Abstract:BiFeO3-based materials have received extensive attention in electronic device applications due to their high Curie temperature and large electromechanical response. In this study, new solid solutions of (1-x)BiFeO3-xCaSnO3 (BF-CS) ceramics were successfully synthesized via conventional solid-state reaction method. With increasing CS content, the ceramics exhibit a single-phase perovskite and the structure changes from a main rhombohedral phase with a small amount of impurity phase to a stable rhombohedral phase and then to MPB region separating the rhombohedral and orthorhombic phases in the composition of 0 ≤ x ≤ 0.15, indicating that introducing CS can stabilize the perovskite structure formed in the sintering process. Unfortunately, the solid solubility limit of CS into BF perovskite structure is reached when x > 0.15. The dielectric peak associated with oxygen vacancies become weaker and finally disappear at x = 0.15. Moreover, the ceramics with x = 0.12–0.15 feature saturated and square-shaped P-E hysteresis loops with increased polarization can be attributed to effectively promote domain switching process at MPB, in which the highest piezoelectric coefficient d 33 = 259 pC/N can be ascribed to the combined effect of coexistence phases, high relative bulk density and low leakage current. In particular, a partial phase diagram is constructed in terms of temperature and composition, which helps to understand the structure-property relations. The distinct structures and phase transition behavior on each side of the vertical MPB line offer the guidelines and strategy to design other BF-based binary or ternary solid solutions with enhanced piezoelectric property in high temperature application.

Synthesis and Research of the Phase Formation of Solid Solutions of Bismuth Chromates in the Triple Systems MeO–Cr2O3–Bi2O3 (Me = Sr, Ca)

Ceramic materials based on bismuth chromates, their synthesis by combustion with mannitol, photocatalytic and conductive properties

Synthesis and Characterization of a Pyrochlore Solid Solution in the Na2O‐Bi2O3‐TiO2 System

Molten salt synthesis of orthorhombic CrB and Cr2AlB2 ceramics

Preparation and properties of Ba(Sn0.1Ti0.9)O-3 powders by molten salt method

Oxide ion conducting solid electrolytes based on Bi2O3

Effect of Synthesis Conditions on Microstructure and Multiferroic Properties of Magnetoelectric Ca2Bi4Ti3.5Mn1.5O18 Solid Solutions

Phase formation, microstructural and dielectric properties of bismuth ferrite nanoceramics synthesized by low-temperature molten salt flux route

Synthesis and Crystal Structure of Sr3Bi2O6 and Structural Change in the Strontium-Bismuth-oxide System

Synthesis and Physico-Chemical Properties of La0.9Sr0.1Sc1 – xMnxO3 – δ Ceramic Materials with Mixed Electronic and Ionic Conductivity

Semi-oxalate synthesis of (1−x)BaTiO3−xM0.5Bi0.5TiO3 (M = Li, Na, K) PTCR materials

Phase Transition and Electric Properties of (1 − X)batio3–xsr1.9ca0.1nanb5o15 Perovskite Solid Solutions

Influence of R=Y, Gd, Sm on Crystallization and Sodium Ion Conductivity of Na5RSi4O12 Phase

Effect of the Composition of the Ceramics (MCeMgSr)O2-δ (M = Y, Sm) on the Microstructure, Mechanical and Electrical Properties for Solid Electrolyte

Synthesis, structural stability and phase diagram of BiFeO3–CaSnO3 ceramics

Molten Salt Synthesis of Bismuth Ferrite Nano‐ and Microcrystals and Their Structural Characterization

Synthesis, structure and properties of doped Bi2O3

Novel cathode material for solid oxide fuel cells based on Ba-doped Sr2Fe1.5Mo0.5O6

Synthesis, microstructural characterization, and dielectric properties of BiFeO3 microcrystals derived from molten salt method

B-site substitutions and phase transitions in solid solutions on the base of (Na0.5Bi0.5)TiO3

Phase Transition, Raman Spectra, Infrared Spectra, Band Gap And Microwave Dielectric Properties Of Low Temperature Firing (Na0.5xbi1-0.5x)(Moxv1-X)O-4 Solid Solution Ceramics With Scheelite Structures