Effect of Vacancies on the Mechanical Properties of Phosphorene Nanotubes

V. Sorkin,Y.W. Zhang

DOI: https://doi.org/10.1088/1361-6528/aab749

2018-03-09

Abstract:Using density functional tight-binding method, we studied the mechanical properties, deformation and failure of armchair (AC) and zigzag (ZZ) phosphorene nanotubes (PNTs) with monovacancies and divacancies subjected to uniaxial tensile strain.

Materials Science

What problem does this paper attempt to address?

Vacancy migrations in carbon nanotubes.

Chuanhong Jin,Kazu Suenaga,Sumio Iijima

DOI: https://doi.org/10.1021/nl0732676

IF: 10.8

2008-01-01

Nano Letters

Abstract:Activities of vacancy defects in carbon nanotubes have been directly monitored by in situ high-resolution transmission electron microscopy at elevated temperatures. Adatom-vacancy pair defects are first prolific due to the knock-on damage, and then the induced vacancies indeed grow up to 1-2 nm in the size by the following Joule heating. Surprisingly, these large vacancies, or "holes", tend to migrate and coalesce with each other to form even larger ones. It suggests that the activation barrier has been substantially lowered due to the contributions of an electromigration and/or irradiation effect.
Mechanical Properties of Pristine and Defective Carbon-Phosphide Monolayers: A Density Functional Tight-Binding Study

V. Sorkin,Y.W. Zhang

DOI: https://doi.org/10.1088/1361-6528/aad9e8

2018-08-01

Abstract:Using density functional tight-binding theory, we investigated the elastic properties and deformation and failure behaviors of pristine and defective carbon-phosphide (CP) monolayers subjected to uniform uniaxial tensile strain along armchair (AC) and zigzag (ZZ) directions. Two variants of carbon phosphide were studied and two types of carbon and phosphorous vacancies (single and double) were considered. It was found that carbon monovacancies have the lowest formation energy, while phosphorous divacancies have the highest one in both CP allotropes. A strong mechanical anisotropy for carbon phosphide was found with the Youngś modulus and the failure stress along ZZ direction being an order of magnitude larger than those along AC direction. In both allotropes, the Youngs modulus, failure stress and strain are considerably affected by vacancies, especially along AC direction. Fracture of pristine CP monolayer occurred via the rupture of phosphorous-phosphorous bonds when CP monolayer is stretched along AC direction, while via the rupture of carbon-phosphorous bonds when stretched along ZZ direction. The failure strain and stress along the AC direction are affected only by phosphorous vacancies, while along the ZZ direction, they are almost equally affected by both phosphorous and carbon vacancies. These understandings may provide useful guidelines for potential applications of CP monolayers in nanoelectromechanical systems.

Materials Science
Numerical Exploration Of The Defect'S Effect On Mechanical Properties Of Nanowires Under Torsion

H. F. Zhan,Y. T. Gu,C. Yan,P. K. D. V. Yarlagadda

DOI: https://doi.org/10.4028/www.scientific.net/AMR.335-336.498

2011-01-01

Abstract:Molecular dynamics (MD) simulations have been carried out to investigate the defect's effect on the mechanical properties of single-crystal copper nanowire with different surface defects, under torsion deformation. The torsional rigidity is found insensitive to the surface defects and the critical angle appears an obvious decrease due to the surface defects, the largest decrease is found for the nanowire with surface horizon defect. The deformation mechanism appears different degrees of influence due to surface defects. The surface defects play a role of dislocation sources. Comparing with single intrinsic stacking faults formation for the perfect nanowire, much affluent deformation processes have been activated because of surface defects, for instance, we find the twins formation for the nanowire with a surface 45 degrees defect.
First-principles Study for Transport Properties of Armchair Carbon Nanotubes with a Double Vacancy under Strain

Zi Li,Chong-Yu Wang,Xu Zhang,San-Huang Ke,Weitao Yang

DOI: https://doi.org/10.1063/1.2939279

IF: 2.877

2008-01-01

Journal of Applied Physics

Abstract:Vacancies are one of the most important defects in carbon nanotubes (CNTs). Vacancies could affect the mechanical, chemical, and electronic properties of CNTs. In this study, we first use first-principles plane-wave calculation to optimize the structure of single-walled CNTs with a double vacancy under 0%, 3%, and 6% strains, respectively. Then, we use the single-particle Green function method to calculate their transport properties. It is found that different strains cause different local structures near the defect, which change the transmission function around the Fermi energy, and the conductance tends to be maximized under ∼3% strain.
Atomic vacancies significantly degrade the mechanical properties of phosphorene.

Zhen-Dong Sha,Qing-Xiang Pei,Ying-Yan Zhang,Yong-Wei Zhang

DOI: https://doi.org/10.1088/0957-4484/27/31/315704

IF: 3.5

2016-01-01

Nanotechnology

Abstract:Due to low formation energies, it is very easy to create atomic defects in phosphorene during its fabrication process. How these atomic defects affect its mechanical behavior, however, remain unknown. Here, we report on a systematic study of the effect of atomic vacancies on the mechanical properties and failure behavior of phosphorene using molecular dynamics simulations. It is found that atomic vacancies induce local stress concentration and cause early bond-breaking, leading to a significant degradation of the mechanical properties of the material. More specifically, a 2% concentration of randomly distributed mono-vacancies is able to reduce the fracture strength by similar to 40%. An increase in temperature from 10 to 400 K can further deteriorate the fracture strength by similar to 60%. The fracture strength of defective phosphorene is also found to be affected by defect distribution. When the defects are patterned in a line, the reduction in fracture strength greatly depends on the tilt angle and the loading direction. Furthermore, we find that di-vacancies cause an even larger reduction in fracture strength than mono-vacancies when the loading is in an armchair direction. These findings provide important guidelines for the structural design of phosphorene in future applications.
Effects of Vacancies on Interwall Spacings of Multi-Walled Carbon Nanotubes

Ming-du Ma,Jefferson Zhe Liu,Li-feng Wang,Lu-ming Shen,Quan-shui Zheng

DOI: https://doi.org/10.1631/jzus.a1000174

2010-01-01

Abstract:We use molecular dynamics (MD) simulations to study the effects of vacancies on tube diameters and interwall spacings of multi-walled carbon nanotubes (MWCNTs). Two types of vacancies, double vacancy and three dangling-bond (3DB) single vacancy, are identified to have opposite effects on the tube size change, which explains the inconsistency of the experimentally measured interwall spacings of MWCNTs after electron beam irradiation. A theoretical model to quantitatively predict the shrunk structures of the irradiated MWCNTs is further developed. We also discuss the fabrications of prestressed MWCNTs, in which reduced interwall spacings are desired to enhance the overall elastic modulus and strength.
Effects of atomic vacancy defects and their evolution mechanisms on the fracture of carbon nanotubes

YaLei Wang,JianQiu Zhou,Lei Cui,Xiaohan Liu,Xiaocong Tang

DOI: https://doi.org/10.1007/s10853-024-09495-7

IF: 4.5

2024-03-07

Journal of Materials Science

Abstract:CNTs produced by traditional physical and chemical methods inevitably have some defects. The existence of defects has a great impact on the physical, chemical and mechanical properties of CNTs. This article presents a method for evaluating the influence of vacancy defects on the fracture mechanism of carbon nanotubes using the C–C bond fracture criterion. The objective of this approach is to develop a finite element model of carbon nanotubes that includes atomic vacancy defects, allowing for the analysis of the evolution of these defects into dislocations. Specifically, this study utilizes a finite element model to simulate the fracture behavior of carbon nanotubes. Additionally, X-ray diffractometer and Raman spectrometer techniques are employed to characterize and analyze complete carbon nanotubes with atomic vacancies and defects throughout the evolution process. The findings indicate that vacancy defects significantly reduce the tensile strength and ultimate strain of Carbon nanotubes, with reductions of approximately 20–30% and 12–18% in tensile strength and final strain, respectively. The diffraction and Raman spectra uncover the evolution mechanism of carbon nanotubes from point defects to dislocation until fracture, and further demonstrate the substantial decrease in their mechanical properties resulting from stress concentration.

materials science, multidisciplinary
First-Principles Study of the Defected Phosphorene under Tensile Strain

Feng Hao,Xi Chen

DOI: https://doi.org/10.1063/1.4966167

IF: 2.877

2016-01-01

Journal of Applied Physics

Abstract:By using first-principles calculations, we investigate the defected phosphorene with vacancies under tensile conditions, specifically focusing on its stress-strain relation, band gap, and Li diffusion through the double vacancy. The analysis of the stress-strain relation indicates that, owing to the presence of vacancies, the mechanical properties of phosphorene are significantly degraded in the zigzag direction, including the ideal strength and Young's modulus. Moreover, it is found that tensile strain produces a remarkable reduction in the band gap of the defected phosphorene, and Li diffusion through the defected phosphorene is more energetically favorable compared with the pristine phosphorene, which can be further enhanced under biaxial tension. Published by AIP Publishing.
A Computational Study of the Electronic Properties of One-Dimensional Armchair Phosphorene Nanotubes

Sheng Yu,Hao Zhu,Kwesi Eshun,Abbas Arab,Ahmad Badwan,Qiliang Li

DOI: https://doi.org/10.1063/1.4934852

IF: 2.877

2015-01-01

Journal of Applied Physics

Abstract:We have performed a comprehensive first-principle computational study of the electronic properties of one-dimensional phosphorene nanotubes (PNTs), and the strain effect on the mechanical and electrical properties of PNTs, including the elastic modulus, energy bandstructure, and carrier effective mass. The study has demonstrated that the armchair PNTs have semiconducting properties along the axial direction and the carrier mobility can be significantly improved by compressive strain. The hole mobility increases from 40.7 cm2/V s to 197.0 cm2/V s as the compressive strain increases to −5% at room temperature. The investigations of size effect on armchair PNTs indicated that the conductance increases significantly as the increasing diameter. Overall, this study indicated that the PNTs have very attractive electronic properties for future application in nanomaterials and devices.
Highly Itinerant Atomic Vacancies in Phosphorene

Yongqing Cai,Qingqing Ke,Gang Zhang,Boris I. Yakobson,Yong-Wei Zhang

DOI: https://doi.org/10.1021/jacs.6b04926

IF: 15

2016-01-01

Journal of the American Chemical Society

Abstract:Using detailed first-principles calculations, we investigate the hopping rate of vacancies in phosphorene, an emerging elemental 2D material besides graphene. Our work predicts that a direct observation of these monovacancies (MVs), showing a highly mobile and anisotropic motion, is possible only at low temperatures around 70 K or below where the thermal activity is greatly suppressed. At room temperature, the motion of a MV is 16 orders faster than that in graphene, because of the low diffusion barrier of 0.3 eV. Built-in strain associated with the vacancies extends far along the zigzag direction while attenuating rapidly along the armchair direction. We reveal new features of the motion of divacancies (DVs) in phosphorene via multiple dissociation-recombination processes of vacancies owing to a small energy cost of similar to 4.05 eV for the splitting of a DV into two MVs. Furthermore, we find that uniaidal tensile strain along the zigzag direction can promote the motion of MVs, while the tensile strain along the armchair direction has the opposite effect. These itinerant features of vacancies, rooted in the unique puckering structure facilitating bond reorganization, enable phosphorene to be a bright new opportunity to broaden the knowledge of the evolution of vacancies, and a proper control of the exceedingly active and anisotropic movement of the vacancies should be critical for applications based on phosphorene.
Tension-Induced Phase Transformation and Anomalous Poisson Effect in Violet Phosphorene

Penghua Ying,Xiaowen Li,Xiaobin Qiang,Yao Du,Jin Zhang,Lang Chen,Zheng Zhong

DOI: https://doi.org/10.1016/j.mtphys.2022.100755

IF: 11.021

2022-01-01

Materials Today Physics

Abstract:Two-dimensional violet phosphorene (VP) nanosheets are promising semiconductor materials with unique cross structures distinct from those of their allotropes such as black phosphorene and blue phosphorene, but their mechanical behaviors remain almost unexplored. By using the first-principles calculations, in this paper we investigate the mechanical behaviors of monolayer, bilayer, and bulk VP under uniaxial tension. A phase transformation from the open-pore phase to closed-pore phase is observed in VP structures when under a specific tensile strain. It is revealed that the phase transformation is attributed to the competition between the rotation and elongation of sub-nano rods in VP structures during the loading process. Due to the phase transformation, the in-plane Poissons ratio of monolayer VP can become greater than 1.2, while the bulk VP possesses a negative out-of-plane Poissons ratio with a magnitude up to -0.3 at a certain strain. These results indicate that Poisson effects in VP are superior to those in any other existing two-dimensional materials. In addition, based on the tensor analysis of elastic constants, a strong mechanical anisotropy is observed in VP structures both before and after the phase transformation. Besides the mechanical properties, the band gap of all VP structures decreases as the applied tensile strain increases, which can eventually transform into the metallic state prior to their fracture. The combination of unique phase transformation, anomalous Poisson effect, strong mechanical anisotropy and tunable electronic properties render VP be a novel nanoscale metamaterial with multifunctional applications.
Influence of structural defect on thermal–mechanical properties of phosphorene sheets

Wen-Hwa Chen,I-Chu Chen,Hsien-Chie Cheng,Ching-Feng Yu

DOI: https://doi.org/10.1007/s10853-016-0611-3

IF: 4.5

2016-11-22

Journal of Materials Science

Abstract:Since the exciting discovery of graphene, there has been a huge growth in research in material science on finding novel nanostructured materials with advanced material properties. Recently, a novel two-dimensional material, i.e., phosphorene sheets with a characteristic puckered structure, has been explored. The study aims at providing a systematic investigation of the effect of atomistic defect on thermal–mechanical properties, such as Young’s modulus, shear modulus, specific heat capacity, and linear coefficient of thermal expansion (CTE), of phosphorene sheets using molecular dynamics simulation incorporated with Nosé–Hoover Langevin thermostat. The calculation results show that the Young’s modulus, shear modulus, specific heat capacity, and CTE of armchair and zigzag types of phosphorene sheets decrease with the increasing vacancy defect ratio. The specific heat capacity and linear CTE would rise with increasing temperature at low temperatures and converge to a constant value as temperature is larger than 600 K. Besides, the calculated specific heat capacity of the two types of phosphorene sheets all closely follows the Debye T3-law at low temperatures.

materials science, multidisciplinary
Effect of Nitrogen-Vacancy Complex Defects on the Electronic Transport of Carbon Nanotube

Jianwei Wei,Huifang Hu,Zhiyong Wang,Hui Zeng,Yan Wei,Jinfeng Jia

DOI: https://doi.org/10.1063/1.3082022

IF: 4

2009-01-01

Applied Physics Letters

Abstract:Effect of nitrogen-vacancy complex defects on the transport properties of single-walled nanotubes are simulated using density functional theory and nonequilibrium Green's functions. We find that the defect state in carbon nanotubes becomes spatially localized and develops one half-filled impurity band near the Fermi level for either N-vacancy or N-3-vacancy defect. The impurity bands are favorable to the electronic transport of the semiconducting nanotube (8, 0) but weaken that of metallic (4, 4). The studied results show that the differential conductance of the nanotubes behaves obvious oscillation characteristic.
Effects of Intrinsic Strain on the Structural Stability and Mechanical Properties of Phosphorene Nanotubes

Xiangbiao Liao,Xi Chen

DOI: https://doi.org/10.1088/0957-4484/27/21/215701

2016-01-01

Abstract:Using molecular dynamics (MD) simulations, we explore the structural stability and mechanical integrity of phosphorene nanotubes (PNTs), where the intrinsic strain in the tubular PNT structure plays an important role. It is proposed that the atomic structure of larger-diameter armchair PNTs (armPNTs) can remain stable at higher temperature, but the high intrinsic strain in the hoop direction renders zigzag PNTs (zigPNTs) less favorable. The mechanical properties of PNTs, including the Young's modulus and fracture strength, are sensitive to the diameter, showing a size dependence. A simple model is proposed to express the Young's modulus as a function of the intrinsic axial strain which in turns depends on the diameter of PNTs. In addition, the compressive buckling of armPNTs is length-dependent, whose instability modes transit from column buckling to shell buckling are observed as the ratio of diameter/length increases.
Effects of Vacancy-Carboxyl Pair Functionalization on Electronic Properties of Carbon Nanotubes

Chenchen Wang,Gang Zhou,Jian Wu,Bing-Lin Gu,Wenhui Duan

DOI: https://doi.org/10.1063/1.2364844

IF: 4

2006-01-01

Applied Physics Letters

Abstract:Density functional calculations are performed to investigate the functionalization of carbon nanotubes with the vacancy and carboxyl group that always appear in pairs after chemical oxidation (such as oxidative acid treatment). It is found that the geometrical structures and electronic properties of the nanotubes are changed significantly, with the formation of a strong covalent bond between the carboxyl and the defected tube. The electrical conductivity of the system could be considerably enhanced, which sensitively depends upon the axial density of vacancy-carboxyl pairs. A promising approach, controllable oxidative acid treatment, is designed to make carbon nanotube-based chemical and nanoelectronic devices.
Buckling Behaviors of Imperfect Single-Walled Carbon Nanotubes: A Molecular Dynamic Simulation

Yong Li,Zaoyang Guo,Bei Peng

DOI: https://doi.org/10.4028/www.scientific.net/amm.110-116.3831

2011-01-01

Applied Mechanics and Materials

Abstract:Carbon nanotube has attracted tremendous scientific and industrial interests due to its exceptional mechanical, electrical and thermal properties. In this paper, classic molecular dynamic simulations are carried out to investigate the buckling behaviors and mechanical properties of single-walled carbon nanotubes under axial compression, both for perfect and imperfect ones introducing atomic vacancies. The effect of chirality, diameter, quantity and position of vacancy are systematically studied. The simulation results reveal that their mechanical properties such as Young's modulus, critical strain and stress suffering a significant decline as the increasing numbers of vacancies. It is also found that the critical stress and strain are sensitive to position of atomic vacancy. Carbon nanotubes with vacancies located at the center have lower critical strain and are easier to reach the failure stage than those with vacancies at both sides.
Defect engineering of carbon nanotubes and its effect on mechanical properties of carbon nanotubes/polymer nanocomposites: A molecular dynamics study

Hang Zhang,Zhipeng Zhou,Jiali Qiu,Pengwan Chen,Weifu Sun

DOI: https://doi.org/10.1016/j.coco.2021.100911

IF: 8

2021-12-01

Composites Communications

Abstract:Molecular dynamics simulations have been performed to explore the effect of intrinsic defects of carbon nanotubes (CNTs) on the mechanical properties of CNTs/polyethylene (PE) composites. Three kinds of defects including single adatom defect, single vacancy defect and an adatom-vacancy pair defect have been considered here. The longitudinal Young's moduli of individual CNTs and CNTs/PE composites with different defects were calculated. On this basis, the interfacial interaction energy between CNTs and PE matrix and the adsorption behavior of PE molecular chains on the surface of CNTs were characterized. The results show that the elastic properties of individual CNTs and the interfacial characteristics between CNTs and matrix both contribute to the elastic properties of CNTs/PE composites. Meanwhile, due to different interaction energies, there exists three different adsorption modes of PE molecular chains on the surface of CNTs. Compared with the MD simulation results, the rule of mixture does not solidly hold in predicting the Young's modulus of composites for large defect degree.

materials science, composites
Size- and Chirality-Dependent Structural and Mechanical Properties of Single-Walled Phenine Nanotubes

Yanjun Liu,Ruijie Wang,Liya Wang,Jun Xia,Chengyuan Wang,Chun Tang

DOI: https://doi.org/10.3390/ma16134706

IF: 3.4

2023-06-29

Materials

Abstract:Phenine nanotubes (PNTs) have recently been synthesized as a promising new one-dimensional material for high-performance electronics. The periodically distributed vacancy defects in PNTs result in novel semiconducting properties, but may also compromise their mechanical properties. However, the role of these defects in modifying the structural and mechanical properties is not yet well understood. To address this, we conducted systematic molecular dynamics simulations investigating the structural evolution and mechanical responses of PNTs under various conditions. Our results demonstrated that the twisting of linear carbon chains in both armchair and zigzag PNTs led to interesting structural transitions, which were sensitive to chiralities and diameters. Additionally, when subjected to tensile and compressive loading, PNTs’ cross-sectional geometry and untwisting of linear carbon chains resulted in distinct mechanical properties compared to carbon nanotubes. Our findings provide comprehensive insights into the fundamental properties of these new structures while uncovering a new mechanism for modifying the mechanical properties of one-dimensional nanostructures through the twisting–untwisting of linear carbon chains.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
The Controllable Mechanical Properties of Coiled Carbon Nanotubes with Stone–Wales and Vacancy Defects

Zhiwu Bie,Yajie Deng,Xuefeng Liu,Jiaqi Zhu,Jixiao Tao,Xian Shi,Xiaoqiao He

DOI: https://doi.org/10.3390/nano13192656

IF: 5.3

2023-09-27

Nanomaterials

Abstract:Coiled carbon nanotubes (CCNTs) as a promising nanometer scale spring are investigated for the effect of the defects on the tensile mechanical properties of CCNTs by using molecular dynamics (MD) simulations. Six samples of defective CCNTs are constructed by introducing the defects in the different positions. The results show an obvious decrease in the spring constant and elastic limit of defective CCNTs, which results in the lower energy storage ability during the elastic range compared with the perfect CCNTs. However, the defected CCNTs exhibit better ductility (138.9%) and higher energy absorbing ability (1539.93 J/g) during the fracture process since introduced defects change the deformation pattern. Furthermore, among the defected CCNTs, the stiffness (1.48~1.93 nN/nm), elastic limit (75.2~88.7%), ductility (108.5~138.9%), and deformation pattern can be adjusted by changing the position or the type of defects. This study firstly provides insight into the effects of Stone–Wales (SW) and vacancy defects on the mechanical properties of CCNTs, and the obtained results are meaningful for designing CCNTs with specified properties by introducing defects.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Molecular Dynamics Simulation for Compressive Mechanics Properties of Swcnt with Random Distributed Vacancies

Q. Cheng,X. X. Wang,N. G. Ni

DOI: https://doi.org/10.4028/www.scientific.net/ssp.121-123.1161

2007-01-01

Abstract:Configurations of single-walled carbon nanotubes (SWCNTs) with randomly distributed vacancies were generated by numerical method. Molecular dynamics (MD) method was used to investigate the compressive mechanics properties of SWCNTs with vacancies. The simulation results show that the SWCNTs with vacancies have more complicated deformation procedures and the Young's modulus is lower than the corresponding perfect SWCNTs. The Young's modulus of the SWCNTs with no more than 20 vacancies ranges from 940Gpa to 620Gpa, and its value is approximately linearly proportional to the number of vacancies. It is found that local buckling first appears in the surface region having high density of vacancies of (10, 10) SWCNTs under axial compression. As the loading increases, SWCNTs with more vacancies have more complicated buckling configuration and sluggish energy variation. Under a case of the same displacement load the more vacancies the SWCNT has, the more complicated the mechanical behavior is. SWCNTs with 20 vacancies can still maintain self structure stabilization, this validates that SWCNTs have good spacial stabilization.

Effect of Vacancies on the Mechanical Properties of Phosphorene Nanotubes

Vacancy migrations in carbon nanotubes.

Mechanical Properties of Pristine and Defective Carbon-Phosphide Monolayers: A Density Functional Tight-Binding Study

Numerical Exploration Of The Defect'S Effect On Mechanical Properties Of Nanowires Under Torsion

First-principles Study for Transport Properties of Armchair Carbon Nanotubes with a Double Vacancy under Strain

Atomic vacancies significantly degrade the mechanical properties of phosphorene.

Effects of Vacancies on Interwall Spacings of Multi-Walled Carbon Nanotubes

Effects of atomic vacancy defects and their evolution mechanisms on the fracture of carbon nanotubes

First-Principles Study of the Defected Phosphorene under Tensile Strain

A Computational Study of the Electronic Properties of One-Dimensional Armchair Phosphorene Nanotubes

Highly Itinerant Atomic Vacancies in Phosphorene

Tension-Induced Phase Transformation and Anomalous Poisson Effect in Violet Phosphorene

Influence of structural defect on thermal–mechanical properties of phosphorene sheets

Effect of Nitrogen-Vacancy Complex Defects on the Electronic Transport of Carbon Nanotube

Effects of Intrinsic Strain on the Structural Stability and Mechanical Properties of Phosphorene Nanotubes

Effects of Vacancy-Carboxyl Pair Functionalization on Electronic Properties of Carbon Nanotubes

Buckling Behaviors of Imperfect Single-Walled Carbon Nanotubes: A Molecular Dynamic Simulation

Defect engineering of carbon nanotubes and its effect on mechanical properties of carbon nanotubes/polymer nanocomposites: A molecular dynamics study

Size- and Chirality-Dependent Structural and Mechanical Properties of Single-Walled Phenine Nanotubes

The Controllable Mechanical Properties of Coiled Carbon Nanotubes with Stone–Wales and Vacancy Defects

Molecular Dynamics Simulation for Compressive Mechanics Properties of Swcnt with Random Distributed Vacancies