Abstract:Many industrial technologies, such as condensation cooling and fuel cells, require solid-liquid separation. Electrowetting is a very effective method of inducing droplets to detach from hydrophobic surfaces, and it is very convenient to control. The jumping of droplets excited by an electric field depends on the conversion of surface energy into kinetic energy and other forms of energy. At present, there is still a lack of in-depth research on this process. In this study, a high-speed camera is used to capture the jumping motion of a droplet on a hydrophobic surface under the actuation of electrowetting, and the threshold voltage that causes the droplet to detach is estimated based on the changes in contact angle and droplet shape. A self-written Matlab program is used to analyze and calculate the various forms of energy in the process of droplets detaching and subsequent bouncing. The results show that there is an obvious coupling relationship between the kinetic energy and potential energy of the droplet’s center of mass during the flight of the droplet from the surface. The vibrational kinetic energy and surface potential energy also show a certain coupling relationship during the flight phase. The internal dissipation caused by the viscosity of the droplet increases with the droplet oscillation amplitude increasing, and decays with time. Because it can cause the droplet to oscillate and deform and create more surface energy, AC pulses are more efficient than direct current in the droplet bounce. By revealing the energy conversion and dissipation mechanism in the process of droplet jumping driven by electrowetting, a theoretical reference is provided for the application of this technology in solid-liquid separation and three-dimensional digital microfluidics.

Controlling shedding characteristics of condensate drops using electrowetting

Increased droplet coalescence using electrowetting on dielectric (EWOD)

Breath figures under electrowetting: electrically controlled evolution of drop condensation patterns

Regulating droplet impact on a solid hydrophobic surface through alternating current electrowetting-on-dielectric

Deflection of sliding droplets by dielectrophoresis force on a superhydrophobic surface

Bouncing of a droplet on a superhydrophobic surface in AC electrowetting

Actuation and Control of Droplets by Using Electrowetting-on-Dielectric

Contact angle hysteresis and oil film lubrication in electrowetting with two immiscible liquids

Modulation of wetting state switching of droplets on superhydrophobic microstructured surfaces by external electric field

Suppressing the Leidenfrost effect by air discharge assisted electrowetting-on-dielectrics

Orbital Electrowetting-on-Dielectric for Droplet Manipulation on Superhydrophobic Surfaces

Experimental Research on the Transporting,Merging and Oscillation for Electrowetting Droplets on the Dielectric

Electrothermally induced flow in AC EWOD droplet

Energy Conversion During Electrically Actuated Jumping of Droplets

EWOD-aided droplet transport on texture ratchets

Effects of inhomogeneous substrate and molecular orientation on the ac electrowetting behavior of liquid crystal droplet

Electrohydrodynamics of dielectric droplet collision with variant wettability surfaces

Electrowetting on dielectric device with crescent electrodes for reliable and low-voltage droplet manipulation.

Plasma-enhanced Electrowetting-on-dielectrics

Electrowetting-based control of wetting transition of a nanodroplet on pillar-arrayed surfaces

Electrowetting on dielectrics on lubricating fluid based slippery surfaces with negligible hysteresis