Abstract:Abstract There is an increasing need for the use of additive manufacturing (AM) to produce improved critical application engineering components. However, the materials manufactured using AM perform well below their traditionally manufactured counterparts, particularly for creep and fatigue. Research has shown that this difference in performance is due to the complex relationships between AM process parameters which affect the material microstructure and consequently the mechanical performance as well. Therefore, it is necessary to understand the impact of different AM build parameters on the mechanical performance of parts. Machine learning (ML) models are able to find hidden relationships in data using iterative statistical analyses and have the potential to develop process–structure–property–performance relationships for manufacturing processes, including AM. The aim of this work is to apply ML techniques to materials testing data in order to understand the effect of AM process parameters on the creep rate of additively built nickel-based superalloy and to predict the creep rate of the material from these process parameters. In this work, the predictive capabilities of ML and its ability to develop process–structure–property relationships are applied to the creep properties of laser powder bed fused alloy 718. The input data for the ML model included the Laser Powder Bed Fusion (LPBF) build parameters used—build orientation, scan strategy and number of lasers—and geometrical material descriptors which were extracted from optical microscope porosity images using image analysis techniques. The ML model was used to predict the minimum creep rate of the Laser Powder Bed Fused alloy 718 samples, which had been creep tested at $$650\,^\circ $$ 650 ∘ C and 600 MPa. The ML model was also used to identify the most relevant material descriptors affecting the minimum creep rate of the material (determined by using an ensemble feature importance framework). The creep rate was accurately predicted with a percentage error of $$1.40\%$$ 1.40 % in the best case. The most important material descriptors were found to be part density, number of pores, build orientation and scan strategy. These findings show the applicability and potential of using ML to determine and predict the mechanical properties of materials fabricated via different manufacturing processes, and to find process–structure–property relationships in AM. This increases the readiness of AM for use in critical applications.

Creep Assessment Of Thermoplastic Materials For Non-Structural Components In Marine Engines

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Creep-Fatigue Behavior and Crack Analysis of Ti-6Al-4V ELI

Life Cycle Assessment and Experimental Mechanical Investigation of Test Samples for High-Performance Racing Boats

On the Hydrodynamic and Structural Performance of Thermoplastic Composite Ship Propellers Produced by Additive Manufacturing Method

Characterization of the effect of creep and multiaxial loading situations on fatigue of short fiber reinforced thermoplastics

Creep-fatigue and Cyclically Enhanced Creep Mechanisms in Aluminium Based Metal Matrix Composites

Mock-up conception for experimentally investigate the creep phenomenon caused by the fluid–structure interaction in a rod bundle

Creep-fatigue Behaviour of Aluminum Alloy-Based Metal Matrix Composite

Flexural response of additive-manufactured honeycomb sandwiches for marine structural applications

Creep and Recovery Behaviour of Polyolefin-Rubber Nanocomposites Developed for Additive Manufacturing

Comparative life cycle assessment of carbon fiber reinforced compositecomponents for automotive industry

Machine learning to determine the main factors affecting creep rates in laser powder bed fusion

A Novel Creep-Fatigue Life Evaluation Method for Ceramic-Composites Components

On Creep Fatigue Interaction of Components at Elevated Temperature

Statistical analysis of creep behavior in thermoset and thermoplastic composites reinforced with carbon and glass fibers

Analysis of the Creep Mechanism of Low-Alloy Steel in Terms of Plastic Deformation

Analysis and numerical investigations on the temperature-dependent creep behavior of polypropylene matrix composite used for coating of offshore pipeline

Creep and Recovery Behavior of Continuous Fiber-Reinforced 3DP Composites

Prediction of long-term creep response: accelerated characterization of industrial nylon6,6 and HMLS PET filaments

Cyclic creep strain rate criterion for short-fibre reinforced thermoplastics: Validation of creep and fatigue performance across a wide range of load ratios