Abstract:Ultrafast all-optical signal processing techniques are expected to play a major role in future ultrafast single-carrier soliton systems, because they remove the electronics bottleneck. In this paper, two all-optical devices, the nonlinear optical loop mirror (NOLM) and the Kerr fiber modulator (KFM), are used to achieve major functions related to high bit rate soliton links. At the interface with existing networks, conversions from data at the nonreturn-to-zero (NRZ) format to return-to-zero (RZ) and soliton data, and vice-versa are required. These two conversions are demonstrated through NOLMs, and their limitations investigated. However, the main part of this paper is devoted to in-line soliton regeneration through synchronous modulation. Synchronous modulation requires both clock recovery and in-line optical modulation. In the following, all-optical approaches for these two functions are considered separately, before being associated in a true all-optical regenerator. All-optical clock recovery techniques are first reviewed. An experimental implementation of one of these techniques is described. On the other hand, all-optical modulation can be done either with intensity or phase modulators. We initially proposed the NOLM as all-optical intensity modulator. We analyze it theoretically, both from the component and the system application viewpoints. A modified configuration of the NOLM, having two optical controls, removes some limitations pertaining to the single-control configuration, yielding even higher performance. The other all-optical synchronous modulator considered here is the KFM, which is a pure phase modulator. Its potential is demonstrated in a 20-Gb/s soliton transmission experiment, when driven by an optoelectronic optical clock generation device. Issues specific to the implementation of both types of all-optical fiber-based modulators are discussed. Finally, a true all-optical synchronous regenerator, combining all-optical clock recovery circuit and KFM, is tested in an actual soliton transmission experiment at 20 Gb/s.

Integrated all-optical pulse restoration with coupled nonlinear microring resonators

Slow and fast nonlinearities in microfiber resonators

Transparent Optical Signal Regeneration Using a Nonlinear Bistable Device

160-Gb/s NRZ-to-PSK Conversion Using Linear Filtering in Silicon Ring Resonators

Nonlinear integrated optical resonators for optical fibre data recovery

All-Optical Nrz-To-Ami Conversion Using Linear Filtering Effect of Silicon Microring Resonator

Towards a photonic integrated all-optical phase regenerator

Simultaneous All‐optical Amplification, Inversion and Format Conversion Based on Self‐induced Nonlinear Effects in a Semiconductor Optical Amplifier

Parametric All-Optical Modulation on Chip

All-optical simultaneous OR and AND optical logic gates based on nonlinear photonic crystal ring resonator

All-optical fiber signal processing and regeneration for soliton communications

All-optical Signal Regeneration and Coherent Data Receiving Aided by Integrated Kerr Frequency Comb

Inverse-designed non-reciprocal pulse router for chip-based LiDAR

All-Optical Clock Recovery From 40 Gbit/S Rz Signal Based On Microring Resonators

Generalized fast, slow, stop, and store light optically within a nanoring resonator

Parametric all-optical modulation on a chip

Nonlinear optical bistability in microring resonators for enhanced phase sensing

Self-phase-modulation based all-optical regeneration of PDM signals using a single section of highly-nonlinear fiber

Time delay reservoir computing with a silicon microring resonator and a fiber-based optical feedback loop

All-fiber Ultrafast Laser Generating Gigahertz-Rate Pulses Based on a Hybrid Plasmonic Microfiber Resonator

Optical Frequency Comb Generation by Cascaded Second-Order Nonlinear Effect in A Quasi-Phase Matched Micro-Ring Resonator