Abstract:Rapid Compression Machines (RCMs) are well-established facilities to validate kinetic models in the mid-to-low-temperature regime for moderate to high pressures. The wide range of measurable ignition delay times (IDTs) is a substantial extension to shock tubes and other facilities. However, the interpretation of RCM experiments is challenging and therefore the reliability of such measurements might be questioned. This study aims to prove the value of RCM experiments as validation targets. Firstly, a newly elaborated kinetic model for ethanol is validated against the widest experimental space performed for ethanol IDT experiments within a single facility, including six pressures between 10 and 40 bar, nine dilution ratios between fDil= 2–10 ( fDil=XDil / XO2 ) and seven equivalence ratios ranging from φ= 0.5 to 2.0 within a temperature range between 780 K and 980 K. The kinetic model resulting from the validation process is used to explore potential limitations in the experimental spectrum of the studied RCM. Therefore, modification of the facility towards unconventional operational conditions are used to prove the applicability of the adiabatic core hypothesis and therefore the legitimization of RCM experiments even under critical operational circumstances. These modifications include the variation of the compression characteristic from a distinct piston creep towards an almost abrupt stopping and the usage of different crevice geometries, including an uncreviced piston. Additionally, the influence of the initial temperature was investigated separately and the dead volume of the reactor was drastically decreased and also increased. This huge amount of experiments and corresponding simulations are a profound and reliable basis for statistical analysis to formulate meaningful statements about the validity of the comparison of kinetic simulation against RCM experiments. For the developed model, 93 % of all simulated IDTs are within ± 25 % of measured IDT between 5–150 ms. Novelty and significance statement This is the first study to experimentally prove the validity of RCM ignition delay time experiments for the broadest validation space and operational parameter space on ethanol within a single facility so far. Significant changes in the compression characteristic and the break-behavior of the piston system, the reactor piston crevice geometry, the reactor dead volume, and the initial temperature could show the direct effect of the measured ignition delay time but also the ability of a single kinetic model to cover these facility effects. Here, the special design of the HGD RCM allows the variation of all these parameters under otherwise similar boundary conditions and thus a direct experimental comparison, which makes this the first comprehensive study of the most essential facility-related effects in RCM experiments on the measured ignition delay time and their corresponding simulations.

On the uncertainty of temperature estimation in a rapid compression machine

Temperature Non-Uniformity and Its Effects on Auto-Ignition in a Rapid Compression Machine

Promoting “adiabatic Core” Approximation in a Rapid Compression Machine by an Optimized Creviced Piston Design

Numerical Study Toward Fast Intermediate Species Sampling with High Accuracy in a Rapid Compression Machine

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

Finding a common ground for RCM experiments. Part B: Benchmark study on ethanol ignition

Finding a common ground for RCM experiments. Part A: On the influences of facility effects regarding the reliability of experimental validations

A Controlled Trajectory Rapid Compression and Expansion Machine (CT-RCEM) for Chemical Kinetic Investigations

UConnRCMPy: Python-based data analysis for rapid compression machines

A Rapid Compression Machine Coupled with Time-Resolved Molecular Beam Mass Spectrometry for Gas-Phase Kinetics Studies.

Global Uncertainty Analysis for the RRKM/master Equation Modeling of a Typical Multi-Well and Multi-Channel Reaction System

Forward and reverse uncertainty analyses for RRKM/master equation based kinetic predictions: A case study of ethyl with oxygen

Uncertainty analysis of the kinetic model prediction for high-pressure H 2 /CO combustion

Evaluation of Non-Ideal Piston Stopping Effects on the “adiabatic Core” and Ignition Delay Time Simulation in Rapid Compression Machines

Reaction propagation, leading to developing detonation, in a rapid compression machine

The Auto-Ignition Behaviors of HMX/NC/NG Stimulated by Heating in a Rapid Compression Machine

On the Rational Interpretation of Data on Laminar Flame Speeds and Ignition Delay Times

Monte Carlo Simulation for Radiative Transfer in a High-Pressure Industrial Gas Turbine Combustion Chamber

On the Intelligent Optimization of the Crevice Structure in a Rapid Compression Machine

Quantifying Kinetic Uncertainty in Turbulent Combustion Simulations Using Active Subspaces

Radiation-induced Uncertainty in Laminar Flame Speed Measured from Propagating Spherical Flames