Miguel R. Castellanos,Vasanthan Raghavan,Jung H. Ryu,Ozge H. Koymen,Junyi Li,David J. Love,Borja Peleato
Abstract:The focus of this paper is on multi-user MIMO transmissions for millimeter wave systems with a hybrid precoding architecture at the base-station. To enable multi-user transmissions, the base-station uses a cell-specific codebook of beamforming vectors over an initial beam alignment phase. Each user uses a user-specific codebook of beamforming vectors to learn the top-P (where P >= 1) beam pairs in terms of the observed SNR in a single-user setting. The top-P beam indices along with their SNRs are fed back from each user and the base-station leverages this information to generate beam weights for simultaneous transmissions. A typical method to generate the beam weights is to use only the best beam for each user and either steer energy along this beam, or to utilize this information to reduce multi-user interference. The other beams are used as fall back options to address blockage or mobility. Such an approach completely discards information learned about the channel condition(s) even though each user feeds back this information. With this background, this work develops an advanced directional precoding structure for simultaneous transmissions at the cost of an additional marginal feedback overhead. This construction relies on three main innovations: 1) Additional feedback to allow the base-station to reconstruct a rank-P approximation of the channel matrix between it and each user, 2) A zeroforcing structure that leverages this information to combat multi-user interference by remaining agnostic of the receiver beam knowledge in the precoder design, and 3) A hybrid precoding architecture that allows both amplitude and phase control at low-complexity and cost to allow the implementation of the zeroforcing structure. Numerical studies show that the proposed scheme results in a significant sum rate performance improvement over naive schemes even with a coarse initial beam alignment codebook.
What problem does this paper attempt to address?
This paper aims to solve the problems of channel reconstruction and multi - user transmission in the hybrid precoding architecture in millimeter - wave multi - user multiple - input multiple - output (MIMO) systems. Specifically, the paper focuses on the following points:
1. **Channel Sparsity and Directional Transmission**: Millimeter - wave channels have spatial sparsity, that is, there are only a few dominant clusters in the channel. Therefore, using large antenna arrays for directional transmission becomes an effective solution.
2. **Hybrid Precoding Architecture**: Traditional all - digital precoding schemes become impractical in the millimeter - wave frequency band due to problems such as a large number of radio - frequency (RF) links, high cost, and high power consumption. Therefore, the paper proposes a hybrid precoding architecture to reduce complexity and cost by reducing the number of RF links.
3. **Channel Estimation and Feedback Mechanism**: In order to achieve multi - user transmission, the base station needs to obtain the best beam - pair information for each user through the initial beam - alignment phase. The paper proposes an advanced feedback mechanism that enables the base station to reconstruct a low - rank approximation of the channel matrix, thereby better combating multi - user interference.
4. **Zero - Forcing Structure**: The paper proposes a zero - forcing - based precoding structure that meets the amplitude and phase control constraints of RF precoding through quantization processing. This structure can significantly improve the overall rate performance of the system while maintaining low feedback overhead.
### Main Contributions
1. **Channel Reconstruction**: The paper proposes a method. Through additional feedback information (such as phase estimation of the received signal and cross - correlation information of user - side beams), the base station can reconstruct a low - rank approximation of the channel matrix. This allows the base station to ignore the specific beam information at the user side when designing the precoder.
2. **Zero - Forcing Structure**: Based on the reconstructed channel matrix, the paper proposes a zero - forcing precoding structure and meets the constraints of RF precoding through quantization processing. This structure can effectively combat interference in multi - user transmission.
3. **Performance Evaluation**: Through numerical studies, the paper compares the performance of the proposed scheme with that of traditional beam - forming schemes. The results show that even when the resolution of the initial beam - alignment codebook is low, the proposed scheme can still significantly improve the overall rate performance of the system.
### Mathematical Expressions
- **Channel Model**:
\[
H_k=\sqrt{N_r N_t}\sum_{\ell = 1}^{L_k}\alpha_{k,\ell}u_{k,\ell}v_{k,\ell}^{\dagger}
\]
where $\alpha_{k,\ell}$ is the complex gain, and $u_{k,\ell}$ and $v_{k,\ell}$ are the array steering vectors at the user side and the base station side, respectively.
- **Received Signal**:
\[
y_k = \sqrt{\rho}H_kF_{RF}\left[\sum_{m = 1}^K F_{Dig,m}s_m\right]+n_k
\]
where $\rho$ is the signal - to - noise ratio before precoding, and $n_k$ is the additive white Gaussian noise.
- **Channel Reconstruction**:
\[
\hat{H}_k=\sum_{\ell = 1}^P\hat{\alpha}_{k,\ell}\hat{u}_{k,\ell}\hat{v}_{k,\ell}^{\dagger}
\]
where $\hat{u}_{k,\ell}$ and $\hat{v}_{k,\ell}$ are the estimated values of the array steering vectors.
- **Zero - Forcing Precoding**:
\[
f_k=\frac{(I_{N_t}+\sum_{m\neq k}\eta_{m,k}\hat{H}_m^{\dagger}g_mg_m^{\dagger}\hat{H}_m)^{-1}\hat{H}_k^{\dagger}g_k}{\|(I_{N_t}+\sum_{m\neq k}\eta_{m,k}\hat{H}_m^{\dagger}g_mg_m^{\dagger}\hat{H}_m)^{-1}\hat{H}_k^{\dagger}g_k\|}
\]