Abstract:Polyamide (PA) chemistry-based nanofiltration (NF) membranes have an important role in the field of seawater desalination and wastewater reclamation. Achieving an ultrathin and defect-free active layer via precisely controlled interfacial polymerization (IP) is an effective routine to improve the separation efficiencies of NF membranes. Herein, the morphologies and chemical structures of the thin-film composite (TFC) NF membranes were accurately regulated by tailoring the interfacial reaction temperature during the IP process. This strategy was achieved by controlling the temperature (-15, 5, 20, 35, and 50°) of the oil-phase solutions. The structural compositions, morphological variations, and separation features of the fabricated NF membranes were studied in detail. In addition, the formation mechanisms of the NF membranes featuring different PAs were also proposed and discussed. The temperature-assisted IP (TAIP) method greatly changed the compositions of the resultant PA membranes. A very smooth and thin PA film was obtained for the NF membranes fabricated at a low interfacial temperature; thus, a high 19.2 L m-2 h-1 bar-1 of water permeance and 97.7% of Na2SO4 rejection were observed. With regard to the NF membranes obtained at a high interfacial temperature, a lower water permeance and higher salt rejection with fewer membrane defects were achieved. Impressively, the high interfacial temperature-assisted NF membranes exhibited uniform coffee-ring-like surface morphologies. The special surface-featured NF membrane showed superior separation for selected heavy metals. Rejections of 93.9%, 97.9%, and 87.7% for Cu2+, Mn2+, and Cd2+ were observed with the optimized membrane. Three cycles of fouling tests indicated that NF membranes fabricated at low temperatures exhibited excellent antifouling behavior, whereas a high interface temperature contributed to the formation of NF membranes with high fouling tendency. This study provides an economical, facile, and universal TAIP strategy for tailoring the performances of TFC PA membranes for environmental water treatment.

Can the NF membrane directly obtained by the interfacial polymerization of MPD and TMC?

An Acid Resistant Nanofiltration Membrane Prepared from a Precursor of Poly(s-Triazine-amine) by Interfacial Polymerization

A NOVEL NANOFILTRATION MEMBRANE PREPARED WITH PAMAM AND TMC (I)

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Fabrication and Performance of a Low Operating Pressure Nanofiltration Poly(vinyl Chloride) Hollow Fiber Membrane

Preparation of TMC/TMPIP Nanofiltration Composite Membrane with Ultra-Thin Skin Layer

Toward Enhancing Desalination and Heavy Metal Removal of TFC Nanofiltration Membranes: A Cost-Effective Interface Temperature-Regulated Interfacial Polymerization

A Chlorine-Tolerant Nanofiltration Membrane Prepared by the Mixed Diamine Monomers of Pip and Bhttm

Interface Engineering of Microporous Polypropylene Membranes for Polyamide Thin-Film Composite Nanofiltration Membranes with Robust Structure and Superior Performance

Can the mix-charged NF membrane directly obtained by the interfacial polymerization of PIP and TMC?

A High Performance Silica–fluoropolyamide Nanofiltration Membrane Prepared by Interfacial Polymerization

Nanofiltration Membranes with Hydrophobic Microfiltration Substrates for Robust Structure Stability and High Water Permeation Flux

Nanofiltration membranes with enhanced performance by constructing an interlayer integrated with dextran nanoparticles and polyethyleneimine coating

High-performance zwitterionic TFC polyamide nanofiltration membrane based on a novel triamine precursor

An Efficient Co-Solvent Tailoring Interfacial Polymerization for Nanofiltration: Enhanced Selectivity and Mechanism

Molecular Design of the Polyamide Layer Structure of Nanofiltration Membranes by Sacrificing Hydrolyzable Groups Toward Enhanced Separation Performance.

Micelles regulated thin film nanocomposite membrane with enhanced nanofiltration performance

In-situ Interfacial Polymerization of Polyamide TFN Membranes by Adding a Diamino-Silane Coupling Agent: Toward Enhanced Desalination Performance

Codeposition of Catechol–polyethyleneimine Followed by Interfacial Polymerization for Nanofiltration Membranes with Enhanced Stability

A Novel Composite Nanofiltration Membrane Prepared by Interfacial Polymerization of 2,2′-Bis(1-hydroxyl-1-trifluoromethyl-2,2,2-trifluoroethyl)-4,4′-methylenedianiline and Trimesoyl Chloride

High permeance of polyamide nanofiltration membranes with porous organic polymers interlayers based on diazo coupling reaction