Abstract:This paper studies the issue of determination and influence of natural boundary conditions in the problem of buckling of a thin plate with an elliptical inclusion under tension. First, the naturalness of the boundary conditions of the “free edge” type for a plate with a hole is proved. Then a plate with welded inclusion is considered and natural boundary conditions are derived. The limit cases are checked for an absolutely soft inclusion and for an absolutely rigid one. It is shown that the first case leads to a problem with a hole and the corresponding natural boundary conditions, and in the second case, to the absence of natural conditions, since a problem with a clamped edge occurs. The authors conclude that the use of additional restrictions will lead to the construction of a basis that will rapid up the convergence of the method. Variational methods are widely used in all fields of mechanics, including in the field of machine, aircraft, and rocket engineering. An exact solution to the problems of elasticity theory and structural mechanics is not always possible to construct, therefore, in practice, great importance is attached to various approximate methods. Among them a special place is occupied by variational methods based on the direct minimization of the corresponding energy of the body and making it possible to build approximate analytical solutions in the form of a functional series. The goal of variational methods is to construct a partial sum of this series, which, with a sufficient number of terms, will be maximum close to the solution. However, the issue of convergence is influenced by many factors, and one of them is the natural boundary conditions, which are derived in this paper for the problem of the stability loss of the plate with the elliptical inclusion under tension.

Optimal stability in the identification of a rigid inclusion in an isotropic Kirchhoff-Love plate

Stable determination of an inclusion in an elastic body by boundary measurements (unabridged)

Isotropic Laminated Plate Containing a Coated Rigid Elliptical Inclusion Subjected to a Rotational Moment with Constant Interfacial and Hoop Stress Resultants

Stable determination of an inclusion in an inhomogeneous elastic body by boundary measurements

Inverse Problem for Kirchhoff-Love Plate Equation

An Arbitrarily Shaped Inclusion with Uniform Eigencurvatures in an Infinite Plate, Semi-Infinite Plate, Two Bonded Semi-Infinite Plates or a Circular Plate

Stress concentration near stiff inclusions: Validation of rigid inclusion model and boundary layers by means of photoelasticity

On form invariance of the Kirchhoff-Love plate equation

Optimal design of elastic plates

A Blake-Zisserman-Kirchhoff theory for plates with soft inclusions

Optimal three spheres inequality at the boundary for the Kirchhoff-Love plate's equation with Dirichlet conditions

Global Existence and Exponential Stability for a Nonlinear Thermoelastic Kirchhoff-Love Plate

ON NATURAL BOUNDARY CONDITIONS IN THE STABILITY LOSS PROBLEM OF A PLATE WITH AN ELLIPTICAL INCLUSION UNDER TENSION

Coated Inhomogeneities of Arbitrary Shape with Internal Uniform Hydrostatic Stress Resultants in Isotropic Laminated Plates

Three-phase elliptical inclusions with internal uniform hydrostatic stress resultants in isotropic laminated plates

Multiple Rigid Line Inclusions (Anti-Cracks) in a Multilayered Orthotropic Medium under Anti-Plane Loading

Multiphase Circular Inhomogeneities in Isotropic Laminated Plates

An Inclusion of Arbitrary Shape in an Infinite or Semi-Infinite Isotropic Multilayered Plate

Multiple Elastic or Rigid Line Inclusions in a Multilayered Orthotropic Solid

Axisymmetric Indentation of Circular Rigid Plate on Layered Elastic Halfspace with Transverse Isotropy

Elastic Harmonic Inhomogeneity Near a Concentrated Rotational Moment in Isotropic Laminated Plates