Abstract:Lithium (Li) metal anodes are critical components for next-generation high-energy density batteries, owing to their high theoretical specific capacity (3800 mAh.g(-1)) and low voltage (-3.040 V versus the standard hydrogen electrode). However, their applications are hindered by dendrite growth, which potentially induces inner short circuit and leads to safety issues. Employing three-dimensional (3D) current collectors is an effective strategy to suppress dendrite growth by decreasing the local current density. However, many of the reported 3D current collectors have a lithiophobic surface, which leads to non-uniform Li+ ion deposition. Thus, a complicated modification process is required to increase the lithiophilic property of the current collectors. In addition, they have a large weight or volume, which greatly lowers the energy density of the entire anode. In this work, we report a lightweight 3D carbon current collector with a lithiophilic surface by employing the direct carbonization of low-cost bacterial cellulose (BC) biomass. The current collector is composed of electrically conductive, robust, and interconnected carbon nanofiber networks, which provide sufficient void space to accommodate a large amount of Li and buffer the volume changes during Li plating and stripping. More importantly, homogeneously distributed oxygen-containing functional groups on the nanofiber surface are retained by controlling the carbonization temperature. These functional groups serve as uniform nucleation sites and help realize uniform and dendrite-free Li deposition. Notably, the areal mass density of the 3D carbon current collector was only 0.32 mg.cm(-2) and its mass ratio in the whole anode was 28.8%, with a capacity of 3 mAh.cm(-2). This 3D carbon current collector facilitates the stable working of the half cells for 150 cycles under a high current density of 3 mA.cm(-2) or a high capacity of 4 mAh.cm(-2). Symmetric cells exhibit a steady cycling life as long as 600 h under a current density of 1 mA.cm(-2) and a capacity of 1 mAh.cm(-2). Moreover, appreciable cycling performance was realized in the full cells when the anodes were paired with LiNi0.8Co0.15Al0.05 cathodes. Furthermore, the low-cost raw materials and the simple preparation method promise significant potential for the future applications of the proposed 3D current collectors.

3D current collector based on cellulose-carbon nanotube nanocomposites for all-solid-state batteries

Highly Conductive Ink Based on Self‐Aligned Single‐Walled Carbon Nanotubes through Inter‐Fiber Sliding in Cellulose Fibril Networks

Direct-spun carbon nanotube sheet: A flexible, ultralight, stackable three-dimensional current collector for high-performance lithium-ion batteries

Synthesis of nanoporous three-dimensional current collector for high-performance lithium-ion batteries

Cellulose‐Nanofiber‐Enabled 3D Printing of a Carbon‐Nanotube Microfiber Network

Carbon Nanostructures: Covalently Connected Carbon Nanostructures for Current Collectors in Both the Cathode and Anode of Li–S Batteries (adv. Mater. 41/2016)

Bacterial Cellulose-Derived Three-Dimensional Carbon Current Collectors for Dendrite-Free Lithium Metal Anodes

Graphite/Silicon Hybrid Electrodes using a 3D Current Collector for Flexible Batteries

Highly Conductive, Light Weight, Robust, Corrosion‐Resistant, Scalable, All‐Fiber Based Current Collectors for Aqueous Acidic Batteries

Intertwined CNT Assemblies as an All-Around Current Collector for Volume-Efficient Lithium-Ion Hybrid Capacitors

Direct-Ink-Write Printing and Electrospinning of Cellulose Derivatives for Conductive Composite Materials

Super-aligned carbon nanotube films with a thin metal coating as highly conductive and ultralight current collectors for lithium-ion batteries

Aligned carbon fibers–carbon nanotube–polymer–based composite as lithium-ion battery current collector

Rationally Designed Graphene-Nanotube 3D Architectures with a Seamless Nodal Junction for Efficient Energy Conversion and Storage.

3D Printed Nitrogen‐Doped Thick Carbon Architectures for Supercapacitor: Ink Rheology and Electrochemical Performance

In Situ Polymerization on a 3D Ceramic Framework of Composite Solid Electrolytes for Room‐Temperature Solid‐State Batteries

A Dual Protection System for Heterostructured 3D CNT/CoSe2/C As High Areal Capacity Anode for Sodium Storage.

Three-dimensional Network Current Collectors Supported Si Nanowires for Lithium-Ion Battery Applications

Enhancing Lithium-Ion Batteries with a 3D Conductive Network Silicon-Carbon Nanotube Composite Anode

Rational design of highly conductive and stable 3D flexible composite current collector for high performance lithium-ion battery electrodes

Advanced 3D Current Collectors for Lithium-Based Batteries