Abstract:An instrument has been developed for continuous monitoring of 220Rn. The method of data analysis is based on delayed coincidences between 220Rn and 216Po. The instrument basically consists of a scaler equipped with a photomultiplier tube (PMT) to which a scintillation cell (SC) of the flow through type is optically coupled. The scaler is equipped with a pulse output (P/O) port which provides a TTL pulse, +5 V in amplitude and 5 to 10 μs duration for each nuclear event recorded by the SC and its associated electronic circuitry. The P/O port is connected to a 32 bit counter/timer unit operating at 1 MHz which records and stores the time of arrival of pulses. For laboratory use, the counter/timer is connected to the serial port of a laptop PC. However, for field applications, where space and weight pose severe practical limitations, the PC is substituted by an expanded counter/timer unit which incorporates a muprocessor for data analysis, a LCD for data display, and a keypad to key in function instructions. Furthermore, some additional hardware permits the measurement of 220Rn flux density, J(220Rn), from soils and other materials. Because total α-particle count, as well as delayed (α - α) coincidence rates are recorded in two separate channels, the method permits the measurement of 222Rn in addition to 220Rn. The method is particularly useful for low concentration levels. The sensitivity of the method primarily depends on the volume of the SC. For a low volume SC (∼0.16 l), a sensitivity of 0.2 h−1/Bq m−3 for 220Rn and 1.4 h−1/Bq m−3 for 222Rn are readily attainable. For a large volume (1.5 l) SC (external PMT used), the sensitivity for 220Rn is ≥ 1.5 h−1/Bq m−3, depending on the SC design and the operating sampling flowrate. (Note: h−1 stands for counts per hour). The above instrument has been used extensively at the National Radon/Thoron Test Facility (NRTTF) of the Elliot Lake Laboratory for routine monitoring of 220Rn levels since 1992. It has also been used for outdoor and indoor 220Rn measurements, as well as for the determination of J(220Rn) from earthen materials and the like.

Measurement of low-energy background events due to $^{222}$Rn contamination on the surface of a NaI(Tl) crystal

Low Energy Fast Events from Radon Progenies at the Surface of a CsI(Tℓ) Scintillator

Measurement of the Intrinsic Radiopurity

A High-Sensitivity Radon Emanation Detector System for Future Low-Background Experiments

Characterization of a $^{220}$Rn source for low-energy electronic recoil calibration of the XENONnT detector

Measurements of low-energy nuclear recoil quenching factors for Na and I recoils in the NaI(Tl) scintillator

Measurement of the Background Activities of a 100Mo-enriched Powder Sample for an AMoRE Crystal Material by Using a Single High-Purity Germanium Detector

Measurement of the Background Activities of a 100Mo-enriched Powder Sample for an AMoRE Crystal Material by using Fourteen High-Purity Germanium Detectors

Alpha backgrounds in NaI(Tl) crystals of COSINE-100

Measurement of the Background Activities of a 100Mo-enriched powder sample for AMoRE crystal material using a single high purity germanium detector

Background model for the NaI(Tl) crystals in COSINE-100

Radon Concentration Measurement with a High-Sensitivity Radon Detector at the Yemilab

Neutron-gamma discrimination of CsI(Na) crystals for dark matter searches

$^{222}$Rn contamination mechanisms on acrylic surfaces

Y.F. Zhua,b, S.T. Linb,c, V. Singhb,d, W.C. Changb, M. Denizb,e,

Neutron background measurement for rare event search experiments in the YangYang Underground Laboratory

An instrument for continuous measurement of 220Rn (and 222Rn) using delayed coincidences between 220Rn and 216Po

Nuclear recoil measurement in CsI(Tl) crystal for Cold Dark Matter detection

Measurement of the quenching factor of Na recoils in NaI(Tl)