Abstract:In the decommissioning of nuclear facilities, it is necessary to assess the radioactivity inventory for waste classification and management. For nuclear fusion experiments or accelerator-driven neutron sources, the main contribution to the radiological inventory comes from activation products and tritium. When water is used as coolant of components, it may be activated by neutrons with the consequent production of tritium, and short-lived oxygen and nitrogen isotopes. In most cases several chemical elements may be in solution or suspension in water, because of metallic pipes corrosion when occurring, or functional reasons, e.g. chemical conditioning, addition of antifreeze agent, etc. In this case other activation products could be present and need to be characterized. In this case study, a sample of the coolant of the ENEA Frascati Neutron Generator (FNG) has been radiologically, chemically and physically characterized. In such a facility, during the operation, a beam of deuterons is accelerated up to 300 keV and impacts on a tritiated target for producing 14 MeV neutrons exploiting the fusion reaction T(d,n)α. To avoid overheating in the area around the target, a water-cooling loop is used. After several years of operation, a sample of the fluid has been extracted to undergo a qualitative and quantitative analysis of the radionuclides inventory. Gamma spectrometry has not shown any presence of gamma emitters. On the other hand, Liquid Scintillation Counting (LSC) has provided evidence of the presence of beta emitters. It is known that tritium is expected to occur in the sample because of releases from the tritiated titanium target. This work concerns the development of a method to discriminate the tritium contribution with respect to the total beta activity within the FNG coolant. Since it is known that an unspecified percentage of an unknown anticorrosive agent was added to the water coolant, vacuum distillation has been used to extract purified water (containing only tritium) from the coolant sample leaving any (activated) non-volatile compound in the undistilled fraction. After distillation, any fraction has been investigated by Raman spectroscopy, to determine: a) the chemical composition of the colored anticorrosive agent, b) the efficiency of the separation. Afterwards, both fractions have been analysed by means of LSC, and results showed that the main contribution to sample activity is due to tritium and the activity values are consistent with the theoretical H atomic concentration in both fractions.

A quantitative and comparative study of radionuclidic and chemical impurities in water samples irradiated in a niobium target with Havar vs. niobium-sputtered Havar as entrance foils

Effects of impurity ions upon Cs recycling in a negative hydrogen ion source

Separation of No-Carrier-Added Radioactive Hafnium From Rock Samples

Study of impurity distribution in mechanically polished, chemically treated and high vacuum degassed pure niobium samples using the TOFSIMS technique

Niobium-based sputtered thin films for Corrosion Protection of proton-irradiated liquid water targets for [18F] production

Comparison of Radionuclide Impurities Activated during Irradiation of 18O-Enriched Water in Tantalum and Silver Targets during the Production of 18F in a Cyclotron

Study of impurity distribution in mechanically polished, chemically treated and high vacuum degassed pure Niobium samples using TOFSIMS technique

Pure Beta Emitters in Water Samples from Neutron Irradiation Facilities: Activity Determination Via Vacuum Distillation and Liquid Scintillation Counting

ICRH-related impurity source and control across experiments in H, D, T plasmas at JET-ILW

A search for rare and induced nuclear decays in hafnium

Influence of Nitrogen Pre-Irradiation at Different Temperatures on Surface Blistering and Deuterium Retention in Tungsten

Fundamental Studies of Laser Ablation ICPMS using a Nitrogen Plasma Source and Helium, Argon and Nitrogen as Carrier Gas

Radionuclides in the Cooling Water Systems for the NuMi Beamline and the Antiproton Production Target Station at Fermilab

Thermomechanical Properties of Neutron Irradiated Al3Hf-Al Thermal Neutron Absorber Materials

Effect of Surface Quality on Hydrogen/helium Irradiation Behavior in Tungsten

Helium Irradiation Behavior of Tungsten-Niobium Alloys under Different Ion Energies

Changes of the abundances of Fe, Ni, Zr isotopes due to neutron radiative capture reactions in heavy water reactors

Determination of Deuterium Pick-Up in Zr-Nb Alloy by Hot Vacuum Extraction-Quadrupole Mass Spectrometry

Hydrogen Isotope Exchange Experiments in High Entropy Alloy WMoTaNbV

Irradiation Effects on the Retention of Hydrogen in Al2o3

Magnetic Properties and Hydrides Precipitation Observation of Nitrogen Doping Niobium Used for Accelerator Applications