Abstract:A new, simple method is presented for deriving the instability potential of thin plates, based on the equilibrium conditions and constitutive law for incremental forces considering the geometric nonlinear effect. First, the equations of equilibrium are established for the plate at the last calculated C1 and current deformed C2 states, from which the equilibrium equations for the incremental forces at C2 are derived. Then, the incremental forces are derived as the summation of two parts: (1) the part from the increase of the Cauchy stresses at C1 to the 2nd Piola-Kirchhoff stresses at C2, which are related to the strain increments and derivable from the linear constitutive; and (2) the part by the difference between the 2nd Piola-Kirchhoff and 1st Piola-Kirchhoff stresses, which are related to the cross-sectional forces at C1 and rigid displacements. Based on the previous concept, the rigid body rule and coordinate indifference of tensor expressions, the constitutive law for incremental forces including the geometric nonlinear effect is derived. Further, by the variational principle, the following instability potentials are derived: δUGB caused by the balance conditions for initial forces, δUGC caused by the constitutive law for incremental forces, and δUGR caused by the rotation of boundary moments. Consequently, the total instability potential is presented for the plate in the virtual work form. The present approach is self-explanatory, which requires only simple integration operations. Moreover, the two essential conditions are satisfied: equilibrium conditions for incremental forces and rigid body rule. Numerical examples are presented to demonstrate the rationality of the present plate theory compared with the conventional one.

A qualified plate theory for rigid rotation in postcritical nonlinear analysis

A rigid-body-qualified plate theory for the nonlinear analysis of structures involving torsional actions

A New Approach for Deriving the Instability Potential for Plates Based on Rigid Body and Force Equilibrium Considerations

A COMPLETE STABILITY THEORY FOR THE KIRCHHOFF THIN PLATE UNDER ALL KINDS OF ACTIONS

A New Refined Plate Theory with Isogeometric Approach for the Static and Buckling Analysis of Functionally Graded Plates

STUDY ON HIGHER-ORDER SHEAR DEFORMATION THEORIES OF THICK-PLATE

Symmetric and asymmetric thermo-induced buckling and postbuckling of rotating GPLRC annular plates rested on elastic foundation

Rigid body concept for geometric nonlinear analysis of 3D frames, plates and shells based on the updated Lagrangian formulation

Dynamic Behavior and Buckling Analysis of Thin Rectangular Plate Rotating Around Its Symmetrical Axis

Finite deformation plate theory and large rigid-body motions

A Simple Nonlinear Triangular Plate Element And Strategies Of Computation For Nonlinear Analysis

Nonlinear axisymmetric bending analysis of strain gradient thin circular plate

A novel technique for nonlinear dynamic instability analysis of FG-GRC laminated plates

A Thickness-Torsion-locking First-Order Shear Plate Theory for Analyzing Bending and Free Vibration of Rectangular Plates

Rigid Body Considerations For Geometric Nonlinear Analysis Of Structures Based On The Updated Lagrangian Formulation

A Homogenization-Based Laminated Plate Theory

Non-axisymmetric Instability of Polar Orthotropic Annular Plates

Static Analysis of FG Plates Using T-splines Based Isogeometric Approach and a Refined Plate Theory

Nonlinear Bending of Size-Dependent Circular Microplates Based on the Modified Couple Stress Theory

Nonlinear Theory of Classical Cylindrical Richtmyer-Meshkov Instability for Arbitrary Atwood Numbers

On a consistent finite-strain plate theory based on 3-D energy principle