Abstract:Metallic glasses are frequently used as structural materials. Therefore, it is important to develop methods to predict their mechanical response as a function of the microstructure prior to loading. We develop a coarse-grained spring network model, which describes the mechanical response of metallic glasses using an equivalent series network of springs, which can break and re-form to mimic atomic rearrangements during deformation. To validate the model, we perform simulations of quasistatic, uniaxial tension of Lennard-Jones and embedded atom method (EAM) potentials for Cu$_{50}$Zr$_{50}$ metallic glasses. We consider samples prepared using a wide range of cooling rates and with different amounts of crystalline order. We show that both the Lennard-Jones and EAM models possess qualitatively similar stress $\sigma$ versus strain $\gamma$ curves. By specifying five parameters in the spring network model (ultimate strength, strain at ultimate strength, slopes of $\sigma(\gamma)$ at $\gamma=0$ and at large strain, and strain at fracture where $\sigma=0$), we can accurately describe the form of the stress-strain curves during uniaxial tension for the computational studies of Cu$_{50}$Zr$_{50}$, as well as recent experimental studies of several Zr-based metallic glasses. For the computational studies of Cu$_{50}$Zr$_{50}$, we find that the yield strain distribution is shifted to larger strains for slowly cooled glasses compared to rapidly cooled glasses. In addition, the average number of new springs and their rate of formation decreases with decreasing cooling rate. These effects offset each other at large strains, causing the stress-strain curve to become independent of the sample preparation protocol in this regime. In future studies, we will extract the parameters that define the spring network model directly from atomic rearrangements that occur during uniaxial deformation.

Atomistic origin of stress overshoots and serrations in a CuZr metallic glass

Local stress analysis in Cu$_{50\%}$Zr$_{50\%}$ metallic glass under shear strain by means of first principle modeling

Structural relaxation and delayed yielding in cyclically sheared Cu-Zr metallic glasses

Formation and dilatation of shear bands in a Cu-Zr metallic glass: A free volume perspective

Atomistic understanding of creep and relaxation mechanisms of Cu64Zr36 metallic glass at different temperatures and stress levels

First-principles atomic level stresses: application to a metallic glass under shear

Revealing in situ stress-induced short- and medium-range atomic structure evolution in a multicomponent metallic glassy alloy

Strain-dependent Transition of the Relaxation Dynamics in Metallic Glasses

Initiation and Evolution of Shear Bands in Bulk Metallic Glass under Tension—an in Situ Scanning Electron Microscopy Observation

Fatigue behavior of Cu-Zr metallic glasses under cyclic loading

Atomic-scale Mechanisms of Tension–compression Asymmetry in a Metallic Glass

On the Serrated Behavior during Plastic Deformation of a Zr-Based Bulk Metallic Glass

Serration Behavior of A Zr-Based Metallic Glass under Different Constrained Loading Conditions

Atomic-level mechanism of elastic deformation in the Zr-Cu metallic glass

Characterizing the mechanical response of metallic glasses to uniaxial tension using a spring network model

Effect of Applied Stress on the Mechanical Properties of a Zr-Cu-Ag-Al Bulk Metallic Glass with Two Different Structure States

Strain-dependent shear-band structure in a Zr-based bulk metallic glass

Hidden order in serrated flow of metallic glasses

The Multiple Shear Bands and Plasticity in Metallic Glasses: A Possible Origin from Stress Redistribution

Uncovering the structural origin of shear banding in metallic glasses via tracing back to the critical glass transition process