Hybrid aeroacoustic investigation of turbulent 90° pipe bend flow with source terms from Large-Eddy Simulation
J. Tieber,H. Steiner,P. Maurerlehner,S. Schoder,K. Schäfer,A. Ennemoser,M. Kaltenbacher,G. Brenn
DOI: https://doi.org/10.1016/j.compfluid.2024.106323
IF: 3.077
2024-05-28
Computers & Fluids
Abstract:The internal, low Mach number, turbulent flow-induced acoustic field of a cylindrical 90° pipe bend with a curvature radius Rm/D=1.02 is investigated using hybrid Computational Aero-Acoustics (CAA). Incompressible Large-Eddy Simulation (LES) is used to computationally describe the turbulent flow field at bulk Reynolds numbers ReB=5000,12000,26000 and 66000 . The incompressible LES predicts all salient flow features, like the separation from the inner wall of the bend followed by a turbulent recirculation zone, in good agreement with literature. The internal flow-induced noise is predicted by solving Acoustic Propagation Equations (APE) applying Lighthill's Equation (LE), Ribner's Dilatation Equation (RDE) and the Perturbed Convective Wave Equation (PCWE), provided with acoustic source terms obtained from the incompressible LES. The turbulent recirculation zone is the most active region for generating acoustic sources. Among the two constituent components of the PCWE source term, the local pressure time derivative term turned out as clearly dominant in this region, so that PCWE and RDE predicted similar acoustic fields. The sub-grid scale (SGS) model applied in LES notably contributes only at high frequencies to the total LE source term, starting from f=2000 Hz for the lower Reynolds numbers and beyond for the higher. The mapping of source terms from the boundary layer resolving LES grid onto the typically coarser preferably uniform APE grid leads to lower high-frequency signal amplitudes for coarser APE mesh size in regions with small turbulent structures. The impact of this amplitude reduction on the predicted acoustics sound power levels was still very small, exhibiting relative differences less than 0.7% for the different APE meshes. Despite the LES-specific limitations expected from the decrease of directly resolved content for higher Reynolds number, the use of increasingly underresolved source terms did not significantly lower the accuracy of finally predicted acoustics. The comparison of the acoustic results against data from dedicated measurements generally showed very good agreement for all Reynolds numbers.
mechanics,computer science, interdisciplinary applications