Removing fluoride ions from wastewater by Fe 3 O 4 nanoparticles: Modified Rhodophytes (red algae) as biochar
Amrutashree Hota,S. Gopal Krishna Patro,Sanjaya Kumar Panda,Mohammad Amir Khan,Mohd Abul Hasan,Saiful Islam,Majed Alsubih,Nadeem A. Khan,Sasan Zahmatkesh
DOI: https://doi.org/10.1016/j.jwpe.2024.104776
IF: 7
2024-01-15
Journal of Water Process Engineering
Abstract:The present study seeks to utilize the biochar prepared from red algae (AR) and its composite with iron oxide (Fe 3 O 4 )-nanoparticle (MBC-AR) to estimate their batch extent potential decontamination mechanism for fluoride ion removal from aqueous solution. Various characterization techniques have been analyzed to study the functional groups, including FT-IR, XRD, EDS, SEM, FE-SEM, TEM and VSM of the synthesized adsorbent (MBC-AR). Several adequate batch adsorption studies were performed to ascertain the equilibrium state. The research yielded a well-established langmuir adsorption isotherm with a capacity for adsorption of 96.4 mg/g, and it suited well to a pseudo-second-order kinetic model. According to reports, the MBC-AR is a useful bio-adsorbent for eliminating fluoride ions from wastewater and other large-scale uses. At room temperature (298 K), the effects of bio-adsorbent doses (10–150 mg), initial concentration of adsorbate taken (20–80 mg/L), pH value (2.0–10.0), as well as contact time (0–250 min) were assessed for fluoride removal using MBC-AR. The efficacy of adsorption and its statistical data were well-established with a pseudo-second-order mechanism and Langmuir isotherm ( R 2 = 0.99). It was determined that the highest adsorption efficacy and capacity were 96.4 mg/g in the phase equilibrium process.
engineering, chemical, environmental,water resources