Abstract:Large inconsistencies still exist in nuclear data libraries regarding the kinetic parameters of delayed neutron (DN) precursors. As an example, there is a 17% gap between ENDF-B/VIII.0 and JEFF-3.3 on the average lifetime T 1/2 of DN precursors from thermal fission of 235 U. This parameter is of major importance for reactivity predictions of nuclear reactors in nominal or accidental configurations. In this context, CEA is actively participating to the ALDEN project (Average number and Lifetime of DElayed Neutrons) which aims at providing the nuclear data community with new data sets of DN from thermal and fast neutron induced fission of various actinides. A dedicated experimental setup was designed and optimized for that purpose and is presented in this paper. It consists of a "long counter" detector containing 16 proportional counters filled with 3 He, embedded in a high density polyethylene matrix. The detector surrounds a fissile target prepared in the form of a miniature fission chamber, containing a few hundreds of micro-grams of fissile material. This set-up is connected to fast and efficient neutron shutters that can produce step-irradiations of variable durations. The equations driving the DN counting following step-irradiations of the fissile target are established and discussed in the perspective of DN yield or group parameter measurement. A comprehensive analysis of the different steps of data reduction is detailed: dead time characterization, Region of Interest (ROI) determination, absolute and relative efficiency calibration, fission rate estimation, irradiation time and background determination, DN decay curve production and physical parameter fitting. Following a prototype experiment performed in 2018 at the PF1b cold neutron beam line of Institute Laue Langevin (ILL, Grenoble, France), we discuss here the analysis of two campaigns occurring in 2019 and 2021 in which significant improvements were achieved in terms of background minimization, counting statistics and fission rate determination. The achievements of this work are the measurement of the delayed neutron emission per fission for the thermal neutron induced fission of 235 U, estimated at (1.625 ± 0.010) % and the group parameters leading to an estimated lifetime of = (8.87 ± 0.10) s. Those results are consistent with the values recommended by the IAEA/CRP work and they come with reduced uncertainties compared with previously published results.

High Quality Actinide Targets

Targets for Precision Measurements

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Production of Heavy Actinides from Interactions Ofo16,o

Cross section measurement for the 232Th(n, f) reaction in the 4.50 ~ 5.40 MeV region using a time projection chamber

Obtaining high resolution excitation functions with an active thick-target approach and validating them with mirror nuclei

Development of radioactive beams at ALTO: Part 2. Influence of the UCx target microstructure on the release properties of fission products

1H(n,el) as a Cross Section Reference in a White Source Neutron Beam With the fissionTPC

Fabrication of 208 Pb and 193 Ir targets on Al–backing using high/ultra-high vacuum deposition technique for low-energy nuclear reaction experiments

Remeasurement of the $^{239}$Pu(n,f)/$^{235}$U(n,f) Cross-Section Ratio with the NIFFTE fission Time Projection Chamber Using Vapor-deposited Targets

Novel materials for next-generation accelerator target facilities

Fabrication and characterization of highly enriched thin 176 Yb targets for the reaction dynamic studies on fission mass distribution

Production and measurement of fission product noble gases

Designing an upgrade of the Medley setup for light-ion production and fission cross-section measurements

Accurate measurements of delayed neutron data for reactor applications: methodology and application to 235U(nth,f)

A Time Projection Chamber for High Accuracy and Precision Fission Cross Section Measurements

Sputtering of targets in high-intensity heavy-ion beam experiments

Accurate fission data for nuclear safety

R&D of a MW-class Solid-Target for a Spallation Neutron Source

Neutron-induced fission reaction studies with minor actinides using a double Frisch grid fission detector

Study on the Edge-Cooling Target Structure for Transportable Accelerator-Driven Neutron Source