Abstract:The efficient utilization of solid wastes, such as fly ash and steel slag, has attracted significant attention across the globe. In this paper, these two kinds of waste materials are used to prepare porous sound-absorbing materials, so as to achieve efficient resource utilization and environmental protection, and promote green manufacturing and circular economy. In this study, steel slag and high-alumina fly ash were used as the primary raw materials to prepare green bodies via organic foam impregnation. Subsequently, a high-temperature sintering process was implemented to get the porous sound absorption material product from the green bodies. The effects of several factors, including the ratio of steel slag and fly ash, sintering temperature, and pore structure, on the sound absorption and mechanical properties of the product were investigated. Based on the anorthite region in the CaO–Al2O3–SiO2 ternary phase diagram region, the composition ratio of the material was designed. The composition and microstructure of the material were characterized by X-ray diffraction and scanning electron microscopy. From the results, with the increase of the ratio of fly ash and steel slag, the composition of low melting point substances in the system decreases, and the amount of liquid phase decreases, which weakens the pore blocking phenomenon inside the material, resulting in the increase of pore size and noise reduction coefficient of the material. Besides, higher sintering temperature tends to correlate to greater density and higher compressive and flexural strengths but lower porosity, and the sound absorption coefficient demonstrated a peak with respect to sintering temperature. Furthermore, when the reduction of polyurethane sponge body pore size was taken into account, the product's sound absorption coefficient also showed a peak. The optimal parameters for our porous materials are as follows: fly ash:steel slag = 48 : 25, polyurethane sponge pore size = 40 ppi, sintering temperature = 1160 °C at 1-h duration (bulk density = 573.98 kg/m3), compressive strength = 1 MPa, porosity = 79.35 %, and noise reduction coefficient = 0.47.

Manufacturing and semi-analytical modeling of environment-friendly sound absorbent porous glasses

Finite Element Analysis on Non-Isothermal Glass Molding

Influences of Model’s Shape on Molding Time in Glass Molding Press

Sound absorption performance based on Auxetic microstructure model: a parametric study

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

Improved sound absorption performance of synthetic fiber materials for industrial noise reduction: a review

Research on absorption property of glass hollow sphere porous materials

A Study on Thickness Optimization of Porous Material in Hybrid Sound Absorbing Systems with Pressure-Release Method

A Modified Random Network Model for P2O5–Na2O–Al2O3–SiO2 Glass Studied by Molecular Dynamics Simulations

The Preparation and Characterization of Uniform Nanoporous Structure on Glass

Fabrication, sound absorption simulation and performance optimization of multi‐layer gradient fiber‐based composites

Designing hybrid aerogel-3D printed absorbers for simultaneous low frequency and broadband noise control

Optimization of 3D printed porous materials accounting for manufacturing defects

Effect of sintering condition on the attenuation of silica glasses fabricated by additive manufacturing

Simulation, measurement and optimization of sound absorption in gradient impedance fiber-based composites

Analysis and Optimization of the Noise Reduction Performance of Sound-Absorbing Materials in Complex Environments

Enhancement of the sound absorption of closed-cell mineral foams by perforations: Manufacturing process and model-supported adaptation

Study on the properties of anorthite-based porous sound-absorbing materials prepared by steel slag and fly ash

3D‐Printed Lattice Structures for Sound Absorption: Current Progress, Mechanisms and Models, Structural‐Property Relationships, and Future Outlook

Low-frequency broadband sound absorption of the metastructure with extended tube resonators and porous materials

A comprehensive review of theory and technology of glass molding process