Mengyu Liu,Hong Ren,Cunhua Pan,Boshi Wang,Zhiyuan Yu,Ruisong Weng,Kangda Zhi,Yongchao He
Abstract:Integrated sensing and communication (ISAC) technology has been considered as one of the key candidate technologies in the next-generation wireless communication systems. However, when radar and communication equipment coexist in the same system, i.e. radar-communication coexistence (RCC), the interference from communication systems to radar can be large and cannot be ignored. Recently, reconfigurable intelligent surface (RIS) has been introduced into RCC systems to reduce the interference. However, the "multiplicative fading" effect introduced by passive RIS limits its performance. To tackle this issue, we consider a double active RIS-assisted RCC system, which focuses on the design of the radar's beamforming vector and the active RISs' reflecting coefficient matrices, to maximize the achievable data rate of the communication system. The considered system needs to meet the radar detection constraint and the power budgets at the radar and the RISs. Since the problem is non-convex, we propose an algorithm based on the penalty dual decomposition (PDD) framework. Specifically, we initially introduce auxiliary variables to reformulate the coupled variables into equation constraints and incorporate these constraints into the objective function through the PDD framework. Then, we decouple the equivalent problem into several subproblems by invoking the block coordinate descent (BCD) method. Furthermore, we employ the Lagrange dual method to alternately optimize these subproblems. Simulation results verify the effectiveness of the proposed algorithm. Furthermore, the results also show that under the same power budget, deploying double active RISs in RCC systems can achieve higher data rate than those with single active RIS and double passive RISs.
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is that when radar and communication systems co - exist (RCC), how to maximize the achievable data rate of the communication system by optimizing the radar transmit beamforming vector and the reflection coefficient matrices of two active reconfigurable intelligent surfaces (RIS), while satisfying the radar detection constraints and the power budgets of the radar and RIS. Specifically, the paper proposes a low - complexity algorithm based on the penalty dual decomposition (PDD) framework to address the challenges brought by the strong coupling between variables and the non - convex nature of the objective function and constraints.
### Background and Problem Description of the Paper
With the development of integrated sensing and communication (ISAC) technology, the co - existence of radar and communication systems has become one of the key technologies in the next - generation wireless communication systems. However, in the case of co - existence of radar and communication devices, the influence of interference from the communication system on the radar cannot be ignored. In order to reduce this interference, reconfigurable intelligent surfaces (RIS) have been introduced in recent years. Although passive RIS can relieve the interference problem to a certain extent, its "multiplicative fading" effect limits the performance improvement. Therefore, this paper considers a dual - active - RIS - assisted radar - communication co - existence system, aiming to design the beamforming vector of the radar and the reflection coefficient matrices of the active RIS to maximize the achievable data rate of the communication system.
### Main Contributions
1. **First study of the dual - active - RIS - assisted RCC system**: By optimizing the beamforming vector of the radar and the reflection coefficient matrices of the active RIS, an optimization problem is proposed to maximize the achievable data rate of the communication system under the premise of satisfying the radar detection constraints and the power budgets of the radar and RIS.
2. **Propose a low - complexity algorithm based on the PDD framework**: By introducing auxiliary variables to transform the coupled variables into equality constraints and incorporating them into the objective function, and then using the block coordinate descent (BCD) method to decompose the equivalent problem into multiple sub - problems, and using the Lagrangian dual method to alternately optimize these sub - problems. The dual and penalty parameters are updated in the outer loop, thereby significantly improving the computational speed.
3. **Two - layer algorithm for the benchmark scheme**: Based on the PDD framework, a two - layer algorithm for the dual - passive - RIS - assisted RCC system is derived as a benchmark scheme. For the unit - modulus constraint of the passive RIS, the minimization - maximization (MM) algorithm is used to optimize the phase - shift matrix to reduce the complexity.
4. **Verification by simulation results**: The simulation results show that under the same power budget and the same number of reflection elements, the proposed scheme can achieve a higher data rate with dual - active - RIS than with single - active - RIS and dual - passive - RIS. In addition, the convergence and effectiveness of the algorithm are also verified.
### Mathematical Model and Optimization Problem
#### System Model
- **Radar Model**: The radar mainly detects potential targets in certain directions. Assume that the radar transmits a probing signal \(x[t]\) at time \(t\) and receives the target echo signal at time \(t_0\). The signal of the target direction \(\theta_k\) received by the radar can be expressed as:
\[
y_{r,k}[t]=A_k x[t - t_0]+(H_{1r}\Theta_1 + H_{2r}\Theta_2 H_{12}\Theta_1)n_1[t]+H_{2r}\Theta_2 n_2[t]+n[t]+\sum_{m = 1,m\neq k}^K A_m x[t - t_0]+(h_{br}+H_{1r}\Theta_1 h_{b1}+H_{2r}\Theta_2 h_{b2}+H_{2r}\Theta_2 H_{12}\Theta_1 h_{b1})qP_{\text{act}}c[t]
\]
where \(A_k=\alpha_k a(\theta_k)a^H(\theta_k)\) is the target response matrix, \(\alpha_k\) is the path - loss factor, and \(a(\theta_k)\) is the radar antenna array response vector.
- **Communication Model**: The communication signal from the base station to the user can be expressed as:
\[
y_c[t]=(h_{bu}+h_{2u}^H