Abstract:The propagation of light from a singlemode fiber (SMF) to a multimode fiber (MMF) arouses a series of eigenmodes, which interference together along the MMF where the positions of the local maximum intensity are the self-imaging points (SIPS). When the light in the MMF propagates to a SMF, the maximum coupling efficiency is obtain when the SMF and MMF connect at a SIP. However the connection generally deviates the SIPs for the accurate connection is difficult to be achieved, which decreases the accuracy of the sensor severely. Herein a novel vibration sensor based on the singlemode multimode singlemode (SMS) fiber is developed, in which the MMF is etched, which turns the SIP to the connection of the MMF and the output SMF accurately. The etched SMS structure dispenses with the requirement of highly accurate connection at a SIP and provides a succedaneous scheme that is sensitive to vibration. The etched sensor responses to the vibration more easily comparing to the un-etched one. Experimental results demonstrate that the sensitivity of the SMS sensor with the both ends etched is respectively over 5 and 40 times as that of the middle etched and un-etched one. When the MMF length decreases from 8 to 2 cm, the vibrating sensitivity of the sensor increases 13.5 times. Experimental results demonstrate that the etched structure with MMF length of 2 cm responses well to the acoustic wave from 20 to 300 Hz, where a pressure sensitivity of 1.49 mV/mPa and linear correlation index of 0.9980 can be attained at 120 Hz. (C) 2018 Elsevier B.V. All rights reserved.

Broadband Acoustic Vibration Sensor Based on Cladding-Mode Resonance of Double-Cladding Fiber

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

Acoustic Frequency Vibration Sensor Based on Tapered SMS Fiber Structure

Cladding-Mode Backward-Recoupling-Based Displacement Sensor Incorporating Fiber Up Taper and Bragg Grating

Vibration Sensor Based on Hollow Biconical Fiber

A double-cladding fiber curvature sensor based on the extrinsic Fabry-Perot interferometer

Acoustic Vibration Sensor Based on Nonadiabatic Tapered Fibers

Cladding Mode Recoupling Based Displacement Sensor By Concatenating Up Taper And Chirped Fiber Bragg Grating

A Multiparameter Sensor Based on Dumbbell-Shaped Double-Cladding Fiber Structure Cascaded Long Period Fiber Grating

Doubly Cladding Single-Mode Optical Fiber Sensors and its Application in Temperature and Humidity Sensing

Broadband Fiber-Optic Acoustic Sensors

Enhanced quasi-distributed accelerometer array based on φ-OTDR and ultra-weak fiber Bragg grating

Optical fiber refractive index sensor based on the double cladding fiber

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

Differential Slope-assisted BOCDA Based on Multicore Fiber for High Sensitivity Radial Vibration Measurement

Fiber-Optic Vibration Sensor Based on Beat Frequency and Frequency-Modulation Demodulation Techniques

Acoustic emission sensing in fiber Bragg grating based on phase demodulation for material health detection

Phase Sensitive Distributed Vibration Sensing Based on Ultraweak Fiber Bragg Grating Array Using Double-Pulse

Cascadable four-core fiber-Bragg gratings accelerometer for 2-dimension low-frequency vibration measurement

Distributed vibration sensor based on mode coupling in weakly coupled few-mode fibers