Abstract:Purpose: Computational fluid dynamics (CFD) and 4D-flow magnetic resonance imaging (MRI) are synergically used for the simulation and the analysis of the flow in a patient-specific geometry of a healthy thoracic aorta. Methods: CFD simulations are carried out through the open-source code SimVascular. The MRI data are used, first, to provide patient-specific boundary conditions. In particular, the experimentally acquired flow rate waveform is imposed at the inlet, while at the outlets the RCR parameters of the Windkessel model are tuned in order to match the experimentally measured fractions of flow rate exiting each domain outlet during an entire cardiac cycle. Then, the MRI data are used to validate the results of the hemodynamic simulations. As expected, with a rigid-wall model the computed flow rate waveforms at the outlets do not show the time lag respect to the inlet waveform conversely found in MRI data. We therefore evaluate the effect of wall compliance by using a linear elastic model with homogeneous and isotropic properties and changing the value of the Young's modulus. A stochastic analysis based on the polynomial chaos approach is adopted, which allows continuous response surfaces to be obtained in the parameter space starting from a few deterministic simulations. Results: The flow rate waveform can be accurately reproduced by the compliant simulations in the ascending aorta; on the other hand, in the aortic arch and in the descending aorta, the experimental time delay can be matched with low values of the Young's modulus, close to the average value estimated from experiments. However, by decreasing the Young's modulus the underestimation of the peak flow rate becomes more significant. As for the velocity maps, we found a generally good qualitative agreement of simulations with MRI data. The main difference is that the simulations overestimate the extent of reverse flow regions or predict reverse flow when it is absent in the experimental data. Finally, a significant sensitivity to wall compliance of instantaneous shear stresses during large part of the cardiac cycle period is observed; the variability of the time-averaged wall shear stresses remains however very low. Conclusions: In summary, a successful integration of hemodynamic simulations and of MRI data for a patient-specific simulation has been shown. The wall compliance seems to have a significant impact on the numerical predictions; a larger wall elasticity generally improves the agreement with experimental data.

In vivo validation of a one-dimensional finite-element method for predicting blood flow in cardiovascular bypass grafts

A Novel Physics-Based Model for Fast Computation of Blood Flow in Coronary Arteries

Experimental Study on Anastomotic Hemodynamics Using Tomographic Particle Image Velocimetry

One-dimensional Arterial Network Model for Bypass Grafts Assessment

Computational replication of the patient-specific stenting procedure for coronary artery bifurcations: From OCT and CT imaging to structural and hemodynamics analyses

Numerical Simulation of Physiological Blood Flow in 2-Way Coronary Artery Bypass Grafts

Hemodynamic Simulation in a Novel Design for Femoral Bypass Grafts.

Validation of a novel numerical model to predict regionalized blood flow in the coronary arteries

Numerical modeling of hemodynamics scenarios of patient-specific coronary artery bypass grafts

Patient-specific computational simulation of coronary artery bypass grafting

A Numerical Simulation of Hemodynamics in 2-Way CABG

A hemodynamic model of artery bypass graft considering microcirculation function

Computer Simulation of Distal End-To-Side Bypass Blood Flow Pattern

Simulation of Hemodynamics in Femoral 2-way Bypass Graft

Computational Approach to Hemodynamics in Femoral Bypass Graft

A one-dimensional finite element method for simulation-based medical planning for cardiovascular disease

Flow Analysis of End-to-End Femoral Bypass Graft

Numerical Study of Hemodynamics Comparison Between Small and Large Femoral Bypass Grafts

Numerical investigation of pulsatile flow in an S-type bypass graft

Validation of Numerical Simulations of Thoracic Aorta Hemodynamics: Comparison with In Vivo Measurements and Stochastic Sensitivity Analysis

In Vivo Intravascular Optical Coherence Tomography (IVOCT) Structural and Blood Flow Imaging Based Mechanical Simulation Analysis of a Blood Vessel