A zero-depth nanopore capillary for the analysis of translocating biomolecules

Hadi Arjmandi-Tash,Amedeo Bellunato,Chenyu Wen,René C. Olsthoorn,Ralph H. Scheicher,Shi-Li Zhang,Grégory F. Schneider

DOI: https://doi.org/10.48550/arXiv.1707.07933

2017-07-25

Abstract:High-fidelity analysis of translocating biomolecules through nanopores demands shortening the nanocapillary length to a minimal value. Existing nanopores and capillaries, however, inherit a finite length from the parent membranes. Here, we form nanocapillaries of zero depth by dissolving two superimposed and crossing metallic nanorods, thereby opening two overlapping nanofluidic channels molded in a polymeric resin. In an electrolyte, the interface shared by the crossing fluidic channels is mathematically of zero thickness and defines the narrowest constriction in the stream of ions through the nanopore device. This novel architecture provides the possibility to design nanopore fluidic channels, particularly with a robust 3D architecture maintaining the ultimate zero thickness geometry independently of the thickness of the fluidic channels. With orders of magnitude reduced biomolecule translocation speed, and lowered electronic and ionic noise compared to nanopores in 2D materials, our findings establish interfacial nanopores as a scalable platform for realizing nanofluidic systems, capable of single-molecule detection.

Biological Physics,Applied Physics,Instrumentation and Detectors

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: **To achieve high - fidelity analysis of biomolecules passing through nanopores by shortening the length of nanopores, especially for single - molecule detection and high - resolution sequencing**.

### Specific Problems and Solutions

1. **Limitations of Existing Nanopores**
- Existing nanopores and capillaries cannot achieve extremely short channel lengths due to the limited thickness of their mother membranes. This restricts their application in high - resolution biomolecule analysis.

2. **Proposing Zero - Depth Interfacial Nanopore**
- To solve the above problems, the authors propose a new nanopore structure - **zero - depth interfacial nanopore capillaries**. This structure forms two overlapping nanofluidic channels by dissolving two superimposed and crossed metal nanorods, and these channels are embedded in a polymer resin. In the electrolyte, the interface shared by the cross - fluidic channels is mathematically of zero thickness and defines the narrowest constriction point when the ion flow passes through the nanopore device.

3. **Advantages and Features**
- **Geometric Structure**: This new architecture can maintain a final zero - thickness geometry independent of the thickness of the fluidic channels while maintaining a robust three - dimensional structure.
- **Performance Improvement**: Compared with nanopores in two - dimensional materials, this design significantly reduces the traversing speed of biomolecules and reduces electron and ion noise.
- **Application Prospects**: This finding makes the interfacial nanopore a scalable platform for realizing nanofluidic systems and enables single - molecule detection.

### Mathematical Model and Experimental Verification

- **Formula Representation**
- The overall access resistance \(R_t\) of the interfacial nanopore can be represented by the following formula:
\[
R_t=\frac{\gamma F(a, b, h)}{\pi a b q c_n(\mu^++\mu^-)}
\]
where:
- \(c\) is the salt concentration in the electrolyte,
- \(q = 1.6\times10^{-19}\, \text{C}\) is the elementary charge,
- \(\mu^+\) and \(\mu^-\) are the mobilities of cations and anions respectively,
- \(a\) and \(b\) are the widths of the upper and lower channels,
- \(h\) is the thickness of the plate,
- \(F\) is a function depending on geometric parameters,
- \(\gamma\) and \(n\) are fitting parameters used to consider the effect of double - layer formation on the linearity of the current.

### Experimental Results

- **DNA Molecule Traversal**
- The experimental results show that the time for DNA molecules to traverse the interfacial nanopore is significantly extended, with an average of about 22 milliseconds, which is much longer than the traversal time of traditional nanopores (from a few nanoseconds to tens of nanoseconds). This indicates that the interfacial nanopore has stronger molecule - wall interactions, thus slowing down the traversal speed of molecules.

- **Noise Characteristics**
- The high - frequency noise of the interfacial nanopore is at least one order of magnitude lower than that of traditional nanopores, and the low - frequency noise is also significantly lower than that of two - dimensional nanopores. This gives the interfacial nanopore significant advantages in high - resolution sequencing and single - molecule detection.

In conclusion, this paper solves the limitations of existing nanopores in high - resolution biomolecule analysis by introducing zero - depth interfacial nanopores, providing a new way to achieve high - fidelity single - molecule detection and high - resolution sequencing.