Abstract:Radar systems are a type of sensor that detects radio signals reflected from objects located a long distance from transmitters. For covering a longer range and a higher resolution in the operation of a radar, a high-frequency band and an array antenna are measures to take. Given a limited size to the antenna aperture in the front end of the radar, the choice of a millimeter-wave band leads to a denser layout for the array antenna and a higher antenna gain. Millimeter-wave signals tend to become attenuated faster by a larger loss of the covering material like the radome, implying this disadvantage offsets the advantage of high antenna directivity, compared to the C-band and X-band ones. As the radome is essential to the radar system to protect the array antenna from rain and dust, a metamaterial surface in the layer is suggested to meet multiple objectives. Firstly, the proposed electromagnetic structure is the protection layer for the source of radiation. Secondly, the metasurface does not disturb the millimeter-wave signal and makes its way through the cover layer to the air. This electromagnetically transparent surface transforms the phase distribution of the incident wave into the equal phase in the transmitted wave, resulting in an increased antenna gain. This is fabricated and assembled with the array antenna held in a 3D-printed jig with harnessing accessories. It is examined in view of S21 as the transfer coefficient between two ports of the VNA, having the antenna alone and with the metasurface. Additionally, the far-field test comes next to check the validity of the suggested structure and design. The bench test shows around a 7 dB increase in the transfer coefficient, and the anechoic chamber field test gives about a 5 dB improvement in antenna gain for a 24-band GHz array antenna.

Digitized metamaterial absorber-based compressive reflector antenna for high sensing capacity imaging

A 144GHz 0.76cm-resolution sub-carrier SAR phase radar for 3D imaging in 65nm CMOS.

Asymmetric Three-Dimensional Metamaterial Absorber for Microwave Application

A Miniaturized Perfect Metamaterial Absorber for EMI Radiation Suppression

A Metamaterial Surface Avoiding Loss from the Radome for a Millimeter-Wave Signal-Sensing Array Antenna

A Broadband and Compact Millimeter-Wave Imaging System based on Synthetic Aperture Radar

Compressive and Adaptive Millimeter-wave SAR

Single-Frequency Microwave Imaging with Dynamic Metasurface Apertures

High-performance dendritic metamaterial absorber for broadband and near-meter wave radar

3D Imaging Method Based on Digital Coding Metasurface With Unknown Mutual Coupling

Consensus and Sectioning-based ADMM with Norm-1 Regularization for Imaging with a Compressive Reflector Antenna

Assessment of Compressive Sensing 2 × 2 MIMO Antenna Design for Millimeter-Wave Radar Image Enhancement

Multifunctional Metamaterial with Reconfigurable Electromagnetic Scattering Properties for Advanced Stealth and Adaptive Applications

Design and Experimental Performance Evaluation of a Single-Layer Polarization-Insensitive Asymmetric Microwave Metasurface Absorber

On the Use of an In-Package Dielectric Lens Antenna for Radar-Based Applications

Broadband Radar Cross Section Reduction by an Absorptive Metasurface Based on a Magnetic Absorbing Material.

Ultra-thin wideband frequency tunable metamaterial absorber and its application for antenna radar cross section reduction

Compact Wearable Antenna with Metasurface for Millimeter-Wave Radar Applications

Precise 2D and 3D Fluoroscopic Imaging by Using an FMCW Millimeter-Wave Radar

Experimental Synthetic Aperture Radar With Dynamic Metasurfaces

Fast High-Quality Enhanced Imaging Algorithm for Layered Dielectric Targets Based on MMW MIMO-SAR System