Abstract:Magnetoelectric (ME)-based magnetometers have garnered much attention as they boast ultra-low-power systems with a small form factor and limit of detection in the tens of picotesla. The highly sensitive and low-power electric readout from the ME sensor makes them attractive for near DC and low-frequency AC magnetic fields as platforms for continuous magnetic signature monitoring. Among multiple configurations of the current ME magnetic sensors, most rely on exploiting the mechanically resonant characteristics of a released ME microelectromechanical system (MEMS) in a heterostructure device. Through optimizing the resonant device configuration, we design and fabricate a fixed-fixed resonant beam structure with high isolation compared to previous designs operating at ~800 nW of power comprised of piezoelectric aluminum nitride (AlN) and magnetostrictive (Co1-xFex)-based thin films that are less susceptible to vibration while providing similar characteristics to ME-MEMS cantilever devices. In this new design of double-clamped magnetoelectric MEMS resonators, we have also utilized thin films of a new iron-cobalt-hafnium alloy (Fe0.5Co0.5)0.92Hf0.08 that provides a low-stress, high magnetostrictive material with an amorphous crystalline structure and ultra-low magnetocrystalline anisotropy. Together, the improvements of this sensor design yield a magnetic field sensitivity of 125 Hz/mT when released in a compressive state. The overall detection limit of these sensors using an electric field drive and readout are presented, and noise sources are discussed. Based on these results, design parameters for future ME MEMS field sensors are discussed.

New method for torque magnetometry using a commercially available membrane-type surface-stress sensor

A resonant magnetic microsensor based on magnetic torque with piezoresistive readout

Highly Sensitive Magneto-Mechano-Electric Magnetic Field Sensor Based on Torque Effect

Development of an Inductively Coupled Magnetoelastic Torque Sensor

Recent advances in mechanical torque studies of small-scale magnetism

Development of a Compliant Magnetic 3-D Tactile Sensor with AMR Elements.

A Miniature Resonant and Torsional Magnetometer Based on Lorentz Force

Design of a Non-Contact Radial Torque Sensor with Variable Torque Range by Electromagnetic Coil Coupling with Piezoelectric Sensor

A MEMS torsional resonant magnetometer for the attitude determination in space

3D MOKE spin-orbit torque magnetometer

Development of Multi-Axes CMOS-MEMS Resonant Magnetic Sensor Using Lorentz and Electromagnetic Forces

Simultaneous three-axis torque measurements of micromagnetism

Stress-Driven Magnetic Barkhausen Noise Generation in FeCo Magnetostrictive Alloy

Torque Differential Magnetometry Using the Qplus Mode of a Quartz Tuning Fork

Measurement of the angle dependence of magnetostriction in pulsed magnetic fields using a piezoelectric strain gauge

Design and Analyses of a MEMS Based Resonant Magnetometer

High Isolation, Double-Clamped, Magnetoelectric Microelectromechanical Resonator Magnetometer

100pTcm Sensitive MEMS Resonant Magnetometer from a Commercial Accelerometer

Enhanced magnetoelectric effect in a stress-biased lead magnesium niobate-lead titanate single crystal/Terfenol-D alloy magnetoelectric sensor

Flexible Tri-Axis Tactile Sensor Using Spiral Inductor and Magnetorheological Elastomer

On-chip scalable optomechanical magnetometers