Abstract:Dynamic compressors are widely used in many industrial sectors, such as air, land, and marine vehicle engines, aircraft environmental control systems (ECS), air-conditioning and refrigeration, gas turbines, gas compression and injection, etc. The data-driven formulas of mass flow rate and isentropic efficiency of dynamic compressors are required for the design, energy analysis, performance simulation, and control- and/or diagnosis-oriented dynamic simulation of such compressors and the related systems. This work develops data-driven models for predicting the performance of dynamic compressors, including empirical models for mass flow rate and isentropic efficiency, which have high prediction accuracy and broad application range. The performance maps of two multi-stage axial compressors of an aero engine and a centrifugal compressor of an aircraft ECS were chosen for evaluation of the existing empirical formulas and testing of the new models. There are 16 empirical models of mass flow rate and 14 empirical models of isentropic efficiency evaluated, and the results show that it is necessary to develop highly accurate empirical formulas both for mass flow rate and isentropic efficiency. With the data-driven method, two empirical models for mass flow rate and one for isentropic efficiency are developed. They are in general form, with some terms removable to make them simple while enhancing their applicability and prediction accuracy. The new models have much higher prediction accuracy than the best existing counterparts. The new mass flow rate models predict for the three compressors a mean absolute relative deviation (MAD) not greater than 1.3%, while the best existing models all have MAD > 2.0%. The new efficiency model predicts for the three compressors an MAD of 1.0%, 0.4%, and 1.9%, respectively, while the best existing model predicts for the three compressors an MAD of 1.8%, 0.8%, and 3.2%, respectively.

An Exponential Decay Model for the Deterministic Correlations in Axial Compressors

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

An improved deviation model for transonic stages in axial compressors

Performance Characteristic Modeling for 2D Compressor Cascades

Compressibility Effects On The Two Generations Of Unsteady Flow Types In Axial Flow Compressors

Development of A Throughflow Method for Aerodynamic Analysis of Highly Loaded Axial Flow Compressors

An axisymmetric characteristic model for enhancing the prediction of centrifugal compressor characteristics

An Efficient Uncertainty Quantification Method Based on Inter-Blade Decoupling for Compressors

A viscous blade body force model for computational fluid dynamics–based throughflow analysis of axial compressors

A numerical simulation strategy for a compressor's underlying axisymmetric characteristic and its application in body force model

Development and application of a throughflow method for high-loaded axial flow compressors

A Method of Stall and Surge Prediction in Axial Compressors Based on Three-Dimensional Body-Force Model

Unsteady Cooperative Flow Type in the Axial Compressor

New Data-Driven Models of Mass Flow Rate and Isentropic Efficiency of Dynamic Compressors

Experiment and Numerical Simulation of the Performance on Scaled Compressor Cascade and Development of a Prediction Model

Investigation on the Performance Prediction of Single-Stage Axial Compressor by Using Different Turbulence Models

Assessment of advanced RANS turbulence models for prediction of complex flows in compressors

A Zero-Dimensional Physics–Based Model to Guide Supersonic Rotor Design of a Counterrotating Compressor

Three-Dimensional Compressor Blading Design Improvements in Low-Speed Model Testing

Quantitative analysis of energy loss and performance prediction of regenerative compressor

Stochastic aerodynamic analysis for compressor blades with manufacturing variability based on a mathematical dimensionality reduction method