Abstract:Direct conversion of methane, the dominating component of natural and shale gases, into key chemical feedstock and liquid fuels has long been a big challenge in chemistry and chemical engineering [1, 2]. The industrial processes for methane-resourced higher hydrocarbons (e.g. olefin and gasoline) are based on indirect methane conversion integrating several catalytic reaction technologies. The production of syngas (a mixture of H2 and CO) by catalytic methane steam reforming over a supportedNi catalyst is always the first technology. The second is methanol synthesis from syngas using a supported Cu–ZnO catalyst. The third technology in the integration is methanol-to-olefin or methanolto-gasoline, employing zeolite-based catalysts. The syngas production is energy intensive and capital costing; the breaking of C–H bonds in methane has to be substantially reversed in the subsequent processes to produce olefins and fuels [3]. When the syngas conversion is devised instead to produce higher hydrocarbons, inevitable loss of carbon as CO2 would happen, leading to methane utilization efficiency no higher than 50%. As the smallest hydrocarbonmolecule in tetrahedron symmetry, methane holds the strongest C–H bond (434 kJ/mol) and the lowest polarizability. Suitable catalysts and oxidants (such as oxygen, halogens and water) are always desirable for the initiation (activation) and product selectivity control of its reaction [1–3]. Summarized in Fig. 1A are the presently known possibilities of direct methane conversion. Catalysts are the keys to these possibilities except the long-known energy-intensive high-temperature non-catalytic methane pyrolysis process for acetylene production (a). The discovery in the early 1980s of ethylene formation via oxidative coupling of methane over redox oxide

Enhanced c2 yields from methane oxidative coupling by means of a separative chemical reactor

Direct Conversion of Methane to Propylene

A Reaction-Separation Combined Ocm Process For High C-2 Hydrocarbon Yields

From fundamentals to chemical engineering on oxidative coupling of methane for ethylene production: A review

Nonoxidative Coupling of Methane to Olefins and Aromatics over Molten W-In Bimetal Catalyst

Detailed kinetic modeling of catalytic oxidative coupling of methane

Selective oxidative coupling of methane via surface-confined methyl-radical transformation

Synergy of Ag and AgBr in a Pressurized Flow Reactor for Selective Photocatalytic Oxidative Coupling of Methane

A Theoretical Analysis on Oxidative Coupling of Methane in Tubular Dense Membrane Reactor

Assessment of catalysts for oxidative coupling of methane and ethylene

A Milestone in Methane Conversion

Investigation of Low Temperature Methane Oxidative Coupling Catalyst

Enhancing the Acetylene Yield from Methane by Decoupling Oxidation and Pyrolysis Reactions: A Comparison with the Partial Oxidation Process

Direct Conversion of Methane to C2 Hydrocarbons in Solid-State Membrane Reactors at High Temperatures

Non-oxidative Coupling of Methane to Ethylene Using Mo2 C/[B]ZSM-5

Expanded Reactor Engineering Calculations for the Oxidative Coupling of Methane

Lithium carbonate-promoted mixed rare earth oxides as a generalized strategy for oxidative coupling of methane with exceptional yields

Non-Catalytic Partial Oxidation of C2+ Hydrocarbon/H2 Mixtures

Direct conversion of methane to formaldehyde and CO on B2O3 catalysts

Consequence of products from oxidative coupling of methane in non-oxidative high temperature environment

Optimizing the cask effect in multicomponent natural gas purification to provide high methane productivity