Abstract:The concentric face gear split-torque transmission system (CFGSTTS) has the advantages of a large reduction ratio and high power density. The CFGSTTS has considerable potential to be applied in helicopter main reducers. As such, in this study, we analyzed the load distribution characteristics of a dual input–dual output concentric face gear split-torque transmission system. A load-dependent time-varying meshing stiffness surrogate model was designed based on a feedforward neural network. The difference in the meshing stiffness between the pinion driving and face gear driving was analyzed. The coupled lumped parameter dynamic model of the bending–torsion–axis–pendulum was developed through Newton’s second law, and the influences of the time-varying meshing stiffness, backlash, comprehensive transmission error, support stiffness, and damping were considered. Finally, the impact of the support stiffness on the load-sharing coefficient was analyzed. An optimization model was constructed with the objective function of minimizing the sum of the load-sharing coefficients and was solved by the marine predator algorithm. In addition, the validity of the optimization results was verified with a finite element model. The results indicate that (1) smaller support stiffnesses of input gears benefit the corresponding load balance; (2) the support stiffnesses of the face gears have different laws of influence on the load-sharing coefficient at the input gear and idler, and the support stiffnesses of the other gears need to be comprehensively considered; (3) the larger supporting stiffnesses of the idler gears and tail gear are beneficial for decreasing the load-sharing coefficient at the input gear; and (4) the optimized load-sharing coefficients at Input Gears 1 and 2 and the idler gear decrease by 23.7%, 24.2%, and 4.6%, respectively.

Optimization design for dynamic characteristics of face gear drive with surface-active modification

A Novel Tooth Surface Modification Methodology for Wide-Faced Double-Helical Gear Pairs

Research on application of dynamic optimization modification for an involute spur gear in a fixed-shaft gear transmission system

Optimization of bias modification and dynamic behavior analysis of helical gear system

Research on Optimization of Face Gear Grinding Machine Structure Design Based on Dynamic Performance of Machine Tool

Sensitivity Analysis of Helical Gears with Tooth Surface Modification to Applied Torque and Gear Misalignment

Analysis of Vibration Characteristics of Face Gear powering-split Transmission System

Analysis of machining errors' effects on gear pair meshing using contact finite element method

Precise modeling of complex tooth surface microtopography and multi-degree-of-freedom nonlinear friction dynamics for high-performance face gear

Vibration characteristics analysis of face gear transmission system considering gyroscopic effect

Design and simulation of gear transmission system based on metamaterial

Multiobjective ease-off optimization of high-speed spiral bevel gear for loaded meshing performance

Coupled vibration modeling and dynamic characteristics of noncircular face gear drive system with time-varying instantaneous center excitation

Dynamic analysis of a helical gear reduction by experimental and numerical methods

Dynamics Modeling and Load-Sharing Performance Optimization of Concentric Face Gear Split-Torque Transmission Systems

Tooth Surface Modification for Helical Gear Pairs Considering Mesh Misalignment Tolerance

Study on multi-clearance nonlinear dynamic characteristics of herringbone gear transmission system under optimal 3d modification

Reliability design and optimization of the planetary gear by a GA based on the DEM and Kriging model

Impact of Gear Modification on Gear Dynamic Characteristics

Ease-off modification and tooth contact analysis for near net shape face-gear

Optimization of Topological Modification Parameters for Heavy-Duty Helical Gears