Abstract:Methyl acetate is considered low toxicity volatile solvent produced either as a by-product during methanol carbonylation or via acetic acid esterification with methanol. In both cases, pure methyl acetate has to be isolated from the reaction mixture. Simulation of methyl acetate separation from its mixture with methanol by extraction distillation was carried out in ASPEN + software. In total three case studies were assumed using two different extraction solvents and two solvent regeneration strategies. In case A, novel extraction solvent 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid, was considered. Raw material separation was achieved in an extraction distillation column while the solvent regeneration was accomplished in a second distillation column in this case. In case study B, the same extraction solvent was used; however, its regeneration was carried out in a single-effect evaporator. Dimethyl sulfoxide was the second extraction solvent selected. Its use in methyl acetate-methanol separation is presented in case study C. As high purity of dimethyl sulfoxide was required for the methyl acetate-methanol azeotrope breaking, its regeneration was carried out in the second distillation column only. To simulate the ternary methyl acetate–methanol–extraction solvent mixtures separation, vapor–liquid equilibrium was predicted based on the NRTL equation. Further, unknown properties of the considered ionic liquid and variation of these properties with temperature were predicted and introduced into the ASPEN + components properties database. Based on these data, optimum operation parameters of the respective separation equipment were established. In all case studies, the same condition had to be fulfilled, namely minimum methyl acetate content in the distillate from the extraction distillation column of 99.5mol-%. Results of simulations using the respective optimum operation parameters were employed in the economic evaluation of the three separation unit designs studied. It was found that the least energy-demanding design corresponds to the case study B in terms of both capital as well as operation expenses.

Process design and simulation of methyl isobutyl ketone (MIBK) dehydration by batch distillation: A study on unit configuration and operational policies

Study on Macro-kinetics of Preparation of Tethyl Isobutyl Ketone Via Dehydrogenation of Methyl Isobutyl Carbinol

Study on the Removal of Mibk from Aqueous Solution by Vacuum Membrane Distillation

Design and Optimization of Heat-Integrated Distillation Column Schemes through a New Robust Methodology Coupled with a Boltzmann-Based Estimation of Distribution Algorithm

Process Development for Methyl Isobutyl Ketone Production Using the Low-Pressure One-Step Gas-Phase Selective Hydrogenation of Acetone

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Experimental and computer simulation of a molecular distillation process for the dehydration of tetramethylammonium hydroxide solution

Methyl acetate–methanol mixture separation by extractive distillation: Economic aspects

Design and control of extractive distillation for the separation of methyl acetate-methanol-water

Practical Preparation of Methyl Isobutyl Ketone by Stepwise Isopropylation Reaction of Acetone

Process Design, Simulation and Experimental studies of Heteroazeotropic Batch Distillation for Phenol Dehydration

Separation of the Mixture 2-Propanol + Water by Heterogeneous Azeotropic Distillation with Isooctane as an Entrainer

Process Design and Multi-Objective Optimization for Separation of Ternary Mixtures with Double Azeotropes Via Integrated Quasi-Continuous Pressure-Swing Batch Distillation

Energy-saving Investigation of Hybrid Reactive Distillation for N-Butyl Acetate Production from Two Blending Feedstocks

Concentration of 1,3-dimethyl-2-imidazolidinone in Aqueous Solutions by Sweeping Gas Membrane Distillation: From Bench to Industrial Scale

Simulation Study on a Reactive Distillation Process of Methyl Acetate Hydrolysis Intensified by Reaction of Methanol Dehydration

Design and comprehensive analysis of a novel pressure-swing batch distillation process for the separation of a binary azeotrope with various boiling behaviors

Sequential Two-Column Batch Distillation Processes for Separation of Ternary Mixture Containing Three Binary Minimum Boiling Point Homoazeotropes

A novel reactive-extractive distillation process for separation of water/methanol/tetrahydrofuran mixtures

Design and Control of Dimethyl Carbonate–Methanol Separation Via Pressure-Swing Distillation

Optimisation of semi-batch reactive distillation column for the synthesis of methyl palmitate