An Electromagnet-Based Magnetically-Activated Thermal Switch Without Moving Parts

C. Rodrigues,M. M. Dias,L. Martins,J. P. Araujo,J. C.R.E Oliveira,A. M. Pereira,J. Ventura

DOI: https://doi.org/10.48550/arXiv.1803.10490

2018-03-28

Abstract:With the ever increasing power dissipation in electrical devices, new thermal management solutions are in high demand to maintain an optimal operating temperature and efficient performance. In particular, recently developed magnetically-activated thermal switches (MATSs) provide an alternative to existing devices, using the magnetic and thermal properties of superparamagnetic nanofluids to dissipate heat in a controlled manner. However, the presence of moving parts is a major drawback in those systems that must still be addressed. Herein, we present a compact and automatized MATS composed by an encapsulated superparamagnetic nanofluid and an electromagnet allowing to activate the MATS without any moving part. We investigate the effect of different temperature gradients (40, 26 and 10 C) and powers applied to the coil (6.5, 15, 25 and 39 W) on the performance of this novel MATS. The results show that the highest (44.4$) and fastest (0.6 C/s) temperature variation occur for the highest studied temperature gradient. On the other hand, with increasing power, there is also an increase in the efficiency of the heat exchange process between the two surfaces. These results remove one of the main barriers preventing the actual application of magnetic thermal switches and opens new venues for the design of efficient thermal management devices.

Applied Physics,Mesoscale and Nanoscale Physics

What problem does this paper attempt to address?

This paper attempts to address the increasing thermal management demands caused by the rising power dissipation in electrical equipment. Specifically, the paper proposes a magnetically activated thermal switch (MATS) without moving parts to overcome the main drawbacks associated with moving parts in existing magnetic thermal switches. This novel MATS achieves thermal management by using encapsulated superparamagnetic nanofluids and electromagnets, thereby controlling heat transfer without any mechanical moving parts.

### Main Research Objectives:
1. **Design a MATS without moving parts**: Design a compact and automated magnetic thermal switch using electromagnets and encapsulated superparamagnetic nanofluids.
2. **Evaluate the impact of different temperature gradients and power on MATS performance**: Study the effects of different temperature gradients (40°C, 26°C, and 10°C) and different power levels (6.5W, 15W, 25W, and 39W) on the performance of MATS.
3. **Improve heat exchange efficiency**: Enhance the efficiency of the heat exchange process by optimizing the magnetic field frequency and power, thereby reducing the temperature gradient.

### Research Background:
With the continuous increase in power dissipation in electrical equipment, efficient thermal management solutions have become particularly important. Although existing magnetic thermal switches can control heat transfer through the magnetic and thermal properties of superparamagnetic nanofluids, the presence of moving parts limits their widespread use in practical applications. Therefore, developing a MATS without moving parts is of significant importance.

### Experimental Methods:
- **Experimental Setup**: A cubic container made of polymethyl methacrylate (PMMA) filled with superparamagnetic nanofluids and sealed with copper plates is used. The bottom of the container is heated by a Peltier element, while the top is kept at room temperature, creating a controllable temperature gradient.
- **Electromagnets**: The magnetization and demagnetization of the electromagnets are controlled by current pulses, causing the nanofluids to move between the heat source and the cold end.
- **Data Acquisition**: Thermocouples are used to record the temperature changes at the hot and cold ends, and data is collected through a LabView program.

### Experimental Results:
- **Temperature Gradient Changes**: At the highest temperature gradient (40°C), the temperature change is the largest (44.4%) and the change rate is the fastest (0.6°C/s).
- **Power Impact**: As the power increases, the heat exchange efficiency also improves, and the temperature gradient gradually decreases.
- **Frequency Impact**: In the frequency range of 5 to 10 Hz, the temperature gradient change is the largest, and further increasing the frequency leads to a reduction in the temperature gradient change.

### Conclusion:
The paper successfully designed and tested a MATS without moving parts, significantly improving heat exchange efficiency by optimizing the magnetic field frequency and power. This novel MATS offers new possibilities for future thermal management applications, especially in scenarios requiring high reliability and no mechanical wear.