Abstract:Since the papyri, cellulose has played a significant role in human culture, especially as paper. Nowadays, this ancient product has found new applications in the expanding sector of bioactive paper. Simple paper-based detection devices such as lateral flow immunoassays (LFIAs) are inexpensive, rapid, userfriendly and therefore highly promising for providing resource-limited settings with point-of-care diagnostics. Recently, paper-based biosensing technology has trended towards three-dimensional microfluidic devices and multiplexed assay platforms. Yet, many multiplexed paper-based biosensors implement methods incompatible with the conventional LFIA carrier material: nitrocellulose. It thus tends to be replaced by pure cellulose. This major material change implies to undertake a covalent immobilization of biomolecules on cellulose which preserves their biological activity. Furthermore, the current global issues have stimulated the search for both ecologically and economically friendly (eco²-friendly) materials and processes. As a sustainable and affordable biopolymer, cellulose is an ideal material for developing diagnostic devices. However, the frame material is not the only aspect to consider. The whole device design and production, as well as the biosensing material immobilization or the non-sensing membranes treatment, should be as eco²-friendly as possible. Hence, the spatially controlled modification of cellulose surface seems crucial in the development of such devices since it enables to save expensive matter and to pattern surface properties. In any case, modification procedures should abide by the economic and ecological objectives aforementioned. In this perspective, three processes allowing easy, robust and sustainable modification of cellulose sheets were developed. All are environmentally friendly, simple, time and cost-saving, and versatile. The first procedure is a functionalization of cellulose membranes for covalent antibody immobilization. While cellulose chemical modification is usually operated under harsh conditions in organic solvents, the diazonium-based procedure developed was performed in water, at room temperature, in a single step. Paper sheets have thus been modified and bear different chemical functions which enable to graft biomolecules by common bioconjugate techniques and to perform LFIAs. The second is a chemical-free photoimmobilization procedure which allowed antibodies to be immobilized on cellulose without any photocoupling intermediate nor any biomolecule or substrate pretreatment. This immobilization technique was further combined to inkjet printing to localize the antibodies according to any pattern desired. Native antibodies have thus been printed and immobilized on paper sheets which therefore enable to perform LFIAs. Membranes’ performances were evaluated in terms of visual detection limit and challenged nitrocellulose performances. The third is a modification of cellulose membranes by polymer grafting. Unlike the two previous processes, this technique was developed in order to increase the functionality of the non-sensing cellulose parts of paper-based devices. Yet, it may be employed as another functionalization method for covalent antibody immobilization on cellulose. While cellulose graft copolymerization is usually performed through complex and expensive procedures, the diazonium-based approach employed was performed in water, at room temperature, in a short single step. Cellulose sheets have thus been grafted with several acrylic polymers, first globally through a dipping procedure and then locally by inkjet printing. All the strategies developed herein would be helpful to immobilize sensitive proteins on selected specific areas of cellulose sheets. More generally, these are powerful tools for easy and rapid modulation of cellulose surface properties according to complex designs, under soft and biocompatible conditions.

Flow control and imbibition dynamics studies in paper membranes using inert additives

Experimental studies on controlling dispersion and fluid flow in paper membranes/assays using hydrogel

Fluid Flow Dynamics in Partially Saturated Paper

Flow control by circular cavities in lateral flow porous membranes

Recent developments in flow modeling and fluid control for paper-based microfluidic biosensors

Spontaneous Imbibition in Paper-Based Microfluidic Devices: Experiments and Numerical Simulations

The micro-volume liquid focusing effect in Janus membrane and its biosensing application

Simple, biocompatible and robust modification of cellulose membranes for the eco²-friendly preparation of immunoassay devices

Using airflow-driven, evaporative gradients to improve sensitivity and fluid control in colorimetric paper-based assays

Effect of Additives on the Morphology and Performance of Symmetric Network PVDF Membranes

Surface modification of paper-based microfluidic devices via initiated chemical vapor deposition

Anomalous diffusion in an electrolyte saturated paper matrix

RAPID HEMATOCRIT ESTIMATION USING A FOLD-CREASE INDUCED FAST FLOWING PAPER SENSOR

Barrier-Free Microfluidic Paper Analytical Devices for Multiplex Colorimetric Detection of Analytes

Viscous Fingering of Miscible Liquids in Porous and Swellable Media for Rapid Diagnostic Tests

Surface Modification of Natural Cellulose Substances: Toward Functional Materials and Applications

Paper-based microfluidic devices: Fabrication, detection, and significant applications in various fields

The Key Role of Modifications in Biointerfaces toward Rendering Antibacterial and Antifouling Properties in Polymeric Membranes for Water Remediation: A Critical Assessment

Modulation the Morphologies and Performance of Polyacrylonitrile-Based Asymmetric Membranes Containing Reactive Groups: Effect of Non-Solvents in the Dope Solution

Cationized dialdehyde cellulose synthesized with deep eutectic-like solvents: Effects on sheet dewatering and mechanical properties when used as wet-end additive

Rational design of capillary-driven flows for paper-based microfluidics