Abstract:Future wireless communication systems are expected to explore spectral bands typically used by radar systems, in order to overcome spectrum congestion of traditional communication bands. Since in many applications radar and communication share the same platform, spectrum sharing can be facilitated by joint design as dual function radar-communications system. In this paper, we propose a joint transmit beamforming model for a dual-function multiple-input-multiple-output (MIMO) radar and multiuser MIMO communication transmitter sharing the spectrum and an antenna array. The proposed dual-function system transmits the weighted sum of independent radar waveform and communication symbols, forming multiple beams towards the radar targets and the communication receivers, respectively. The design of the weighting coefficients is formulated as an optimization problem whose objective is the performance of the MIMO radar transmit beamforming, while guaranteeing that the signal-to-interference-plus-noise ratio (SINR) at each communication user is higher than a given threshold. Despite the non-convexity of the proposed optimization problem, it can be relaxed into a convex one, which can be solved in polynomial time, and we prove that the relaxation is tight. Then, we propose a reduced complexity design based on zero-forcing the inter-user interference and radar interference. Unlike previous works, which focused on the transmission of communication symbols to synthesize a radar transmit beam pattern, our method provides more degrees of freedom for MIMO radar and is thus able to obtain improved radar performance, as demonstrated in our simulation study. Furthermore, the proposed dual-function scheme approaches the radar performance of the radar-only scheme, i.e., without spectrum sharing, under reasonable communication quality constraints.

Dual‐user joint sensing and communications with time‐divisioned bi‐static radar

Joint Scattering Environment Sensing and Channel Estimation for Integrated Sensing and Communication

A Framework for Co-Existence of Radar and Communication with Joint Design

Joint Bi-Static Radar and Communications Designs for Intelligent Transportation

Joint Design for Co-existence of MIMO Radar and MISO Communication Systems

Joint Multi-User Communication and Sensing Exploiting Both Signal and Environment Sparsity

Joint Transceiver Design for Dual-Functional Full-Duplex Relay Aided Radar-Communication Systems.

Integrated Sensing and Communication Beamforming Design Based on Mutual Information

Joint User Pairing and Beamforming Design for NOMA-Aided CFMM-ISAC Systems

Joint Beamforming Design for Active RIS-Aided THz ISAC Systems with Delay Alignment Modulation.

Joint Transmit and Receive Beamforming Design for Integrated Sensing and Communication

Joint Beamforming Design for Double Active RIS-assisted Radar-Communication Coexistence Systems

Joint Waveform Design for Multi-User Maritime Integrated Sensing and Communication

Joint Transmit Beamforming for Multiuser MIMO Communications and Radar

Multibeam for Joint Communication and Sensing Using Steerable Analog Antenna Arrays

Joint Transmit and Receive Beamforming for Integrated Bistatic Radar Sensing and MU-MIMO Communications

Multibeam Joint Communication and Radar Sensing: Beamforming Design and Interference Cancellation.

Performance Analysis of the Full-Duplex Joint Radar and Communication System.

Joint Radar-Communication Waveform Designs Using Signals From Multiplexed Users

Joint Beamforming and Power Control for D2D-Assisted Integrated Sensing and Communication Networks

Joint Transmit Beamforming for Multiuser MIMO Communication and MIMO Radar