poroelastic model for the hydro-mechanical response of fibre-reinforced hydrogels is considered. Here, the medium in question is considered to be a highly heterogeneous two-component media composed of a connected fibre-scaffold with periodically distributed inclusions of hydrogel. While the fibres are assumed to be elastic, the hydromechanical response of hydrogel is modeled via \emph{Biot's poroelasticity}. We show that the resulting mathematical problem admits a unique weak solution and investigate the limit behavior (in the sense of two-scale convergence) of the solutions with respect to a scale parameter, characterizing the heterogeneity of the medium. Letting this scale parameter tend to zero, we arrive at an effective model where the micro variations of the pore pressure give rise to a micro stress correction at the macro scale.
Multiscale modeling of fiber reinforced materials via non-matching immersed methods

Giovanni Alzetta,Luca Heltai

DOI: https://doi.org/10.1016/j.compstruc.2020.106334

2020-06-15

Abstract:Fiber reinforced materials (FRMs) can be modeled as bi-phasic materials, where different constitutive behaviors are associated with different phases. The numerical study of FRMs through a full geometrical resolution of the two phases is often computationally infeasible, and therefore most works on the subject resort to homogenization theory, and exploit strong regularity assumptions on the fibers distribution. Both approaches fall short in intermediate regimes where lack of regularity does not justify a homogenized approach, and when the fiber geometry or their numerosity render the fully resolved problem numerically intractable. In this paper, we propose a distributed Lagrange multiplier approach, where the effect of the fibers is superimposed on a background isotropic material through an independent description of the fibers. The two phases are coupled through a constraint condition, opening the way for intricate fiber-bulk couplings as well as allowing complex geometries with no alignment requirements between the discretisation of the background elastic matrix and the fibers. We analyze both a full order coupling, where the elastic matrix is coupled with fibers that have a finite thickness, as well as a reduced order model, where the position of their centerline uniquely determines the fibers. Well posedness, existence, and uniquess of solutions are shown both for the continuous models, and for the finite element discretizations. We validate our approach against the models derived by the rule of mixtures, and by the Halpin-Tsai formulation.

Numerical Analysis

Homogenization of Norton-Hoff fibered composites with high contrast

Creep Response of Carbon-Fiber-Reinforced Composite Using Homogenization Method

A second and third gradient material with torsion resulting from the homogenization of a highly contrasted rigid fibre-reinforced composite

Tailoring the Moduli of Composites Using Hollow Reinforcement

Creep failures in heterogeneous materials

Locally-exact homogenization of viscoelastic unidirectional composites

Homogenization of high-contrast media in finite-strain elastoplasticity

An asymptotic homogenization model for evaluating the mechanical properties of random fiber reinforced composites with high volume fraction

Locally-exact Homogenization of Unidirectional Composites with Coated or Hollow Reinforcement

Asymptotics of the stress concentration in high-contrast elastic composites

Homogenized Moduli and Local Stress Fields of Unidirectional Nano-Composites

A Dual Homogenization and Finite Element Approach for Material Characterization of Textile Composites

Measure of combined effects of morphological parameters of inclusions within composite materials via stochastic homogenization to determine effective mechanical properties

Contrast-Enhanced Imaging of Carbon Fiber Composites using Hafnium Oxide Nanocrystals

Toughening by crack deflection in the homogenization of brittle composites with soft inclusions

Creep rupture in carbon nanotube-based viscoplastic nanocomposites

Nonuniform Interfacial Slip in Fibrous Composites

Non-local modeling with asymptotic expansion homogenization of random materials

Homogenization of a Poroelasticity Model for Fibre-Reinforced Hydrogels

Multiscale modeling of fiber reinforced materials via non-matching immersed methods