Abstract:This work presents the development and characterization of a process for manufacturing test specimens using thermoplastic polyurethane (TPU) on paper substrates, which serve as elastomeric substrates for the manufacturing of piezoresistive sensor devices using the Graphite on Paper (GoP) technique. The study of piezoresistive sensor elements is based on their behavior in response to physical stimuli such as mechanical stress or compression, resulting in variations in electrical resistance obtained from the deposition of graphite films on paper, combined with the elastomer. By leveraging the piezoresistive effect of graphite, innovative technological solutions are sought, enabling the creation of different types of sensors for measuring and monitoring a wide range of physical quantities. The proposed process utilizes commonly available materials in the market and offers a low-cost alternative compared to traditional techniques used for semiconductor-based devices. To create the test specimens, a perforated matrix made of polylactic acid (PLA) was produced using 3D printing, with dimensions specified in ISO 1924-2/2008, and a thickness limitation of 2 mm. TPU is deposited into the perforated grooves of the developed matrix on the paper substrate, filling the spaces intended for the addition of the elastomeric polymer. The deposition process is carried out similar to silk-screen printing, ensuring uniform thickness of the test specimens. The curing process takes place over a period of 48 h at room temperature under the weight of granite structures covered with PVC sheets. After curing, the test specimens are demolded. The obtained results consist of TPU + Paper strips with an average thickness of approximately 2.1357 mm, with a mean thickness variation of 0.10688 mm, representing an average variation of 4.947 % among the strips. By disregarding the highest and lowest results from the measurement series, samples with an average thickness of 2.1327 mm and variations of 0.09250 mm were obtained, representing an average thickness variation of 4.328 %. These results are promising for the development of flexible sensor devices for applications in industrial equipment, soft robotic systems, healthcare, and bioengineering fields.

Testing the influence of the temperature, RH and filler type and content on the Universal Power Law for new reduced graphene oxide TPU composites

Morphology, Mechanical and Thermal Properties of Thermoplastic Polyurethane Containing Reduced Graphene Oxide and Graphene Nanoplatelets

Preparation of Functionalized Graphene/thermal Conductive Polyurethane Films

Preparation and Piezoresistive Properties Study of Conductive Graphene/Thermoplastic Polyurethane Composites

Influence of Characteristics of Thermoplastic Polyurethane on Graphene-Thermoplastic Polyurethane Composite Film

Synergistic Effects of Hybrid Carbonaceous Fillers of Carbon Fibers and Reduced Graphene Oxides on Enhanced Heat-Dissipation Capability of Polymer Composites

Combustion Behavior and Thermal Stability of TPU Composites Based on Layered Yttrium Hydroxides and Graphene Oxide

Deposition and evaluation of thermoplastic polyurethane on paper substrate for test specimen production

Enhancing Thermal Conductivity and Mechanical Strength of TPU Composites Through Modulating O-Pda-bn/rgo Heterointerface Networks

A Micromechanics Model to Predict Effective Thermal Conductivity of Rgo/mmt/polymer Composites

Thermal Conductivities of PU Composites with Graphene Aerogels Reduced by Different Methods

RGO/TPU Composite with a Segregated Structure As Thermal Interface Material

Insight into Effect of Hydrothermal Preparation Process of Nanofillers on Dielectric, Creep and Electromechanical Performance of Polyurethane Dielectric Elastomer/reduced Graphene Oxide Composites

In situ thermally reduced graphene oxide/epoxy composites: thermal and mechanical properties

Electric Heating Behavior of Reduced Oxide Graphene/Carbon Nanotube/Natural Rubber Composites with Macro-Porous Structure and Segregated Filler Network

Morphology and Properties of Shape Memory Thermoplastic Polyurethane Composites Incorporating Graphene-Montmorillonite Hybrids

Correlation between microstructure and properties of graphene oxide/waterborne polyurethane composites investigated by positron annihilation spectroscopy

Preparation, Characterization and Tribological Performance of Polyurethane (PU) Coatings Filled with Graphene Oxide (GO)

An Infiltration Method to Synthesize Thermoplastic Polyurethane Composites Based on Size-Controlled Graphene Foams

Temperature and shear dependence of rheological behavior for thermoplastic polyurethane nanocomposites with carbon nanofillers

A Study on Synthesis of Polyurethane/Functionalized Graphene Nanocomposites by In-situ Intercalation Method