Abstract:A green and novel FeCl3‐catalyzed hydrothermal pretreatment method is adopted to convert the bamboo shavings waste into bamboo‐based hierarchical porous carbons (BHPCs) with ultra‐high specific surface area and excellent electrochemical properties. Summary Herein, a green and novel FeCl3‐catalyzed hydrothermal pretreatment method is adopted to convert the bamboo shavings waste into bamboo‐based hierarchical porous carbons (BHPCs) with ultra‐high specific surface area and excellent electrochemical properties. Utilizing this mild FeCl3 catalyst can not only promote the dehydration, condensation, and carbonization of bamboo shavings to catalyze the formation of hydrochar, but also facilitate the development of the pore structure of hydrochar. Moreover, the effects of different FeCl3 solution concentrations, activation temperatures, and KOH/hydrochar ratios on the pore structure of BHPCs and the electrochemical performance of supercapacitors are thoroughly investigated. Compared with the hydrothermal carbonization without FeCl3 addition, the BHPCs (1‐BHPC‐800‐5) electrode materials obtained by FeCl3‐catalyzed hydrothermal pretreatment have superior specific surface area (up to 3688 m2 g−1) and total pore volume (as high as 1.989 cm3 g−1). Meanwhile, the best‐performing 1‐BHPC‐800‐5 demonstrates outstanding electrochemical performance in supercapacitor applications, providing a pleasant capacitance of 378 F g−1 at 0.5 A g−1 and capacitance retention of 96.6% after 10 000 charge/discharge cycles at 5.0 A g−1 in 6.0 M KOH electrolyte. The energy density can reach 10.3 Wh kg−1 at a power density of 250 W kg−1 in a two‐electrode system. Therefore, this novel and efficient catalytic hydrothermal pretreatment method offers a promising prospect for converting waste biomass into hierarchical porous carbon materials with a large specific surface area and excellent electrochemical properties. Key Points Adopting a green FeCl3‐catalyzed hydrothermal pretreatment method to convert bamboo shavings waste into BHPCs. BHPCs exhibit a hierarchical porous structure and an ultra‐high specific surface area (up to 3688 m2 g−1). A very high capacitive performance (378 F g−1 at 0.5 Ag−1) is achieved. The excellent rate performance (nearly 71% capacitance retention), outstanding cycle stability (capacitance retention of 96.6% after 10 000 charge/discharge cycles) and large energy density (10.3 Wh kg−1 at 250 W kg−1) are demonstrated.

Effect of various ammonium salts as activating additive on the capacitance performance of hierarchical porous carbon derived from camellia husk

Porous carbon derived from cashew nut husk biomass waste for high-performance supercapacitors

Hierarchical Porous Carbon Derived from Recycled Bamboo Waste As Supercapacitors Electrodes Based on FeCl 3 ‐catalyzed Hydrothermal Pretreatment: Pore Regulation and High‐performance Analysis

Potassium citrate assisted synthesis of hierarchical porous carbon materials for high performance supercapacitors

Influence of KHCO3 Activation on Characteristics of Biomass-Derived Carbons for Supercapacitor

Hierarchical porous carbon derived from recycled bamboo waste as supercapacitors electrodes based on FeCl3‐catalyzed hydrothermal pretreatment: Pore regulation and high‐performance analysis

Preparation of hierarchical porous carbon through one-step KOH activation of coconut shell biomass for high-performance supercapacitor

Hierarchical Micro-/Mesoporous Carbon Derived from Rice Husk by Hydrothermal Pre-Treatment for High Performance Supercapacitor

High surface area porous carbon derived from chitosan: CH3COOH/(NH4)2HPO4 dual-assisted hydrothermal carbonization synthesis and its application in supercapacitor

Nitrogen-doped hierarchical porous carbon as an efficient electrode material for supercapacitors

Heteroatom-doped porous carbons derived from lotus pollen for supercapacitors: Comparison of three activators

Biomass-derived 3D hierarchical porous carbon by two-step activation method for supercapacitor

Hierarchical porous carbon derived from coal and biomass for high performance supercapacitors

Comparison of the heteroatoms-doped biomass-derived carbon prepared by one-step nitrogen-containing activator for high performance supercapacitor

Peanut shell waste derived porous carbon for high-performance supercapacitors

3D nitrogen and sulfur co-doped hierarchical porous carbon derived from mung bean jelly for high performance supercapacitors

Biomass-derived nitrogen-doped porous carbons with tailored hierarchical porosity and high specific surface area for high energy and power density supercapacitors

Manganous nitrate -assisted potassium hydroxide activation of humic acid to prepare oxygen-rich hierarchical porous carbon as high-performance supercapacitor electrodes

Synthesis of activated carbon nanospheres with hierarchical porous structure for high volumetric performance supercapacitors

Three-dimensional Nitrogen-Doped Hierarchical Porous Carbon Derived from Cross-Linked Lignin Derivatives for High Performance Supercapacitors

Facile 3D Nitrogen‐Doped Hierarchical Porous Carbon for High‐Performance Supercapacitors