Abstract:Simulation and analysis of electromagnetic induction heating of continuous conductive fiber-based composite materials is used to (in)validate a series of hypotheses on the physics dominating the heating process. The behavior of carbon fibers with and without surrounding polymer in an alternating electromagnetic field is studied at a microscopic level in ANSYS Maxwell using the solid loss to quantify heat generation in the composite material. To limit the number of elements, the fibers are modeled with a polyhedron cross-section instead of a circular cross-section. In addition, each layer is modeled as an layer of fibers, e.g. 20 fibers placed next to each other. The simulations indicate that samples with fibers oriented in 0 and 90 orientation yield a substantial higher solid loss than fibers oriented in the 0 orientation only. The solid loss in both cases is however not enough to explain the level of heating observed in practice. Filling the volumes between fibers with polymer results in greater solid loss than samples with no polymer between the fibers, at equal fiber volume fraction. Note, no contact between fibers is modeled. The conductivity of the polymer is experimentally determined. The lab tests show relatively low finite resistance values in the transverse direction, indicating that the polymer in a composite should not be considered an isolator. The simulations seem to justify the conclusion that heating of thermoplastic composites in an alternating magnetic field rely on currents through the polymer. Without the polymer and subsequently no polymer conductivity, even if the electrical fields are strong there is almost no heat generated. The carbon fibers are required to be in proximity of each other to create the electrical fields that induce the current through the polymer. The heating is determined by the product of current density squared times the resistivity of the polymer.

Numerical Prediction of Lightning Current Distribution Within Weakly Conductive Polymeric Materials Using the Kirchhoff Paradigm

Design of a Hybrid Carbon Fibre/carbon Nanotube Composite for Enhanced Lightning Strike Resistance

An Efficient Numerical Technique for the Simulation of Charge Transport in Polymeric Dielectrics

Lightning strike-induced dynamic conduction characteristics and damage behavior of carbon fiber-reinforced polymer composites

On the representation of reinforced concrete structures in FDTD-based simulations to compute lightning-induced magnetic fields

Characterisation of the lightning strike damage mechanics onto composite materials and discussion on its numerical modelling techniques: review

The prediction model for resistance of composite interference‐fit joint subjected to current strike

Numerical Simulation of the Negative Downward Leader Current With the Associated Far-EM Field Generated by Lightning

Fast Frequency-Domain Modeling of Return Stroke Including Influence of Lossy Ground

Time-Domain Simulation of Small Thin-Wire Structures Above and Buried in Lossy Ground Using Generalized Modified Mesh Current Method

Efficient Analysis of Electromagnetic Fields Near Lightning Channel by Using SIBC in FDTD

Modeling and simulation of the current quenching behavior of a line lightning protection device

Modified Kirchhoff's Laws for Electric-Double-Layer Charging in Arbitrary Porous Networks

A Time-Domain Multiport Model of Thin-Wire System for Lightning Transient Simulation

Microscopic level modeling of induction welding heating mechanisms in thermoplastic composites

Fast Numerical Evaluation Of The Horizontal Electric Field Radiated By A Lightning Channel Using The Moment Technique

A new dynamic 3D FEM model of arc propagation on cap-and-pin polluted insulator to predict DC flashover voltage

The Development of a Multi-Physics Approach for Modelling the Response of Aerospace Fastener Assemblies to Lightning Attachment

Lightning Damage of Carbon Fiber/Epoxy Laminates with Interlayers Modified by Nickel-Coated Multi-Walled Carbon Nanotubes

Modeling electrochemical systems with weakly imposed Dirichlet boundary conditions

Experimental and Numerical Evaluation of Surge Current Distribution in Buildings During a Direct Lightning Stroke