Abstract:Asian lacquer is a multi-component material and its manufacturing process is complex, utilizing many materials, techniques, component parts, and specific ingredients. This thesis reports a cross-disciplinary study that investigates the different materials included in the production of historical lacquer from Coromandel and carved lacquer objects in China dating from the 15th to the 18th century. A total of 47 samples were collected from 21 targeted research objects dated to the Ming and Qing periods. Samples were embedded into cross sections and examined by fluorescent light microscopy and scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDS). The stratigraphy of each sample was documented and the inorganic components of grounds, lacquer layers and pigments were identified. The grounds are typically comprised of clay. Pigments include mercuric sulfide, orpiment, malachite, lead white and iron oxide. Most of the inorganic inclusions identified in the overlying lacquer layers may be attributed to dust and contamination from the workshop environment, but lead-rich particles detected in the Coromandel lacquer layers may represent a drying agent used to accelerate the curing. The organic components of the lacquers were identified using pyrolysis gas chromatography-mass spectrometry using tetramethylammonium hydroxide for thermally-assisted hydrolysis and methylation (THM-Py-GC/MS). All three Asian lacquer types – urushi (Chinese, Japanese and Korean lacquer), laccol (Vietnamese lacquer) and thitsi (Thai and Burmese lacquer) - were discovered in the Coromandel objects. Their grounds are typically comprised of blood binder. Both urushi (Toxicodendron vernicifluum) and laccol (Toxicodendron succedaneum) were used in the creation of Chinese carved lacquer. Their ground binders can be either Anacard lacquers or blood. For any one object, the lacquers detected in multiple samples were broadly similar except for Coromandel cabinet 1, which unexpectedly had thitsi lacquer (Gluta usitata) on its panel and urushi lacquer beneath the gilded surface. The data were subjected to principal components analysis to determine any significant groupings. For Coromandel lacquer Group 1 includes objects with a blood ground and a single urushi lacquer application, Group 2 objects have a blood ground with single thitsi and laccol applications and Group 3 objects have a blood ground with three laccol lacquer applications. For carved lacquer samples Group 1 includes objects with lacquer based ground and lacquer coatings, Group 2 blood based ground with urushi coatings and Group 3 blood based ground with laccol applications. A survey of the historical literature has identified references to the materials and technology of lacquer in an extensive range of over one hundred sources, which are considered together for the first time, with new translations by the author for some items. A comparison with the analytical results reveals three main categories: previously established consistencies between written sources and analytical data, the presence of materials which had been anticipated but not previously established, and materials not previously recognized or mentioned in the sources. Examples of the latter include the detection of thitsi lacquer in Coromandel objects, the employment of European smalt in the blue pigmented layer, and the presence of a ground layer rich in vegetal material in carved tixi lacquer. These data show the complexity of Chinese lacquer production and significantly extend our understanding of past manufacturing technologies and material usages of Coromandel and carved lacquers. Not only does this contribute to our appreciation of an important world technological tradition but also can assist the future design of conservation treatment, storage, and display.

Applied analysis of lacquer films based on pyrolysis-gas chromatography/mass spectrometry

Molecular criteria for discriminating museum Asian lacquerware from different vegetal origins by pyrolysis gas chromatography/mass spectrometry

Applying pyrolysis-gas chromatography/mass spectrometry to the identification of oriental lacquers: study of two lacquered shields

Characterization and Quantitation Study of Ancient Lacquer Objects by NIR Spectroscopy and THM-Py-GC/MS

Feasibility Study on Quantitative Analysis of Ancient Lacquer Films by Infrared Spectroscopy

Quantitative Detection of Thitsiol and Urushiol as Markers from the Gluta usitata Lacquer Tree Using HPLC

Effects of Fe Ions, Ultraviolet Irradiation, and Heating on Microscopic Structures of Black Lacquer Films

A Cross-Disciplinary Approach to Chinese Lacquer Technology

Nontargeted Pattern Recognition in the Search for Pyrolysis Gas Chromatography/Mass Spectrometry Resin Markers in Historic Lacquered Objects

Research on the lacquered techniques adopted by the urushiware excavated from the Fangwanggang site in Anhui of West Han Dynasty

Natural Lacquer Was Used As a Coating and an Adhesive 8000 Years Ago, by Early Humans at Kuahuqiao, Determined by ELISA

Nano-emulsification of oriental lacquer sap by ultrasonic wave propagation: Improvement of thin-film characteristics as a natural resin

Ph-Dependent Warping Behaviors of Ancient Lacquer Films Excavated in Shanxi, China

Alteration of Asian lacquer: in-depth insight using a physico-chemical multiscale approach

Characterization and Identification of an Archaeological “lacquer” Pipe

Analysis of Aroma Components of Enzymatic Hydrolysis Products of Oak Lignin from Different Producing Areas

Comprehensive Multi-Analytical Investigations on the Vietnamese lacquered Wall-Panel "The Return of the Hunters" by Jean Dunand

Preparation of Tung Oil-Modified Raw Lacquer Films and Application for Mechanical Carving Technique

Comparative Study of the Materials and Lacquering Techniques of the Lacquer Objects from Warring States Period China

Systematic Investigation into Evolution of Materials and Techniques Used in Lacquer Lian from the Warring States Period to the Yuan Dynasty

Separation of lacquer polysaccharides and interaction with poly-L-lysine