Abstract:A Si(220) double-crystal monochromator for the energy range 10–30 keV is presented. It will be used for EXAFS as well as powder diffraction measurements. To determine the requirements for this monochromator we looked, apart from mean considerations, at the requirements dictated by EXAFS in transmission mode. For good data analyses the proper shape, amplitude, and location at the energy axis of each wiggle is required. Moreover it is essential to separate the wiggles from background and noise. For the latter a high flux through the sample is desirable, which can be achieved by horizontal focusing of the beam. For that we have chosen to bend the second crystal sagitally. The sagittal bending radius is adjustable between 50 and 0.8 m, because for different energies different sagittal radii are necessary to focus the beam on the sample. The mean meridional radius of the second crystal is fixed at 130 m, which is an optimization for 20 keV. The meridional radius of the first crystal can be tuned between 100 and 500 m. When this radius is set to 130 m the energy resolution is calculated to be 6, 3, and 35 eV for 10, 20, and 30 keV (for perfectly bent crystals). By changing the meridional radius of the first crystal, future users of this monochromator can make the trade off between resolution and intensity. Movement of the monochromator exit beam, during a scan, will occur due to the monochromator geometry, but is reduced as much as possible by using an asymmetrically cut second crystal, with an asymmetry angle of 2.5°. The average exit beam movement of the monochromator for a 1-keV scan is 20 μm. For 40% of the energy range (10–30 keV) the exit beam position remains within 10 μm. For the second crystal no translation stage is used. When using a translation stage it is difficult to keep the change in flux within acceptable limits, because an alignment error of 0.01 arcsec at 30 keV will result in a change in intensity of 1%.

Performance of CVD Diamond Single Crystals as Side-bounce Monochromators in the Laue Geometry at High Photon Energies

Diamond Channel-Cut Crystals for High-Heat-Load, Beam-Multiplexing, Narrow-Band X-ray Monochromators

Large-surface-area diamond (111) crystal plates for applications in high-heat-load wavefront-preserving x-ray crystal optics

Recent advances in high-growth rate single-crystal CVD diamond

Planar channeling of 855 MeV electrons in a boron-doped (110) diamond undulator -- a case study

Single Crystal Diamond Refractive Lens for Focusing of X-rays in Two Dimensions

A Focusing System for X-ray Diffraction Studies of Materials under High Pressure in the Diamond Cell

High-order stimulated Raman scattering in CVD single crystal diamond

Femtosecond Laser Ablation for Manufacturing of X-ray Lenses and Phase Corrector Plates

High-dynamic-range transmission-mode detection of synchrotron radiation using X-ray excited optical luminescence in diamond

A dynamic focusing x‐ray monochromator for a wiggler beam line at the SRS of the SERC Daresbury Laboratory (abstract)

Large Area Single-Crystal Diamond Synthesis by 915 MHz Microwave Plasma-Assisted Chemical Vapor Deposition

High-Resolution Monochromator Using A High-Efficiency Single-Mode X-Ray Resonator at Laue Incidence

An X-ray beam profile monitoring system at a beamline front-end combining a single-crystal diamond film and energy discrimination using droplet analysis

Recent Advances in Diamond Detectors

Double-edge scan wavefront metrology and its application in crystal diffraction wavefront measurements

Very high growth rate chemical vapor deposition of single-crystal diamond.

A direct experimental comparison of single-crystal CVD diamond and silicon carbide X-ray beam position monitors

The Clinical Significance of Posterior Insular Volume in Adolescent Anorexia Nervosa

Control of surface and bulk crystalline quality in single crystal diamond grown by chemical vapour deposition

High-current electron emission characteristics of cathodes based on diamond films