Experimental Study on High-Energy Fluid Jets from a Pipe: Jet Cone Morphology and Impact Force on Flat Plates
Tao Zhang,Qincheng Bi,Teng Wang,Jinle Zhao,Fan Feng,Zhaohui Liu
DOI: https://doi.org/10.1016/j.nucengdes.2024.113302
IF: 1.7
2024-01-01
Nuclear Engineering and Design
Abstract:Owing to potential adverse effects such as fatigue, vibration, scouring, and inherent defects, high-pressure pipelines in chemical processes may fail during operation. After failure, high-energy fluid jets into the surrounding space, causing damage to the surrounding equipment and personnel. In extreme cases, the load generated by the jet exerts a reaction force at the pipeline failure point, which causes the pipeline to produce a strong whip, further endangering surrounding systems. To prevent such fundamental and secondary damages, it is important to study the magnitude of the impact force caused by the jetting process and the extent of the impact of the jet cone on surrounding objects. In this study, an experimental visualization system was utilized that allowed for a continuous and stable heating-jetting-cooling-recovery process for the working fluid. The distance between the nozzle and the impacted target plate can be adjusted on purpose. In this system, deionized water was heated to various conditions (1-8 MPa; 20-344 degrees C) and different states, such as sub-cooled water, two-phase flow, and superheated steam, and then discharged into an atmospheric-pressure environment through pipes of different diameters (2.4-9.2 mm) and length-to-diameter ratios (20-120). Subsequently, the jet cone expanded freely or impacted plates of various sizes and at different distances. Based on the stability and flexibility of this experimental system, new details regarding the jetting process were obtained. Ultimately, a series of experimental data on the jet impact force were obtained, and the expansion morphology of the fluid in the atmospheric-pressure environment was recorded via a high-speed camera. The experimental results indicate that the water state parameters and the nozzle/pipe structural dimensions significantly affect the shape of the jet cone as well as the magnitude and variation pattern of the jet impact force. Additionally, the jet impact force varies with the distance from the outlets and the plate dimensions.