Abstract:A novel complex-phase steel alloy is conceived with a deliberately unstable austenite, $\gamma$, phase that enables the deformation-induced martensitic transformations (DIMT) to be explored at low levels of plastic strain. The DIMT was thus explored, in-situ and non-destructively, using both far-field Three-Dimensional X-Ray Diffraction (3DXRD) and Electron Back-Scatter Diffraction (EBSD). Substantial $\alpha'$ martensite formation was observed under 10% applied strain with EBSD, and many $\varepsilon$ grain formation events were captured with 3DXRD, indicative of the indirect transformation of martensite via the reaction $\gamma \rightarrow \varepsilon \rightarrow \alpha'$. Using $\varepsilon$ grain formation as a direct measurement of $\gamma$ grain stability, the influence of several microstructural properties, such as grain size, orientation and neighbourhood configuration, on $\gamma$ stability have been identified. Larger $\gamma$ grains were found to be less stable than smaller grains. Any $\gamma$ grains oriented with {100} parallel to the loading direction preferentially transformed with lower stresses. Parent $\varepsilon$-forming $\gamma$ grains possessed a neighbourhood with increased ferritic/martensitic volume fraction. This finding shows, unambiguously, that $\alpha$/$\alpha'$ promotes $\varepsilon$ formation in neighbouring grains. The minimum strain work criterion model for $\varepsilon$ variant prediction was also evaluated, which worked well for most grains. However, $\varepsilon$-forming grains with a lower stress were less well predicted by the model, indicating crystal-level behaviour must be considered for accurate $\varepsilon$ formation. The findings from this work are considered key for the future design of alloys where the deformation response can be controlled by tailoring microstructure and local or macroscopic crystal orientations.

Interaction of martensitic microstructures in adjacent grains

Modifying macroscale variant combinations in a two-dimensional structure using mechanical loadings during thermally induced transformation

Computational Martensite Re-Orientation in Shape Memory Alloys and the Related Hysteretic Dynamics

Grain Boundary Motion in Two-Dimensional Hexagonal Boron Nitride.

Grain boundary-induced martensitic transformations: A phase-field study of nucleation, size-effect, triple junction-effect, microstructures, and compatibility at the nanoscale

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Modulated Martensite: Why it forms and why it deforms easily

Intrinsic mechanism of grain size effect and grain boundary misorientation angle effect on crack propagation in martensitic steels

Observation of the two way shape memory effect in an atomistic model of martensitic transformation

Contrasting the dynamics of elastic and non-elastic deformations across an experimental colloidal Martensitic transition

Grain-level effects on in-situ deformation-induced phase transformations in a complex-phase steel using 3DXRD and EBSD

Grain boundary network plasticity: reduced-order modeling of deformation-driven microstructure evolution

On non stress-free junctions between martensitic plates

Non-affine fields in solid-solid transformations: the structure and stability of a product droplet

A micro-mechanical model of non-thermo-elastic martensitic transformation

Crystallographic analysis of martensitic transformation in an iron-nickel alloy with twinned martensite

Defect-induced incompatibility of elastic strains: dislocations within the Landau theory of martensitic phase transformations

Analysis of microstructure evolution during tensile stress induced martensitic transformations

Intergranular fracture, grain-boundary structure, and dislocation-density interactions in FCC bicrystals

Atomistic simulation of martensite microstructural evolution during temperature driven $β\rightarrow α$ transition in pure titanium

Derived Crystal Structure of Martensitic Materials by Solid-Solid Phase Transformation